基于LabVIEW的砝码自动检定系统设计与实现

针对目前砝码检定工作操作过程复杂、检定效率低等问题,设计了一种基于LabVIEW的砝码自动检定系统。在符合砝码检定规程的情况下,系统实现了检定数据实时采集、数据处理、生成原始记录、管理标准器、查询历史数据和衡器控制等功能。相对现有的砝码检定方法有操作简单、高效、程序移植性好等优点。系统由主控计算机、串口转无线扩展卡、多台衡器设备及相应的标准砝码装置组成。通过使用串口转Wi-Fi模块,系统可实现控制多台衡器设备的需求。实验结果证明,系统运行稳定可靠,采集数据准确,容易扩展,且大幅度减轻了检定人员的劳动强度,在计量检定工作中具有一定的实用和推广价值。     

双通道高速数据采集处理平台的设计与实现

为满足数字式测向接收机对高速数据采集和处理的需求,研制了高速数据采集处理平台,该平台基于ADC12D1800RF模数转换器实现了两路1.35GHz中频信号的带通采样,以Xilinx公司V7系列FPGA为数据处理器,采用高速DDR3作为存储设备解决了海量数据存储问题,并通过高速串行接口（GTX/SRIO）实现了大容量数据的实时传输。该平台的测试结果为：1.8GHz采样率时有效位数大于8bit,DDR3存储器的工作主频可达1333MHz,GTX接口在10Gbps速率下工作时,其误码率小于10-9,上述测试结果表明该平台可以高速、准确地实现信号采集、数据传输、存储和处理,达到了预期设计目标。     

Non-rigid landmark-based large-scale image registration in 3-D reconstruction of mouse and rat kidney nephrons

BackgroundSerial histological sections are suffering from mechanical distortions that disturb the reconstruction of 3-D objects. We have corrected such artifacts with a non-rigid landmark-based method that respects the original geometry in the tissue block. The method is exemplified on a large scale in the registration of semi-thin serial sections of the mouse and rat kidneys, and has been tested on FFPE-sections.AimIn this study of mouse and rat kidneys, we have measured and characterized the deformations introduced in the preparation of 2.5-μm-thick Epon sections and then eliminated them by a landmark-based non-rigid transformation (NRT).MethodsWe obtained 2.5-μm-thick serial Epon sections from three mouse kidneys and three rat kidneys for 3-D reconstruction of the nephron tubules. First, the images from 3000 serial mouse and 13,000 serial rat sections underwent a classic rigid registration (CRR), and the distortions were measured and indexed. The section images underwent a further NRT in order to compensate for the deformations. The NRT used is a classic interactive landmark-based approach. The quality of the NRT was verified by comparing the geometry of the transformed images with corresponding block images.ResultsAfter CRR, the 2.5-μm-thick sections had a linear deformation of up to 2%, the tubular lengths were overestimated with up to 1.5×, and it was most difficult to trace the tubules from section to section. After the additional NRT, the geometry of the images reflected the original geometry in the block, the tubular lengths were no longer overestimated, and the NRT highly facilitated the tracing of the tubular system.ConclusionsNRT has facilitated the tracing of the tubular system in kidneys, a tracing, which would otherwise have been most difficult to perform. NRT has yielded substantial new knowledge to segmental and spatial nephron organization in the mouse and rat kidneys.     

智能弹药的实时仿真可视化系统设计

针对仿真可视化系统开发时间长、开发费用高的问题,提出了一种利用Unity3D引擎进行实时仿真可视化系统开发的模块式设计方法。首先,对武器仿真可视化系统进行了分析,提出了智能弹药实时仿真可视化系统的五大模块;然后,通过在3ds Max下建立智能弹药模型和Unity3D下的二次开发,构建了智能弹药仿真可视化系统的仿真环境,以C#为编程工具,设计了仿真驱动、串口数据通讯和仿真输出模块;最终,实现了智能弹药实时仿真可视化系统。实验证明,该系统可以有效地在监视器上实时显示出智能弹药的飞行姿态、飞行参数和飞行轨迹。     

In vivo solid-phase microextraction for single rodent pharmacokinetics studies of carbamazepine and carbamazepine-10,11-epoxide in mice

The use of solid-phase microextraction (SPME) for in vivo sampling of drugs and metabolites in the bloodstream of freely moving animals eliminates the need for blood withdrawal in order to generate pharmacokinetics (PK) profiles in support of pharmaceutical drug discovery studies. In this study, SPME was applied for in vivo sampling in mice for the first time and enables the use of a single animal to construct the entire PK profile. In vivo SPME sampling procedure used commercial prototype single-use in vivo SPME probes with a biocompatible extractive coating and a polyurethane sampling interface designed to facilitate repeated sampling from the same animal. Pre-equilibrium in vivo SPME sampling, kinetic on-fibre standardization calibration and liquid chromatography–tandem mass spectrometry analysis (LC–MS/MS) were used to determine unbound and total circulating concentrations of carbamazepine (CBZ) and its active metabolite carbamazepine-10,11-epoxide (CBZEP) in mice (n = 7) after 2 mg/kg intravenous dosing. The method was linear in the range of 1–2000 ng/mL CBZ in whole blood with acceptable accuracy (93–97%) and precision (<17% RSD). The single dose PK results obtained using in vivo SPME sampling compare well to results obtained by serial automated blood sampling as well as by the more conventional method of terminal blood collection from multiple animals/time point. In vivo SPME offers the advantages of serial and repeated sampling from the same animal, speed, improved sample clean-up, decreased animal use and the ability to obtain both free and total drug concentrations from the same experiment.     

Minimal Modules Over Serial Rings

We investigate several model theoretic minimalities in the framework of modules over a given serial ring R.     

Pre-emption in resource-constrained project scheduling

The Resource-Constrained Project Scheduling Project (RCPSP), together with some of its extensions, has been widely studied. A fundamental assumption in this basic problem is that activities in progress are non-preemptable. Very little effort has been made to uncover the potential benefits of discrete activity pre-emption, and the papers dealing with this issue have reached the conclusion that it has little effect on project length when constant resource availability levels are defined. In this paper we show how three basic elements of many heuristics for the RCPSP – codification, serial SGS and double justification – can be adapted to deal with interruption. The paper is mainly focussed on problem 1_PRCPSP, a generalization of the RCPSP where a maximum of one interruption per activity is allowed. However, it is also shown how these three elements can be further adapted to deal with more general pre-emptive problems. Computational experiments on the standard j30 and j120 sets support the conclusion that pre-emption does help to decrease project length when compared to the no-interruption case. They also prove the usefulness of the justification in the presence of pre-emption. The justification is a RCPS technique that can be easily incorporated into a wide range of algorithms for the RCPSP, increasing their solution quality – maintaining the number of schedules calculated.     

基于组态软件和多串口通讯的真空检漏监测系统设计与开发

许 婕,蔡立君,卢 勇,罗 山,张 龙,田培红     

电极法-标准系列加入回收法测定污水中氨态氮

研究了在污水样中加入一系列铵标准溶液进行离子选择电极测定氨态氮的新方法,采用奈恩斯特新关系式进行回归运算。使样品和标准完全处于同一条件下测定,从而消除了污水中大量基体对测定影响,提高了方法的准确性。