A rapid,spatially dispersive frequency comb spectrograph aimed at gas phase chemical reaction kinetics

This New Views article will highlight some recent advances in high sensitivity gas detection using direct infrared absorption frequency comb laser spectroscopy, with a focus on frequency comb use in chemical reaction kinetics and our own contribution to this field. Our recently implemented detection technique uses a combination of a 12.9?GHz free spectral range virtually imaged phased array and diffraction grating to spatially disperse the mid-infrared frequency comb onto a camera. Individual frequencies or ‘comb teeth’ of a 250?MHz repetition-rate frequency comb are able to be resolved. High molecular sensitivity is achieved by increasing the interaction path length using a Herriott multipass cell. High spectral resolution, broadband spectral coverage, and high molecular sensitivity are all achieved on an adjustable 1–50 µs timescale, making this frequency comb apparatus ideal for measuring chemical reaction kinetics where multiple absorbing species can be monitored simultaneously. This New Views article will also discuss some of the challenges and decisions that chemists might face in implementing this advanced physics technology in their own laboratory.

Spatially dispersed 250 MHz mid-infrared frequency comb laser, with absorption of some frequencies by a dilute sample of methane.     

Capturing the experimental behaviour of a point-absorber WEC by simplified numerical models

The paper presents a wave basin experiment of a direct-driven point-absorber wave energy converter moving in six degrees of freedom. The goal of the work is to study the dynamics and energy absorption of the wave energy converter, and to verify under which conditions numerical models restricted to heave can capture the behaviour of a point-absorber moving in six degrees of freedom. Several regular and irregular long-crested waves and different damping values of the power take-off system have been tested. We collected data in terms of power output, device motion in six degrees of freedom and wave elevation at different points of the wave basin. A single-body numerical model in the frequency domain and a two-body model in the time domain are used in the study. Motion instabilities due to parametric resonance observed during the experiments are discussed and analysis of the buoy motion in terms of the Mathieu instability is also presented. Our results show that the simplified models can reproduce the body dynamics of the studied converter as long as the transverse non-linear instabilities are not excited, which typically is the case in irregular waves. The performance of the more complex time domain model is able to reproduce both the buoy and PTO dynamics, while the simpler frequency domain model can only reproduce the PTO dynamics for specific cases. Finally, we show that the two-body dynamics of the studied wave energy converter affects the power absorption significantly, and that common assumptions in the numerical models, such as stiff mooring line or that the float moves only in heave, may lead to incorrect predictions for certain sea states.     

Resonances in bounded media: Nonlinear and boundary effects

We study the response of nonlinear wave systems in bounded domains at or near resonance. There are typically two qualitatively distinct types of response which may be observed relating to whether or not higher harmonics are themselves resonant. We introduce a variety of nonlinear model problems at or near resonance and study the subsequent response. We explain how the features of this problem such as the form of nonlinearity, boundary conditions, and the nature of spectrum play a fundamental role in the qualitative nature of the response. Numerical simulations are carried out to provide further explanation and comparison with analytic approximations. The results of this study provide a better understanding of the impact and interplay between nonlinear and boundary effects and thus in turn will contribute to providing new insights into various physically motivated problems in acoustics and other settings.     

The FDTD simulation for the performance of dispersive cloak devices

In this paper, we defined the scattering energy intensity based on the Poynting vector to quantitatively study the cloak effect of electromagnetic waves in the time domain. The influences of the effective working frequency bands of four kinds of electromagnetic cloak materials, incidence angle of electromagnetic waves and the number of approximately cloak layers on the cloak effect are studied. To the best of our knowledge, this is the first time to use the time domain method to quantitatively study the effective working frequency band and the scattering energy intensity of cloak materials.     

Direct calculation of time varying Aharonov-Bohm effect

The Aharonov-Bohm effect (ABE) for steady magnetic fields is a well known phenomenon. However, if the current in the infinite solenoid that creates the magnetic field is time-dependent, that is in the presence of both magnetic and electric fields, there is no agreement whether the effect would be present. In this note, we try to investigate time varying ABE by a direct calculation in a set-up with a weak time dependent magnetic field. We find that the electric field arising out of the time-varying magnetic field in the path of the electrons does not enter the action integral but only changes the path of the electron from the source to the slits and then on to the detector. We find a frequency dependent AB phase shift. At low frequencies the result smoothly approaches the one for a constant field as the frequency tends towards zero. On the other hand, for high frequencies such that the AB-phase induced in the path of the wave packet oscillates rapidly, the net effect will be very small which is borne out by our results.     

Existence,nonexistence and multiplicity results for nonlocal Dirichlet problems

In this paper we establish various existence, nonexistence and multiplicity results for fully nonlinear Dirichlet problems associated to nonlocal Hamilton–Jacobi equations. This study is accomplished by a careful analysis of the principal eigenvalues of the elliptic operator. Resonance phenomena and anti maximum principles are also established.     

A secure communication scheme based on chaotic Duffing oscillators and frequency estimation for the transmission of binary-coded messages

This work presents a new technique to securely transmit and retrieve a message signal via chaotic systems. The main contribution of this paper is two-fold: the way that the message signal is encrypted in the frequency of a sinusoidal term and a novel frequency estimator for retrieving the message. In our system, a two-valued message signal modulates the frequency of the Duffing oscillator sinusoidal term. Then, two chaotic signals generated by the oscillator are encrypted with a Delta modulator and sent through a noisy channel. A Lyapunov-based observer is used in the receiver side to retrieve the sinusoidal term that contains the message and a novel frequency estimator is then used to retrieve the confidential message signal. The system was implemented in Matlab/Simulink in order to analyze its performance.     

Tuning the properties of a black TiO2-Ag visible light photocatalyst produced by a rapid one-pot chemical reduction

A highly efficient black TiO₂-Ag photocatalytic nanocomposite, active under both UV and visible light illumination, was synthesized by decorating the surface of 25 nm TiO₂ particles with Ag nanoparticles. The material was obtained via a rapid, one-pot, simple (surfactant and complexing agent free) chemical reduction method using silver nitrate and formaldehyde as a metal salt and reducing agent, respectively. The nanocomposite shows an increase of over 800% in the rate of photocatalytic methylene blue dye degradation, compared to commercial unmodified TiO_2, under UV-VIS illumination. Unlike pure TiO₂, the nanocomposite exhibits visible light activation, with a corresponding drop in optical reflectance from 100% to less than 10%. The photocatalytic properties were shown to be strongly enhanced by post-reduction annealing heat treatments in air, which were observed to decrease, rather than coarsen, silver particle size, and increase particle distribution. This, accompanied by a variation in the silver surface oxidation states, appear to dramatically affect the photocatalytic efficiency under both UV and visible light. This highly active photocatalyst could have wide ranging applications in water and air pollution remediation and solar fuel production.     

Multi-Resonance Building-Block-Based Electroluminescent Material: Lengthening Emission Maximum and Shortening Delayed Fluorescence Lifetime

Multi-resonance thermally activated delayed fluorescence (MR-TADF) materials are considered a class of organic materials with exceptional electronic and optical properties, which make them promising for the applications in organic light-emitting diodes (OLEDs). In this study, we improved, synthesized, and characterized a multiple-resonance type emitter based on the assembly of MR-building blocks (MR-BBs). By optimizing the geometric arrangement of MR-BBs, we were able to generate narrowband emission in the longer wavelength region and shorten the delayed excited-state lifetime, resulting in improved emission efficiency compared to the parent molecule. Our proof-of-concept molecule, m-DBCz, exhibited narrowband yellowish-green TADF emission with a full width at half-maximum of 32 nm and a small singlet-triplet energy gap of 0.04 eV. The OLED developed using m-DBCz as the emitter demonstrated electroluminescence at 548 nm and achieved a high external quantum efficiency (EQE) of 34.9 %. Further optimization of the device resulted in a high external quantum efficiency of 36.3 % and extremely low efficiency roll-off, with EQE values of 30.1 % and 27.7 % obtained even at high luminance levels of 50 000 and 100 000 cd m⁻². These results demonstrate the full potential of MR-TADF materials for applications on ultrahigh-luminance OLEDs.