光纤传感振动检测系统及其实验研究

实际工程结构中的振动检测是十分重要的，也是十分复杂的，常用的结构振动检测传感器易受工程现场恶劣环境的影响．而光纤传感器具有小巧、抗电磁干扰、灵敏度高、适合长期监测等优点。本文建立了基于马赫—曾德(Mech-Zehnder)干涉原理的光纤传感振动检测系统．研制了运用先进的数字信号处理技术采集和处理数据的专用软件，并在典型结构件——钢制悬臂梁结构上进行了外加信号作用下的强迫振动检测和冲击载荷作用下的自由衰减振动检测，测量了该结构件的频率及振幅，其结果与同时进行的成熟的电测结果相近，说明光纤传感器用于结构件的振动测量是可靠的。本文为光纤传感器应用于实际工程的振动检测提供了新的技术装置，具有工程应用前景。     

Measurements of Time-Varying Characteristics of Optical Signals and Inhomogeneities of Tested Substances with Additional Phase Modulation

The problem of investigation of the amplitude and phase structure of a time-varying probing optical signal and the structure of time-varying inhomogeneities of a substance tested by this signal is considered. The analysis is concerned, in particular, with determination of the structure of signals and processes with resolution in the pico- and femtosecond range. The scheme used for the analysis is based on registration of four spatially separated spectra of the studied radiation. The spectra are formed in a four-channel scheme with a twin-wave Michelson interferometer and a spectral device. Modulators based on electrooptical crystals (perovskites) are placed in the channels. The sum spectra are formed: without modulators, with the effect of either of the modulators, and with both of them affecting the radiation. The effect of the studied substance implies either modulating the radiation (in this case it is described by multiplication) or redistributing the radiation (then it is described by convolution).     

Design and performance analysis of beam steering birefringent mercurous chloride acousto-optic device

I.IntroductionThepcrformanccsofAcousto-optic(AO)dcviccareoftenlimitcdbythepropertiesofAOmcdiawhenitisusedinAOsigna1processingsystems.Thespectrumanalyzersandcorre1ationreceivers,forinstancc,areexpcctcdtoimprovcthereso1utionanddynamicrangcwhilereducingtheproccssorvolume.Rccent1y,ancwclassofmateria1s,themercurousha1ides,promiscstocontributeimportantsolutionstosuchnccdsandisrefincdtopractica1uti1izations.Themecurousha1ideweconsidcrinthispapcrismecurouschloride(Hg,C1,).Thesing1ecrystalofHg,Cl…     

Performance and simulation of an on-board guided-wave optical processor for airborne SAR applications

This paper describes the performance and simulation of a compact integrated optical processor for the real-time reconstruction of two-dimensional images in airborne stripmap synthetic aperture radar applications. The functional behavior of the processor is explained in some detail. The design criteria are briefly given. The simulation step allowed the main processor characteristics and properties to be identified. A number of comparisons were obtained in airborne SAR mission scenarios between the predictions of the optical device and those achieved by the modern electronic digital approach, based on the wavefront reconstruction method by matched filtering.     

Dynamics of Single-Pulse Echo Signals under the Conditions of Zeeman Switching

The signals of a single-pulse echo (SE) generated on nonresonant excitation of an inhomogeneously broadened two-level system by a radio-frequency pulse (RFP), against the background of which a magnetic video pulse (MVP) of certain length has been switched on, have been described analytically. It is established that under the conditions of such excitation several SE signals are formed whose generation moments are determined by the duration and amplitudes of the RFP and MVP. The amplitudes of some of these signals depend on the Rabi frequency according to a quadratic law, and the amplitudes of others depend on this frequency according to a biquadratic law. It has been established that the mechanism underlying the appearance of these signals is associated with zero beats arising as a result of superposition of the magnetization fluctuations at variable frequencies and at a frequency of detuning from resonance. It is shown that in the limiting case, where the RFP duration considerably exceeds the duration of the MVP or is comparable with it, the number of SE signals decreases to two. Theoretical results on the formation of SE and the dependence of the amplitude of these signals on the MVP amplitude agree with the experimental data on NMR pulsed signals in ferromagnetic materials.     

Asymmetry in the Multiprotein Systems of Molecular Biology

Signaling in living systems needs to achieve high specificity, to be reversible, and to achieve high signal to noise. Signaling mediated by multiprotein systems has evolved that avoids the requirement for high-affinity binary complexes that would be difficult to reverse and which, in the overcrowded cell, would lead to excessive noise in the system. Symmetrical structures are only occasionally formed. When they are, it is principally to colocate components, for example, the tyrosyl kinases of growth factors, where dimers form. Symmetry is, however, often broken, presumably to create more sensitivity and specificity in the signaling system by assembling other components, into higher-order multiprotein systems. The binding of a single heparin to two 1:1 FGF:FGFR complexes is an example, as is the binding of a single ligase to the Xrcc4 dimer, perhaps so creating a further DNA-binding site.     

基于小波包分析及支持向量机的超音速目标识别方法研究

提出了基于小波包分析及支持向量机的超音速目标识别方法 .通过 5 .5 6mm ,7.6 2mm和 12 .7mm三种枪弹试验获取信号 ,用小波包分解激波信号 ,统计每个频带的能量特征 ,用支持向量机方法训练测试样本 ,获得了很好的分类效果 .仿真结果表明基于超音速飞行体产生的激波信号来识别目标是可行的 .     

调制不稳定性对级联放大光纤传输系统信噪比的影响

在考虑光纤损耗和级联放大器的情况下，推导了调制不稳定性的产生条件和增益的普适解析表达式，分析了调制不稳定性对信噪比的影响，给出了一个新的计算信噪比的表达式。     

变参数波振器中小信号增益公式

利用微扰展开技术推导出变参数波振器的小信号增益两个近似求积表达式并将其计算结果与数值模拟结果进行了比较,二者吻合很好。利用近似解析式对小信号增益进行了初步探讨,得到了电子入射能量可低于初始谐振能,能散度允许范围受波振器设计影响以及降低锥度改变率可提高小信号增益等新结论。     

Frequency fine-tuning in Class IV flextensional transducers

Class IV flextensional transducers (FTs) are the best-known FTs in literature. These are light-weight projectors (compared to the conventional Tonpilz designs) with capability for high power delivery at low frequencies. The resonance frequencies of this type of transducers are known to be dominantly dependent on the characteristics of the outer shell than on the driver stack. Consequently, the method of achieving fine-tuning of the transducer by modifying the characteristics of the stack, as practiced in the case of Tonpilz designs, is not very effective. This paper describes a method for fine-tuning of the frequency of a Class IV FT, which involves only a modification of a pair of small components used for coupling the stack to the transducer. The effectiveness of the method is examined by finite element modelling using the package ATILA, in the case of a 3 kHz aluminium shell transducer. Experimental results are also presented.