低喷淋密度超亲水表面水平管降液膜温度分布

水平管降液膜蒸发广泛应用在石油、化工、海水淡化等领域,对低喷淋密度温度演化规律的研究有助于拓宽其应用范围,理解其微观机理。本文在超亲水表面上结合红外热追踪技术,对水平管降液膜表面的温度演化规律进行了研究,分析了温度分区现象和温升规律。实验中首次发现了马鞍形液膜内部的高温环状结构,并结合三维数值模拟揭示了掺混作用导致的局部高温环状结构形成的内部机理。     

地磁对γγ方向角关联测量的影响

在γ-γ角关联实验中,发现能谱中全能峰的位置随探头方位角的改变而变化。本文通过不同的实验,验证了地磁对能谱测量的干扰以及对γ-γ方向角关联测量的影响。发现地磁对测量的影响主要来自光电倍增管,地磁方向与光电倍增管中电子飞行方向的夹角的改变,引起光电倍增管增益变化,最终给γ-γ方向角关联测量带来较大的影响。文中总结了如何减小地磁影响,改进γ-γ方向角关联实验测量的方法。     

The pyrolysis of propane

The pyrolysis of propane plays an important role in determining the combustion properties of natural gas mixtures and offers insight into the cracking patterns of larger fuels. This work investigates propane pyrolysis behind reflected shock waves with a multiwavelength laser-absorption speciation technique. Nine laser wavelengths, sensitive to key pyrolysis species, were used to measure absorbance time histories during the decomposition of 2% propane in argon between 1022 and 1467 K, 3.7-4.3 atm. Absorbance models were developed at each diagnostic wavelength to interrogate common initial conditions, and time histories of all major species are reported at 1250, 1290, 1330, 1370, and 1410 K. Nearly complete carbon recovery observed at lower temperatures enabled the inference of hydrogen formation from atomic conservation, while decaying carbon recovery at high temperatures suggests the formation of allene and 1-butene. The results show systematically faster pyrolysis than predicted by kinetic modeling and motivate further study into the kinetics of propane pyrolysis.     

Ignition delay times of methane and hydrogen highly diluted in carbon dioxide at high pressures up to 300 atm

The need for more efficient power cycles has attracted interest in super-critical CO₂ (sCO₂) cycles. However, the effects of high CO₂ dilution on auto-ignition at extremely high pressures has not been studied in depth. As part of the effort to understand oxy-fuel combustion with massive CO₂ dilution, we have measured shock tube ignition delay times (IDT) for methane/O₂/CO₂ mixtures and hydrogen/O₂/CO₂ mixtures using sidewall pressure and OH* emission near 306?nm. Ignition delay time was measured in two different facilities behind reflected shock waves over a range of temperatures, 1045–1578?K, in different pressures and mixture regimes, i.e., CH₄/O₂/CO₂ mixtures at 27–286 atm and H₂/O₂/CO₂ mixtures at 37–311 atm. The measured data were compared with the predictions of two recent kinetics models. Fair agreement was found between model and experiment over most of the operating conditions studied. For those conditions where kinetic models fail, the current ignition delay time measurements provide useful target data for development and validation of the mechanisms.     

Ultra-Small-Bandgap Conjugated Polymers Based on an N−B←N Unit

Since the breakthrough of conductive polymers in 1977, scientists have made great efforts to create small band gap (E_g) conjugated polymers. Two general strategies to design small E_g conjugated polymers are quinoid structure and donor-acceptor structure. Ultrasmall E_g conjugated polymers (E_g<1.0 eV) always suffer from poor air stability because of high-lying HOMO energy levels. In this work, we report a new strategy to design ultrasmall E_g conjugated polymers by N−B←N unit, i.e. balanced resonant boron-nitrogen covalent bond (B−N) and boron-nitrogen coordination bond (B←N). The resulting polymer exhibits an E_g of 0.82 eV and an onset absorption wavelength of >1500 nm. Moreover, the polymer exhibits excellent air stability because of its low-lying LUMO/HOMO energy levels. An unprecedented property of this polymer is the selective light absorption in the infrared range (800–1500 nm) and high transparency in the visible range (400–780 nm). Using this property, for the first time, we demonstrate the application of conjugated polymers as transparent thermal-shielding coating layer on glass, which reduces indoor solar irradiation through window and consequently reduces power consumption for cooling of buildings and cars in summer.     

Analytical devices based on light-emitting diodes – a review of the state-of-the-art

A general overview of the development of the uses of light-emitting diodes in analytical instrumentation is given. Fundamental aspects of light-emitting diodes, as far as relevant for this usage, are covered in the first part. The measurement of light intensity is also discussed, as this is an essential part of any device based on light-emitting diodes as well. In the second part, applications are discussed, which cover liquid and gas-phase absorbance measurements, flow-through detectors for chromatography and capillary electrophoresis, sensors, as well as some less often reported methods such as photoacoustic spectroscopy.     

Heat transfer from a vertical tube bundle under natural circulation conditions

A rectangular loop (thermosyphon) was used to measure the average heat transfer coefficients for water at atmospheric pressure under natural circulation conditions. A twenty-one tube bundle with tubes 1.65 m long and 9.55 mm in diameter, and a pitch-to-diameter ratio of 1.33, was used as a test heat exchanger in one of the vertical legs of the loop. A natural circulation flow in the loop developed due to buoyancy differences of the fluid in its two vertical legs. Flow visualization experiments were performed to determine the flow regimes associated with natural circulation flow longitudinal to a tube bundle. Empirical correlations for the average Nusselt number have been developed and are reported. Grid spacers arranged on tube bundles were shown to enhance heat transfer, especially for laminar flow, without any noticeable increase in pressure drop.     

Heat transfer in bubble layers at high pressures

An original experimental investigation of heat transfer with steam condensation on a surface of a horizontal cooled tube immersed in a bubbling layer was carried out. A copper test section 16 mm in diameter and 285 mm in length was placed in a bubbling column 295 mm in diameter. Experiments were made under a pressure of 0.72-3.8 MPa with volume steam content 0-0.18, steam superficial velocities 0-0.18 m/s, and liquid-wall temperature difference 38–106 K. The heat transfer process in a bubbling layer under high pressures is shown to be of considerably intensity; with moderate values of steam content heat transfer coefficients reach 10–12 kW/(m²·K). The use of the known correlations assumed for the case of air bubbling under atmospheric pressure results in systematically underestimating heat transfer by 30–80%. Data were obtained on heat transfer with film condensation of steam and natural convection of subcooled water at high temperature differences outside the range investigated earlier. Experimental data table is appended.     

双驱动激波管稀疏波破膜技术研究

本文介绍了在双驱动激波管中运用稀疏波破膜的技术。在以压缩空气和氮气作实验气体的情形下,实验研究了中间段长度、稀疏波强度及中间段B膜的破膜压力（压差）对第二激波追韩第一激波的影响。实验结果表明：中间段的长短,显著地制约着前后两道激波的间隔;稀疏波强度及中间段B膜的破膜压力对稀疏波破膜时间及第二激小对反射稀疏波的追赶有重要影响。     

一种新的运动激波--非定常边界层相互干扰现象

本文探讨了一种新的激波－非定常边界层相互干扰现象，这种激波－边界层干扰现象既不同于定常激波－边界层干扰现象，又不同于激波在端面反射后与该激波所诱导的边界层之间的干扰现象，而是运动激波与稀疏波和第一激波所诱导的非这常边界层之间的干扰现象，本文对这种现象用微波动力学理论进行分析，并把这种干扰现象看成激波的绕射现象，同时在稀疏波破膜的双驱动激波管中进行实验观察，最后把理论分析与实验观察进行了比较。