Transient transition behaviors of fractional-order simplest chaotic circuit with bi-stable locally-active memristor and its ARM-based implementation

This paper proposes a fractional-order simplest chaotic system using a bi-stable locally-active memristor. The characteristics of the memristor and transient transition behaviors of the proposed system are analyzed, and this circuit is implemented digitally using ARM-based MCU. Firstly, the mathematical model of the memristor is designed, which is nonvolatile, locally-active and bi-stable. Secondly, the asymptotical stability of the fractional-order memristive chaotic system is investigated and some sufficient conditions of the stability are obtained. Thirdly, complex dynamics of the novel system are analyzed using phase diagram, Lyapunov exponential spectrum, bifurcation diagram, basin of attractor, and coexisting bifurcation, coexisting attractors are observed. All of these results indicate that this simple system contains the abundant dynamic characteristics. Moreover, transient transition behaviors of the system are analyzed, and it is found that the behaviors of transient chaotic and transient period transition alternately occur. Finally, the hardware implementation of the fractional-order bi-stable locally-active memristive chaotic system using ARM-based STM32F750 is carried out to verify the numerical simulation results.     

人教版高中化学教科书“研究与实践”栏目分析与实施策略*

对人教版高中化学教科书新设计的“研究与实践”栏目的主题内容、功能价值进行分析,就如何充分发挥该栏目的教学功能和价值,发展学生的化学学科核心素养,提出了创设教学情境线索、开发为研究性学习课题、开发为校本选修课程、开发为STEM课程等实施策略。     

The development of an artificial organic networks toolkit for LabVIEW

Two of the most challenging problems that scientists and researchers face when they want to experiment with new cutting‐edge algorithms are the time‐consuming for encoding and the difficulties for linking them with other technologies and devices. In that sense, this article introduces the artificial organic networks toolkit for LabVIEW? (AON‐TL) from the implementation point of view. The toolkit is based on the framework provided by the artificial organic networks technique, giving it the potential to add new algorithms in the future based on this technique. Moreover, the toolkit inherits both the rapid prototyping and the easy‐to‐use characteristics of the LabVIEW? software (e.g., graphical programming, transparent usage of other softwares and devices, built‐in programming event‐driven for user interfaces), to make it simple for the end‐user. In fact, the article describes the global architecture of the toolkit, with particular emphasis in the software implementation of the so‐called artificial hydrocarbon networks algorithm. Lastly, the article includes two case studies for engineering purposes (i.e., sensor characterization) and chemistry applications (i.e., blood–brain barrier partitioning data model) to show the usage of the toolkit and the potential scalability of the artificial organic networks technique. © 2015 Wiley Periodicals, Inc.     

初中化学“酸和碱的性质”创意教学*——探析食品发热包

以食品发热包为主题情境,通过探析发热包成分、解密发热原理、计算原料配比、配制发热包等环节梳理酸和碱的性质、用途。从元素观、转化观的视角认识物质转化规律,体现物质研究的一般思路,凸显科学探究的基本过程。通过设计方案测定发热包中碳酸钠的含量,总结混合物成分鉴定及定量测定的方法;归纳气体定量测定的影响因素。呈现一堂学科观念、学科方法教学具体课例,凸显物质研究、定性检验、定量测定的基本方法。     

回归知识本原 构建生命课堂——以“常见物质的检验”为例

以“常见物质的检验”的教学为例,运用化学史料帮助学生自主建构知识体系,促进学生追寻知识本原,实现思维进阶,发展核心素养,并阐述运用化学史料构建高中化学生命课堂的实施策略。     

A matrix-free high-order discontinuous Galerkin compressible Navier-Stokes solver: A performance comparison of compressible and incompressible formulations for turbulent incompressible flows

Both compressible and incompressible Navier-Stokes solvers can be used and are used to solve incompressible turbulent flow problems. In the compressible case, the Mach number is then considered as a solver parameter that is set to a small value, M ≈0.1, in order to mimic incompressible flows. This strategy is widely used for high-order discontinuous Galerkin (DG) discretizations of the compressible Navier-Stokes equations. The present work raises the question regarding the computational efficiency of compressible DG solvers as compared to an incompressible formulation. Our contributions to the state of the art are twofold: Firstly, we present a high-performance DG solver for the compressible Navier-Stokes equations based on a highly efficient matrix-free implementation that targets modern cache-based multicore architectures with Flop/Byte ratios significantly larger than 1. The performance results presented in this work focus on the node-level performance, and our results suggest that there is great potential for further performance improvements for current state-of-the-art DG implementations of the compressible Navier-Stokes equations. Secondly, this compressible Navier-Stokes solver is put into perspective by comparing it to an incompressible DG solver that uses the same matrix-free implementation. We discuss algorithmic differences between both solution strategies and present an in-depth numerical investigation of the performance. The considered benchmark test cases are the three-dimensional Taylor-Green vortex problem as a representative of transitional flows and the turbulent channel flow problem as a representative of wall-bounded turbulent flows. The results indicate a clear performance advantage of the incompressible formulation over the compressible one.     

New practical tools for the implementation and use of ultrafast 2D NMR experiments

Ultrafast (UF) 2D NMR is a very promising methodology enabling the acquisition of 2D spectra in a single scan. In the last few years, the analytical performance of UF 2D NMR has been highly increased, consequently maximizing its range of applications. However, its implementation and use by non‐specialists are far from being straightforward, because of the specific acquisition and processing procedures and parameters characterizing UF NMR. To make this methodology implementable and applicable by non‐specialists, we developed a simple routine capable of translating conventional parameters (spectral widths and transmitter frequencies) into specific UF parameters (gradient and chirp pulse parameters). This macro was subsequently implemented in a Web page, which is available for external users. Although the algorithm was designed for two widely used 2D experiments, COSY and HSQC, it can easily be extended to any other pulse sequence. The robustness of this routine was verified successfully on a variety of small molecules. We believe that this tool will eliminate much of the technical difficulties related to UF 2D NMR and will make the technique accessible to a wider audience of organic and analytical chemists. Copyright © 2013 John Wiley & Sons, Ltd.     

A novel hyperchaotic system and its circuit implementation

A four-dimensional hyperchaotic system with five parameters is proposed. Its dynamical properties such as dissipativity, equilibrium points, Lyapunov exponent, Lyapunov dimension, bifurcation diagrams and Poincare maps are analyzed theoretically and numerically. Theoretical analyses and simulation tests indicate that the new system's dynamics behavior can be periodic attractor, chaotic attractor and hyperchaotic attractor as the parameter varies. Finally, the circuit of this new hyperchaotic system is designed and realized by Multisim software. The simulation results confirm that the chaotic system is different from the existing chaotic systems and is a novel hyperchaotic system. The system is recommendable for many engineering applications such as information processing, cryptology, secure communications, etc.     

基于UML技术的空间基础数据库设计与实现

设计合理的空间基础数据库不仅能提高整个空间数据操作时的性能和效率,而且还可以减少后期的维护修复工作,使整个空间基础数据运行的更加快捷,需要对空间基础数据建立数据库。当前的空间基础数据库设计方法采用ArcSDE数据引擎对空间基础数据进行不断地更新调整,再利用多源空间数据格式转换的技术对空间基础数据库进行设计,存在空间基础数据运行时速度缓慢,计算精度低的问题。为此,提出了一种基于UML技术的空间基础数据库设计方法。该方法首先在空间基础数据库设计中建立空间基础数据索引结构,利用R-树族构建空间基础数据索引树,依据空间基础数据索引树,扫描索引空间基础数据,过滤掉不满足查询条件的空间基础数据对象,使空间数据查询结果可以在额定时间内获得,然后采用空间基础数据点、数据线、以及由数据线组成的区域、一组区域、空间基础数据网络的详细存储方式对空间基础数据进行存储,利用MongoDB驱动程序对矢量空间数据进行存储存储,最后通过对空间基础数据库索引、查询、存储等设计实现了空间基础数据库的建立。仿真实验结果证明,所提方法提高了空间基础数据的建库速度,减少了数据运行的时间,提升了空间基础数据的利用率。     

LCC谐振变换器的优化设计与实现

LCC谐振变换器是电除尘高频高压电源的核心器件,十分适用于高压大功率场合,针对连续模式应用于电除尘高频高压电源的不足,采用LCC谐振变换器断续模式进行优化设计。分析了带RC负载的LCC谐振变换器断续模式(简称DCM)的工作原理及拓扑结构,采用状态空间法推导了其数学模型,研究并建立了新颖的LCC谐振变换器断续模式下的损耗模型。在此基础上提出了一种基于遗传粒子群算法的LCC谐振变换器优化设计方法,该方法直观并且准确,实现了软开关技术,提高了电源的工作效率。并在现场通过一台72KV/85KW的电除尘高频高压电源样机验证了本文的正确性。