New strategy for reversal tolerant anode for automotive polymer electrolyte fuel cell

New approach for the reversal tolerant anode for polymer electrolyte membrane fuel cell is suggested by using the multifunctional IrRu alloy catalyst having concurrent superior activities towards hydrogen oxidation reaction and oxygen evolution reaction to mitigate the degradation of anode under the fuel starvation condition.     

地方高校高分子材料与工程专业生产实习协同创新模式探讨

地方高校已成为我国高等教育的重要组成部分,由于办学目标、生源构成、服务地区不同于部属高校,其生产实习教学环节面临各种困境。寻求有效的途径突破生产实习的困境成为当前各地方高校亟待解决的问题。本文以广东工业大学为例,在分析该校的办学特点以及高分子材料与工程专业近年来生产实习状况的基础上,介绍该校以大学联盟为平台的生产实习新模式,并详细说明其实施方案。该模式基于该校的协同创新战略,已取得良好的教学效果。     

A modern approach to the solution and analysis of the Simha-Somcynsky model for the description of pressure-volume-temperature properties of polymer fluids

We revisit the Simha-Somcynsky model of polymer fluids with the purpose of developing novel theoretical and computational approaches to simplify and speed up its solution as well as the fitting of experimental data, and decrease its level of mathematical complexity. We report a novel method that allows us to solve one of the two equations of the model exactly, thus putting the level of mathematical difficulty on a par with the one of other models for polymer fluids. Moreover, we describe a computational algorithm capable of fitting all five parameters of the model in an unbiased way. The results obtained reproduce literature results and fit experimental pressure-volume-temperature and solubility parameter data for three polymers very accurately. Moreover, the new techniques allow for the investigation of the model at very low temperatures. Unexpectedly, the model predicts behaviors that could be interpreted as a glass transition, as routinely observed in dilatometry and differential scanning calorimetry, and a glass phase. We compared the predicted and experimental T g’s for cis poly(1,4-butadiene) and found an excellent quantitative agreement.     

Influence of thermal and UV treatment on the polypropylene/graphite composite

Electrically conductive polypropylene/graphite (PP/graphite) composites were prepared via blending granulated PP with maleic anhydride grafted PP and natural graphite. Electrical conductivity of prepared samples containing either 65, 70, or 75 wt% of graphite was measured and the most conductive sample containing 75 wt% of graphite was exposed to UV irradiation for 1 and 24 h or thermally treated at 170 °C for 1 h. The influence of thermal and UV exposure on the structural and electrical changes in such treated samples was studied. Local current measurements on the surface were made using scanning spreading resistance microscopy and morphology of the surface was studied by atomic force microscopy. X-ray diffraction analysis, infrared and Raman spectroscopy were also used for the structural characterization. Properties of treated and untreated samples are compared and differences are discussed.     

Strongly localized states in a single carbon nanotube with polymer molecules

A single-walled carbon nanotube (SWCNT) with conjugated polymer molecules is analyzed via optical spectroscopy. The presence of strongly localized excitonic states in the SWCNT is confirmed using time-integrated photoluminescence (PL). The PL spectrum exhibits extremely narrow width (~0.8 meV) which is attributed to the strong confinement of the states by polymer molecules. In addition, I observed that the excited states are gradually filled as a function of the excitation power, which supports the localized excitonic behavior. Only the ground excitonic state is observed at low excitation powers, but three additional PL peaks appear as the excitation power is increased. Especially, the power-dependent PL spectrum shows a blueshift and increased width, which can be elucidated in terms of quantum confined stark effect and the screening of induced electric fields. Overall, I demonstrate that the presence of polymer molecules induces several localized states in a single SWCNT.     

小实验大道理 ——从热缩片小制品DIY看高分子材料的熵致形变

A little experiment concerning the pyrocondensation materials was introduced in this paper. The aim was to help the public understand the principles of entropy induced deformation of polymer materials.     

Determination of tensile strength of UHMWPE fiber-reinforced polymer composites

Quasi-static tensile test of UHMWPE fiber-reinforced composite laminate is challenging to perform due to low interlaminar shear strength and low coefficient of friction. Tensile tests proposed in the literature were conducted and limitations associated with each method led to the evolution of a new method. Tensile test of single-ply was realized as the best representative of tensile strength of a composite than tensile test of UHMWPE laminate. A fixture was developed for single-ply tests which increased friction and provided the mechanical constraint to slipping. The fixture is easy to fabricate and has provided repeatable results for eight grades of UHMWPE fiber-based (0/90) fabrics. Reported tensile strengths are in quite high range of 900–1500 MPa.     

Analysis and fate of the hindered amine light stabilizer Tinuvin 622 in polyester powder coatings using high performance liquid chromatography / time of flight mass spectrometry

Hindered amine light stabilizers are used to protect polymers from heat- and light-induced degradation. In this study the oligomeric stabilizer Tinuvin 622 was analysed in-depth employing high performance liquid chromatography/time of flight mass spectrometry (HPLC/TOF-MS) to differentiate products of different manufacturers in respect of their terminating groups and oligomer length. Additionally, the behaviour of the stabilizer in uncured and cured polyester powder coatings was investigated regarding its interaction with the other coating components and chemical changes during the crosslinking process. The extraction efficiency was determined as a function of oligomer length and coating colour.     

EMI shielding performance of electroless coated iron nanoparticles on graphite in low-density polyethylene composite for X-band applications

In the proposed work, an investigation of shielding effectiveness (SE) for varying compositions of Graphene, Multiwall carbon nanotubes (MWCNT), and Iron nanoparticles coated on Graphite (Fe@Graphite) was conducted in X-band (8.2 GHz–12.4 GHz). All these are mixed in an LDPE matrix. The nanomaterial was subjected to chemical characterization, i.e., Scanning electron microscopy (SEM), X-ray diffraction (XRD), and vibrating sample magnetometry (VSM). The shielding observed is dominantly due to absorption. The lattice structure which facilitates the shielding due to absorption was the hexagonal graphite structure on whose surface iron nanoparticles were embedded and used as the magnetic filler. At the same time, Graphene and MWCNT act as electrically conducting fillers. The Total shielding effectiveness(SE_T) was maximum for LDPE, MWCNT, Graphene, and Fe@Graphite, in the ratio of 50: 5: 25: 20 by weight %, and is 49 dB at 9.65 GHz for a sample thickness of 3 mm.     

Organic Memristor Based on High Planar Cyanostilbene/Polymer Composite Films

Organic memristors with low power consumption, fast write/erasure speed, and complementary metal-oxide-semiconductor(CMOS) compatibility have attracted tremendous attention to mimic biological synapses to realize neuromorphic computation in recent years. In this paper, organic resistive switching memory(ORSM) based on (Z)-3-(naphthalen-2-yl)-2-(4-nitrophenyl)acrylonitrile(NNA) and polymer poly(N-vinylcarbazole)(PVK) composite film was prepared by spin-coating method. Device performance based on NNA:PVK composite films with different mass fractions of NNA were systematically investigated. The ORSM based on PVK:40%(mass fraction) NNA composite film exhibited non-volatile and bipolar memory properties with a switching ratio(I_on/I_off) of 24.1, endurance of 68 times and retention time of 10⁴ s, a “SET” voltage(V_set) of -0.55 V and a “RESET” voltage(V_reset) of 2.35 V. The resistive switching was ascribed to the filling and vacant process of the charge traps induced by NNA and the inherent traps in PVK bulk. The holes trapping and de-trapping process occurred when the device was applied with a negative or positive bias, which caused the transforming of the conductive way of charges, that is the resistive behaviors in the macroscopic. This study provides a promising platform for the fabrication of ORSM with high performance.