Axial coordination of pyridyl-containing pentacenes to porphyrins

A pair of pentacenes that are functionalized in the 6-position with either a 3- or 4-pyridyl group via a triazole linker have been used to form complexes with a tetra(aryl)ruthenium(II) porphyrin through axial coordination. The pentacene–porphyrin dyads 5 and 6 have been structurally characterized through a combination of spectroscopic techniques. UV–vis spectroscopy shows that the absorption profiles of the two chromophores, the porphyrin and the pentacene, are complementary, providing absorptions throughout the UV and visible regions. While the dyads are reasonably stable in the solid state under ambient conditions they are, unfortunately, only stable in solution for hours when exposed to light and air.     

Highly Active Electrocatalyst Derived from ZIF-8 Decorated with Iron(III) and Cobalt(III) Porphyrin Toward Efficient Oxygen Reduction in Both Alkaline and Acidic Media

Zeolite imidazole frameworks 8(ZIF-8) and modified ones after pyrolysis are highly promising toward oxygen reduction reaction(ORR). Especially, the compositional modification of ZIF-8 is crucial to the enhancement of ORR performance, yet limited to the substitution of skeletal Zn(II) with other cations or simple physical adsorption of cations. Herein, we report the decoration of ZIF-8 with ORR active hemin(FeP) and Co(III) protoporphyrin(CoP) via the coordination between the peripheral carboxylic group of FeP and CoP with skeletal Zn(II). This allows well control over the quantity of loaded FeP and CoP, critical to the synthesis of advanced electrocatalysts. Subsequent pyrolysis of FeP and CoP co-decorated ZIF-8 leads to highly active ORR electrocatalysts with a half-wave potential(E_1/2) of 0. 913 V(vs. RHE) in 0.1 mol/L KOH aq. and an E_1/2 of 0.803 V(vs. RHE) in 0.1 mol/L HClO₄ aq. Moreover, our electrocatalyst shows much more improved and comparable durability in alkaline and acidic media, respectively, during 3000 cycles of cyclic voltammetry(CV) scanning relative to commercial Pt/C.     

Multi-(phenylthio)porphyrinato Ni(II) compounds: Synthesis,structures and properties

A series of multi-(phenylthio)porphyrinato Ni(II) compounds were synthesized without the participation of transition metal catalysts. All of these products were well characterized by ¹H NMR, ¹³C NMR and HRMS. Structures of three typical compounds were further confirmed by X-ray single crystal diffraction. Remarkable red shifts were observed in UV–vis absorption spectra of multi-(phenylthio)porphyrinato Ni(II) compounds which meet well with the electrochemical data. DFT calculation indicates that the phenylthio groups have strong effects on the frontier orbitals of these molecules. The order of a_1u-like and a_2u-like orbitals mainly distributed in porphyrin moiety is often inversed in energy when multi-phenylthio groups are attached.     

卟啉共价有机框架化合物的研究进展

共价有机框架化合物(COFs)是一类新兴的具有多孔结构的晶态有机聚合物,在储存与分离、催化、能量转化等领域具有广泛应用。本文介绍了一类基于卟啉单元的COFs,从框架构筑及应用开发两方面综述了这类材料的研究进展。     

Optical and Electronic Properties of Different Kinds of Water‐Soluble Porphyrin Films

Water‐soluble porphyrin‐porphyrin and porphyrin‐CdSe nanoparticle monolayer films were self‐assembled on different substrates. The influence of substrates, types of films, and heat treatment temperature on fluorescence of different kinds of porphyrin films was investigated. The SEM images showed the formation of monolayer films on porous alumina foil. The films assembled on porous alumina foil possessed higher fluorescence intensity and thermal stability. The result of conductance measurement indicated that the interaction of trimethylamidophenylporphyrin iodide (TAPPI) molecules with hydroxyl groups on porous alumina foil was weakened after CdSe nanoparticles assembled with TAPPI.     

Visible Light Photocatalytic Activity of Porphyrin Tin(IV) Sensitized TiO2 Nanoparticles for the Degradation of 4-Nitrophenol and Methyl Orange

A stable metalloporphyrin sensitized TiO₂ (Degussa P25) photocatalyst was prepared by using trans-dihydroxo[5,10,15,20-tetraphenylporphyrin]tin(IV) (SnP) as a sensitizer in a simple impregnation process. The solid diffuse reflectance ultraviolet-visible (UV-vis) spectrum of the SnP sensitized TiO₂ photocatalyst (SnP-TiO₂) indicated that there existed interaction between SnP and TiO₂. It was found that SnP-TiO₂ exhibited an enhanced visible light photocatalytic activity as compared with that over P25 for the degradation of 4-nitrophenol (4-NP) and methyl orange (MO) in aqueous solutions. The mechanism exploration showed that the degradation of MO and 4-NP experienced two different ways, that is, MO was photodegraded by reactive oxygen species and 4-NP was directly photodegraded by the excited state of SnP. Furthermore, it was found that the loading content of SnP had an important influence on the photocatalytic activity of TiO₂. The maximum photocatalytic efficiency was achieved when the contents of SnP were 25 mg and 30 mg per gram TiO₂ for MO and 4-NP, respectively. Importantly, SnP-TiO₂ was particularly stable and the photocatalytic activity was hardly decreased after being recycled seven times in the presence of oxygen, which could be attributed to the easy reductive regeneration of SnP.     

Electrochemiluminescence Enhanced by the Synergetic Effect of Porphyrin and Multi-walled Carbon Nanotubes for Uric Acid Detection

The design and exploration of efficient, stable and environmentally compatible organic emitters for an electrochemiluminescence (ECL) sensor is a promising topic. Herein, a novel environmentally-friendly luminophore, ZnBCBTP@MWCNTs, were fabricated via self-assembly of porphyrin molecules (ZnBCBTP) onto multi-walled carbon nanotubes (MWCNTs). The resulting luminophore ZnBCBTP@MWCNTs displayed not only the highly ECL property and but also the good accelerated electron mobility. Then, a label-free ECL biosensor based ZnBCBTP@MWCNTs was constructed for the ultrasensitive detection of uric acid. Excitingly, this proposed ECL biosensor performed a good linear relationship in the range of 0–300 μM with a low detection limit of 1.4 μM, thus offering another reliable and feasible sensing platform for clinical bioanalysis with good selectivity, stability, and repeatability.     

Synthesis and photophysical evaluations of β-fused uracil-porphyrin derivatives

New β-fused uracil-porphyrin conjugates were synthesized by the tetramerization of uracil-pyrroles under acidic conditions. Two different synthetic approaches were systematically studied in order to evaluate their efficiency, as well as the possibility to obtain a single regioisomer. Metallation effects were studied for aggregation in solution, and preliminary photophysical experiments were also performed in order to evaluate the potential of these new compounds.     

Optical Gas Sensor Fabrication Based on Porphyrin-Anchored Electrostatic Self-Assembly onto Tapered Optical Fibers

Tapered optical fibers with nano-assembled coatings of thicknesses of order tens of nanometres were used for the detection of ammonia gas. The film coating was composed of alternate layers of tetrakis-(4-sulfophenyl) porphine (TSPP) and poly(allylamine hydrochloride) (PAH), which were deposited using the electrostatic self-assembly process (ESA). Exposure of a PAH/TSPP nano-assembled non-adiabatic tapered optical fiber with a waist diameter of 10 µm to ammonia induced significant optical changes in the transmission spectrum of the optical fiber. The fiber optic sensor showed a linear sensitivity to the concentration of ammonia in the range of 10–100 ppm, with response and recovery times less than 100 and 240 sec, respectively. The 3σ limit of detection (LOD) was estimated to be ca. 2 ppm.     

Radiolysis of 5,10,15,20-tetrakis(N-methyl-4-pyridyl)-porphyrin or 5,10,15,20-tetrakis(4-sulfonatophenyl)-porphyrin in aqueous solution in the presence and in the absence of DNA or human serum albumin

The reduction of two free-base ionic porphyrins: 5,10,15,20-tetrakis(N-methyl-4-pyridyl)-porphyrin (TMPyP) and 5,10,15,20-tetrakis(4-sulfonatophenyl)-porphyrin (TSPP) by the hydrated electron was studied under neutral pH in aqueous solution in the absence and in the presence of biomolecules, DNA or HSA. Pulse radiolysis studies provided the spectra of the short-lived π-radical anions and steady-state radiolysis led to formation of stable phlorin or chlorin, the products of two-electron reduction and protonation at a meso and a pyrrolic nitrogen positions or at two β-pyrrole positions, respectively. Identification of the final reduction products was based on their reactivity to molecular oxygen—the phlorin, contrary to chlorine, was oxidized rapidly by O₂ to recover the original porphyrin. The stable product of TMPyP reduction was the phlorin, whereas for TSPP the chlorine and the phlorin were obtained. Addition of biomolecules to the solution resulted in changes of the porphyrins spectroscopic properties and in the decrease in rates of the occurring reduction processes proceeding with participation of the porphyrins.