Characterization of new Pt(IV)–thiazole complexes: Analytical,spectral, molecular modeling and molecular docking studies and applications in two opposing pathways

New thiazole derivatives were synthesized and fully characterized, then coordinated with PtCl₄ salt. Also, the newly synthesized Pt(IV) complexes were investigated analytically (elemental and thermogravimetric analyses), spectrally (infrared, UV–visible, mass, ¹H NMR, ¹³C NMR, X‐ray diffraction) as well as theoretically (kinetics, modeling and docking). The data extracted led to the establishment of the best chemical and structural forms. Octahedral geometry was the only formula proposed for all complexes, which is favorable for d⁶ systems. The molecular ion peaks from mass spectral analysis coincide with all analytical data, confirming the molecular formula proposed. X‐ray diffraction (XRD) and scanning electron microscopy (SEM) allowed discrimination of features between crystalline particles and other amorphous morphology. By applying Gaussian09 as well as HyperChem 8.2 programs, the best structural forms were obtained, as well as computed significant parameters. Computed parameters such as softness, hardness, surface area and reactivity led us towards application in two opposing pathways: tumor inhibition and oxidation activation. The catalytic oxidation for CO was conducted over PtO₂, which was yielded from calcination of the most reactive complex. The success of catalytic role for synthesized PtO₂ was due to its particulate size and surface morphology, which were estimated from XRD patterns and SEM images, respectively. The antitumor activity was tested versus HCT‐116 and HepG‐2 cell lines. Mild toxicity was recorded for two of the derivatives and their corresponding complexes. This degree of toxicity is more favorable in most cases, due to exclusion of serious side effects, which is coherently attached with known antitumor drugs.     

Crystal structure of K[PtCl3(caffeine)] and its interactions with important nitrogen-donor ligands

The crystal structure of K[PtCl₃(caffeine)] was determined. The coordination geometry around platinum is square-planar formed by N9 of the caffeine ligand and three Cl^? ions. The bond lengths and angles of K[PtCl₃(caffeine)] were compared with those reported for [PtCl₃(caffeine)]^? and K[PtCl₃(theobromine)]. At the level of the statistical significance of the data we have compared, no differences in the bond distances and angles for any of these compounds were noticed. Weak interactions between K⁺ and Cl^? are responsible for the formation of 1-D polymeric chains in the crystal structure of the complex. The interactions of K[PtCl₃(caffeine)] with inosine (Ino) and guanosine-5′-monophosphate (5′-GMP) were studied by ¹H NMR spectroscopy at 295 K in D₂O in a molar ratio of 1 : 1. The results indicate formation of the reaction product [PtCl₃(Nu)] (Nu=Ino or 5′-GMP) with the release of caffeine from the coordination sphere of the starting complex. The higher stability of the bond between the Pt(II) ion and Ino or 5′-GMP compared to the stability of the platinum–caffeine bond is confirmed by density functional theory calculations (B3LYP/LANL2DZp) using as models 9-methylhypoxanthine and 9-methylguanine.     

Prediction of 195Pt NMR chemical shifts of dissolution products of H2[Pt(OH)6] in nitric acid solutions by DFT methods: how important are the counter‐ion effects?

¹⁹⁵Pt NMR chemical shifts of octahedral Pt(IV) complexes with general formula [Pt(NO₃)_n(OH)_{6 ? n}]^2?, [Pt(NO₃)_n(OH₂)_{6 ? n}]^{4 ? n} (n = 1–6), and [Pt(NO₃)_{6 ? n ? m}(OH)_m(OH₂)_n]^{?2 + n ? m} formed by dissolution of platinic acid, H₂[Pt(OH)₆], in aqueous nitric acid solutions are calculated employing density functional theory methods. Particularly, the gauge‐including atomic orbitals (GIAO)‐PBE0/segmented all‐electron relativistically contracted–zeroth‐order regular approximation (SARC–ZORA)(Pt) ∪ 6–31G(d,p)(E)/Polarizable Continuum Model computational protocol performs the best. Excellent second‐order polynomial plots of δ_calcd(¹⁹⁵Pt) versus δ_exptl(¹⁹⁵Pt) chemical shifts and δ_calcd(¹⁹⁵Pt) versus the natural atomic charge Q_Pt are obtained. Despite of neglecting relativistic and spin orbit effects the good agreement of the calculated δ ¹⁹⁵Pt chemical shifts with experimental values is probably because of the fact that the contribution of relativistic and spin orbit effects to computed σ^{iso 195}Pt magnetic shielding of Pt(IV) coordination compounds is effectively cancelled in the computed δ ¹⁹⁵Pt chemical shifts, because the relativistic corrections are expected to be similar in the complexes and the proper reference standard used. To probe the counter‐ion effects on the ¹⁹⁵Pt NMR chemical shifts of the anionic [Pt(NO₃)_n(OH)_{6 ? n}]^2? and cationic [Pt(NO₃)_n(OH₂)_{6 ? n}]^{4 ? n} (n = 0–3) complexes we calculated the ¹⁹⁵Pt NMR chemical shifts of the neutral (PyH)₂[Pt(NO₃)_n(OH)_{6 ? n}] (n = 1–6; PyH = pyridinium cation, C₅H₅NH⁺) and [Pt(NO₃)_n(H₂O)_{6 ? n}](NO₃)_{4 ? n} (n = 0–3) complexes. Counter‐anion effects are very important for the accurate prediction of the ¹⁹⁵Pt NMR chemical shifts of the cationic [Pt(NO₃)_n(OH₂)_{6 ? n}]^{4 ? n} complexes, while counter‐cation effects are less important for the anionic [Pt(NO₃)_n(OH)_{6 ? n}]^2? complexes. The simple computational protocol is easily implemented even by synthetic chemists in platinum coordination chemistry that dispose limited software availability, or locally existing routines and knowhow. Copyright © 2016 John Wiley & Sons, Ltd.     

Effects of intramolecular hydrogen bonds on phosphorescence emission: A theoretical perspective

Importing intramolecular hydrogen bond in phosphorescent transition metal complexes has been considered one of the excellent approaches to improve the electroluminescence performance of organic light-emitting diodes in real applications. However, the relationships between such H-bond structure and phosphorescent properties have not been theoretically revealed yet. In this study, two types of intramolecular hydrogen bonds are introduced into the two classes of traditional materials, that is, Pt(II) and Ir(III) complexes ( 1a and 2a ) to completely elucidate their influence on the structures and properties by comparing with the original phosphors ( 1b and 2b ) using density functional theory/time-dependent density functional theory for the first time. A comprehensive analysis of the geometric structures, molecular orbitals, and luminescence properties (including phosphorescence emission wavelengths and radiative and nonradiative decay processes) has been carried out. Our theoretical model highlights that complexes 1a and 2a embedded with H-bonds significantly promote the phosphorescence emission band blue-shifted and restrict molecular deformations compared with the corresponding 1b and 2b , which can provide helpful guidance to regulate and design several aspects of highly efficient blue phosphorescent emitters.     

不同聚合物分散剂对Pt/SAPO-11催化剂性能的影响

采用浸渍法制备了经过不同聚合物分散剂处理的Pt/SAPO-11催化剂,并通过X射线衍射(XRD)、透射电子显微镜(TEM)、N₂吸附-脱附和NH₃程序升温脱附(TPD)等对催化剂的组织结构进行了表征。结果表明,分散剂不会破坏催化剂的结构,反而提高了其孔体积、孔径和比表面积,同时改变了沸石的酸强度和酸量,其中以聚乙烯吡咯烷酮处理的Pt/SAPO-11催化剂孔体积、孔径和酸性分布最佳。在固定床反应器上对不同分散剂处理的Pt/SAPO-11催化剂催化性能进行评价,结果表明聚乙烯吡咯烷酮处理的Pt/SAPO-11催化剂也表现出最佳的催化性能,麻风树油的加氢脱氧率高达99.45%,生物航空煤油组分收率和异构烷烃组分(C₈~C₁₆)的选择性分别达到了44.67%和56.37%。     

Steering the Selectivity of Electrocatalytic Glucose Oxidation by the Pt Oxidation State

Electrocatalytic glucose oxidation can produce high value chemicals, but selectivity needs to be improved. Here we elucidate the role of the Pt oxidation state on the activity and selectivity of electrocatalytic oxidation of glucose with a new analytical approach, using high-pressure liquid chromatography and high-pressure anion exchange chromatography. It was found that the type of oxidation, i.e. dehydrogenation of primary and secondary alcohol groups or oxygen transfer to aldehyde groups, strongly depends on the Pt oxidation state. Pt⁰ has a 7-fold higher activity for dehydrogenation reactions than for oxidation reactions, while PtO_x is equally active for both reactions. Thus, Pt⁰ promotes glucose dialdehyde formation, while PtO_x favors gluconate formation. The successive dehydrogenation of gluconate is achieved selectively at the primary alcohol group by Pt⁰, while PtO_x also promotes the dehydrogenation of secondary alcohol groups, resulting in more complex reaction mixtures.     

Front Cover: Synthesis,Characterization, and Cytotoxicity of a Reactive Platinum(IV) Monotrifluoromethyl Complex (Eur. J. Inorg. Chem. 3/2023)

Platinum-based complexes are among the most widely utilized cancer therapeutics. Current Pt(II) drugs face some challenges including toxicity and drug resistance. To solve these issues, great efforts have been devoted to developing nonclassical platinum complexes, such as Pt(IV) prodrugs, that act via mechanisms distinct from those of the approved drugs. Compared with active Pt(II) counterparts, Pt(IV) complexes are relatively inert. Although direct interactions between Pt(IV) complexes and nucleotides have been reported, the reaction is slow due to the kinetic inertness of Pt(IV) complexes. Herein, we design and synthesize a Pt(IV) monotrifluoromethyl complex, in which the chloride ligand that is trans to trifluoromethyl ligand is reactive. The Pt(IV) monotrifluoromethyl complex is very stable in water but displays high reactivity towards various substrates including buffer components and 5’-dGMP. The study of reaction mechanism reveals that this Pt(IV) complex reacts with phosphate via S_N2 nucleophilic substitution pathway, which is different from Pt(II) drugs. The Pt(IV) monotrifluoromethyl complex is cytotoxic in human ovarian cancer cells. Our work reports an example of a reactive organometallic Pt(IV) complex that can directly interact with nucleophiles and implies its potential as an anticancer agent.     

Pt/MIL-101(Cr)在肉桂醛选择性加氢反应中的催化性能

采用简单易行的浸渍法将Pt纳米粒子负载到MIL-101(Cr)上,制备了Pt/MIL-101(Cr)催化剂,并对其在肉桂醛选择性加氢反应的催化性能进行了研究。XRD、N₂吸附、TEM和催化性能的研究结果表明,Pt的负载量对负载于MIL-101(Cr)上Pt纳米粒子的尺寸及所制备催化剂对肉桂醇的选择性有很大影响。低Pt负载量(1.0%)的Pt/MIL-101(Cr)较其他MOFs和无机材料在肉桂醛选择性加氢反应中表现出了高的催化性能,在优化的反应条件下肉桂醛转化率和对肉桂醇的选择性可分别达96.5%和86.2%。Pt/MIL-101(Cr)催化剂具有良好的稳定性。Pt/MIL-101(Cr)所表现出的优良的催化性能同MIL-101(Cr)载体的孔道结构及其表面性质密切相关。     

Trace analysis of Pt (IV) metal ions in roadside soil and water samples by Fe3O4/graphene/polypyrrole nanocomposite as a solid-phase extraction sorbent followed by atomic absorption spectrometry

A novel Fe₃O₄/graphene/polypyrrole nanocomposite has been successfully synthesised via a simple chemical method and applied as a new magnetic solid-phase extraction (MSPE) sorbent for the separation and pre-concentration of trace amounts of Pt (IV) in environmental samples followed by flame atomic absorption spectrometric (FAAS) detection. The nanocomposite has been characterised by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and Fourier transform infrared (FTIR) spectroscopy. Seven important parameters, affecting the extraction efficiency of Pt (IV), including pH, adsorption time, desorption solvent type and concentration, desorption time, elution volume and sample volume, were investigated. Under the optimised conditions, the calibration graph was linear in the range of 50–1500 μg L^?1 (R = 0.993). The detection limit and pre-concentration factor (PF) for Pt (IV) were found to be 16 μg L^?1 and 112.5, respectively. Under the optimised solid-phase extraction (SPE) conditions, the adsorption isotherm and the adsorption capacity of the nanocomposite for Pt (IV) were studied. Pt (IV) adsorption equilibrium data were fitted well to the Langmuir isotherm and the maximum adsorption capacity of the magnetic sorbent was calculated from the Langmuir isotherm model as 416.7 mg g^?1. The precision of the method was studied as intraday and interday variations. A relative standard deviation percentage (RSD%) value less than 3.0 indicates that the method is precise. Also, the accuracy of the method was tested by the analysis of the standard reference material (NIST SRM 2556) and by recovery measurements on spiked real samples. It was also shown that the optimised method was suitable for the analysis of trace amounts of Pt (IV) in roadside soil, tap water and wastewater samples.