Tunable and highly sensitive temperature sensor based on graphene photonic crystal fiber

Optical fiber temperature sensors have been widely employed in enormous areas ranging from electric power industry, medical treatment, ocean dynamics to aerospace. Recently, graphene optical fiber temperature sensors attract tremendous attention for their merits of simple structure and direct power detecting ability. However, these sensors based on transfer techniques still have limitations in the relatively low sensitivity or distortion of the transmission characteristics, due to the unsuitable Fermi level of graphene and the destruction of fiber structure, respectively. Here, we propose a tunable and highly sensitive temperature sensor based on graphene photonic crystal fiber (Gr-PCF) with the non-destructive integration of graphene into the holes of PCF. This hybrid structure promises the intact fiber structure and transmission mode, which efficiently enhances the temperature detection ability of graphene. From our simulation, we find that the temperature sensitivity can be electrically tuned over four orders of magnitude and achieve up to ～ 3.34×10^-3 dB/(cm·℃) when the graphene Fermi level is ～ 35 meV higher than half the incident photon energy. Additionally, this sensitivity can be further improved by ～ 10 times through optimizing the PCF structure (such as the fiber hole diameter) to enhance the light-matter interaction. Our results provide a new way for the design of the highly sensitive temperature sensors and broaden applications in all-fiber optoelectronic devices.     

水/气多介质问题的界面处理方法

针对不可压缩可压缩水/气多介质问题, 提出一种新的界面处理方法。在可压缩水/气界面处构造Riemann问题, 在水中设音速趋于无穷大, 求解Riemann问题得到不可压缩可压缩水/气界面处流体的准确流动状态; 然后以此状态结合GFM(ghost fluid method)方法分别为2种流体定义界面边界条件, 将两相流问题转化为单相流问题计算, 通过求解level set方程来跟踪界面的位置。对各种不同的界面边界条件定义方法进行了比较, 数值模拟结果表明算法能准确地捕捉各类间断的位置, 证明了算法的有效性和稳健性。     

Zn or O? An Atomic Level Comparison on Antibacterial Activities of Zinc Oxides

For the first time, the influence of different types of atoms (Zn and O) on the antibacterial activities of nanosized ZnO was quantitatively evaluated with the aid of a 3D‐printing‐manufactured evaluation system. Two different outermost atomic layers were manufactured separately by using an ALD (atomic layer deposition) method. Interestingly, we found that each outermost atomic layer exhibited certain differences against gram‐positive or gram‐negative bacterial species. Zinc atoms as outermost layer (ZnO?Zn) showed a more pronounced antibacterial effect towards gram‐negative E. coli (Escherichia coli), whereas oxygen atoms (ZnO?O) showed a stronger antibacterial activity against gram‐positive S. aureus (Staphylococcus aureus). A possible antibacterial mechanism has been comprehensively discussed from different perspectives, including Zn²⁺ concentrations, oxygen vacancies, photocatalytic activities and the DNA structural characteristics of different bacterial species.     

The impact of a conceptual model-based mathematics computer tutor on multiplicative reasoning and problem-solving of students with learning disabilities

The study explored the impact of Please Go Bring Me-COnceptual Model-based Problem Solving (PGBM-COMPS) computer tutoring system on multiplicative reasoning and problem solving of students with learning disabilities. The PGBM-COMPS program focused on enhancing the multiplicative reasoning and problem solving through nurturing fundamental mathematical ideas and moving students above and beyond the concrete level of operation. This is achieved by taking advantages of the constructivist approach from mathematics education and explicit conceptual model-based problem solving approach from special education. Participants were three elementary students with learning disabilities (LD). A mixed method design was employed to investigate the effect of the PGBM-COMPS program on enhancing students’ multiplicative reasoning and problem solving. It was found that the PGBM-COMPS program significantly improved participating students’ problem solving performance not only on researcher developed criterion tests but also on a norm-referenced standardized test. Qualitative and quantities data from this study indicate that, in addition to nurturing fundamental concept of composite units, it is necessary to help students to understand underlying problem structures and move toward mathematical model-based problem representation and solving for generalized problem solving skills.     

Frequencies Rotation at High Sound Pressure Levels Toward Low Frequencies

Today, analyzing of sound pressure level and frequency is considered as an important index in human society. Sound experts believe that analyzing of these parameters can help us to better understanding of work environments. Sound measurements and frequency analysis did to fix the harmful frequency in all sections in Shiraz gas power plant with sound analyzer model BSWA 308. The sound pressure levels (L_P) and the one and one-third octave band were continuously measured in A and C weighting networks and slow mode for time response. Excel 2013 and Minitab 18.1 software used for statistical calculations. Results analyzed by Minitab 18.1 software. The highest harmful frequency in Shiraz Gas Power Plant (SGPP) was 50 Hz with 115 dB. The sound pressure level (SPL) ranged from 45 dB to 120 dB in one-third octave band and weighting network C. The maximum sound pressure level was in Craft electricity generator with 105.3 dB and 67 Hz. Sound pressure level in surrounded environment was 120 dB. According to the results, in this industry the sound pressure level exceeded the Occupational Exposure Level of Iran (OEL). The value of sound pressure level were higher than the Standard of occupational health. SGPP consumes 47000 cubic meters of natural gas per hour to produce 100 MW (Mega Watt) of electricity. It is very high and it is not economical and cost effective. These numbers indicate that the power plant’s efficiency is low. It could be concluded that the noise pollution is an important issue in these industries. Moreover, SGPP produce noise with loss energy. Frequencies rotation at high sound pressure levels toward low frequencies were happened.     

Multi-guasiparticle excitations of ~(91)Ru

The level structure in neutron-deficient nucleus 91Ru was investigated via the 58Ni(36Ar,2 plnγ)Ru reaction at a beam energy of 111 MeV.Charged particles,neutrons,and y-rays were emitted in this reaction and detected by the DIAMANT CsI ball,Neutron Wall,and the EXOGAM Ge clover array,respectively.In addition to the previously reported levels in 91Ru,new low-to-medium spin states were observed.Angular correlation and linear polarization measurements were performed to unambiguously determine spins and parities of the excited states in 91 Ru.The low-spin states of 91 Ru exhibit a scheme of multi-quasiparticle excitations,which is very similar to that of the neighboring N=47 isotone.These excitations have been interpreted in terms of the shell model.The calculations performed in the configuration space(p3/2,f5/2,p1/2,g9/2)reproduce the experimental excitation energies reasonably well,supporting the interpretation of the newly assigned positive-parity states in terms of the three quasiparticle configurationsπ(g9/2)^-2v(g9/2^-1 and v(g9/2)^-3.     

LC–MS bioanalysis of intact proteins and peptides

Bioanalysis assays that reliably quantify biotherapeutics and biomarkers in biological samples play pivotal roles in drug discovery and development. Liquid chromatography coupled with mass spectrometry (LC–MS), owing to its superior specificity, faster method development and multiplex capability, has evolved as one of the most important platforms for bioanalysis of biotherapeutics, particularly new scaffolds such as half-life extension platforms for proteins and peptides, as well as antibody drug conjugates. Intact LC–MS analysis is orthogonal to bottom-up surrogate peptide approach by providing whole molecule quantitation and high-level sequence and structure information. Here we review the latest development in LC–MS bioanalysis of intact proteins and peptides by summarizing recent publications and discussing the important topics such as the comparison between top-down intact analysis and bottom-up surrogate peptide approach, as well as simultaneous quantitation and catabolite identification. Key bioanalytical issues around intact protein bioanalysis such as sensitivity, data processing strategies, specificity, sample preparation and LC condition are elaborated. For peptides, topics including quantitation of intact peptide vs. digested surrogate peptide, metabolites, sensitivity, LC condition, assay performance, internal standard and sample preparation are discussed.     

Recent advances of organometallic complexes in emerging photovoltaics

Organometallic complexes (OMCs) consisting of organic and metal active moieties have shown immense potential for application in solar cells. The diverse structure, rich porosity, and unique charge centers of OMCs enable them to be functional in solar cells. In this review, we introduced four types of OMCs, such as crown organometallic complexes, β-diketone metal complexes, cyclometallic complexes, and main chain metal-containing polymers, providing an in-depth analysis of the structure-performance relationship. OMCs could serve as active or interlayer materials in a variety of solar cell systems such as organic solar cells, perovskite solar cells, and dye-sensitized solar cells, especially some metals to improve the photoelectric performance of the device as dopants. In the end, perspectives on the opportunities and challenges of OMCs are given.     

BioLeT: A new design strategy for functional bioluminogenic probes

By integrating photoinduced electron transfer (PET) into the design of functional bioluminogenic probes, Urano and his coworkers recently developed a new rational design strategy, BioLeT. It is expected that this BioLeT strategy will enable us to design and develop new bioluminescence probes for detecting various biomolecules with no catalytic or reactive activity.