Aqueous-processed insulating polymer/nanocrystal solar cells with effective suppression of the leakage current and carrier recombination

As one of the most environmentally friendly photovoltaic(PV) conversion equipments,aqueousprocessed CdTe nanocrystal solar cells(NC SCs) have attracted great interest in recent years because of their excellent properties such as high charge-carrier mobility and broad absorption.However,two issues including interfacial recombination and leakage current seriously restrict their performance.In this paper,insulating polymer poly(vinyl pyrrolidone)(PVP) is introduced into CdTe NC SCs to solve the problems.The experimental results of transmission electron microscopy(TEM),atomic force micro scopy(AFM) and dark current measurements,etc.,demonstrate the leakage current is effectively suppressed by introducing PVP.Through further designing device structure,the reduction of interfacial recombination after introducing PVP is confirmed.By strategically taking the advantages of PVP properties(e.g.,water solubility and thermostability),the power conversion efficiency of the devices with PVP is enhanced by almost 37% compared to pure CdTe devices.This work demonstrates an effective and low-cost method to fabricate NC SCs via aqueous route.Moreover,it also proves that appropriate content of insulating polymer is of beneficial in promoting the PV performance.     

Statistics of polymer capture by a nanopore: A Brownian dynamics simulation study

We investigate the statistics of polymer capture by a nanopore using Brownian dynamics simulations. It is found that when the velocity flux is greater than a critical velocity flux, the capture picture is a random selection process, otherwise it tends to a statistical process governed by energetic considerations. In addition, the chain ends capture probability decreases as the chain length increases and satisfies a power-law scaling of P0(N)~N-0.8.     

A modern approach to the solution and analysis of the Simha-Somcynsky model for the description of pressure-volume-temperature properties of polymer fluids

We revisit the Simha-Somcynsky model of polymer fluids with the purpose of developing novel theoretical and computational approaches to simplify and speed up its solution as well as the fitting of experimental data, and decrease its level of mathematical complexity. We report a novel method that allows us to solve one of the two equations of the model exactly, thus putting the level of mathematical difficulty on a par with the one of other models for polymer fluids. Moreover, we describe a computational algorithm capable of fitting all five parameters of the model in an unbiased way. The results obtained reproduce literature results and fit experimental pressure-volume-temperature and solubility parameter data for three polymers very accurately. Moreover, the new techniques allow for the investigation of the model at very low temperatures. Unexpectedly, the model predicts behaviors that could be interpreted as a glass transition, as routinely observed in dilatometry and differential scanning calorimetry, and a glass phase. We compared the predicted and experimental T g’s for cis poly(1,4-butadiene) and found an excellent quantitative agreement.     

Strongly localized states in a single carbon nanotube with polymer molecules

A single-walled carbon nanotube (SWCNT) with conjugated polymer molecules is analyzed via optical spectroscopy. The presence of strongly localized excitonic states in the SWCNT is confirmed using time-integrated photoluminescence (PL). The PL spectrum exhibits extremely narrow width (~0.8 meV) which is attributed to the strong confinement of the states by polymer molecules. In addition, I observed that the excited states are gradually filled as a function of the excitation power, which supports the localized excitonic behavior. Only the ground excitonic state is observed at low excitation powers, but three additional PL peaks appear as the excitation power is increased. Especially, the power-dependent PL spectrum shows a blueshift and increased width, which can be elucidated in terms of quantum confined stark effect and the screening of induced electric fields. Overall, I demonstrate that the presence of polymer molecules induces several localized states in a single SWCNT.     

Determination of tensile strength of UHMWPE fiber-reinforced polymer composites

Quasi-static tensile test of UHMWPE fiber-reinforced composite laminate is challenging to perform due to low interlaminar shear strength and low coefficient of friction. Tensile tests proposed in the literature were conducted and limitations associated with each method led to the evolution of a new method. Tensile test of single-ply was realized as the best representative of tensile strength of a composite than tensile test of UHMWPE laminate. A fixture was developed for single-ply tests which increased friction and provided the mechanical constraint to slipping. The fixture is easy to fabricate and has provided repeatable results for eight grades of UHMWPE fiber-based (0/90) fabrics. Reported tensile strengths are in quite high range of 900–1500 MPa.     

Analysis and fate of the hindered amine light stabilizer Tinuvin 622 in polyester powder coatings using high performance liquid chromatography / time of flight mass spectrometry

Hindered amine light stabilizers are used to protect polymers from heat- and light-induced degradation. In this study the oligomeric stabilizer Tinuvin 622 was analysed in-depth employing high performance liquid chromatography/time of flight mass spectrometry (HPLC/TOF-MS) to differentiate products of different manufacturers in respect of their terminating groups and oligomer length. Additionally, the behaviour of the stabilizer in uncured and cured polyester powder coatings was investigated regarding its interaction with the other coating components and chemical changes during the crosslinking process. The extraction efficiency was determined as a function of oligomer length and coating colour.     

Measuring densities of polymers by magneto-archimedes levitation

In magneto-Archimedes levitation, a polymer can be levitated to a balanced position, and its levitation height is mainly related to the density of the polymer. Here, a novel method for measuring the density of polymers based on magneto- Archimedes levitation is proposed. For a designed measurement device, an equation can be fitted by a series of experiments with standard density glass beads. Then, the polymer's density can be calculated via the equation. In this paper, a device with magnets at a distance of 60 mm was chosen as an example. Experimental results showed that the proposed method could measure all types of polymer with an accuracy of 0.002–0.01 g/cm³. Moreover, the proposed method can clearly distinguish between polymers with small density differences (<0.03 g/cm³). Because of its high accuracy, high sensitivity, low cost and convenience, the proposed method could be widely used in polymer testing, especially in density-based testing.     

不断向自然与金属冶金学习的高分子加工

总结了高分子材料加工的发展趋势及发展历程,并指出过去很多加工新技术的出现都得益于从自然现象及其他材料行业中获得很好的借鉴,如从蜘蛛吐丝发展出溶液纺丝成型、从玻璃吹制发展出吹塑成型、从金属锻造发展出压延成型及固相拉拔成型等;随后针对生物基可生物降解的立构复合型聚乳酸难以采用传统熔融加工方法成型的问题,借鉴金属粉末冶金加工的思路,提出了一种通过低温烧结制备高性能立构复合型聚乳酸制品的新方法.通过这种加工方法不仅可以有效解决立构复合型聚乳酸在熔融加工过程中熔体稳定性差、易降解的问题,而且可以制得耐热性好、光学透明度高、耐水解降解性佳、综合力学性能优异的高性能聚乳酸制品.     

地方高校高分子材料与工程专业生产实习协同创新模式探讨

地方高校已成为我国高等教育的重要组成部分,由于办学目标、生源构成、服务地区不同于部属高校,其生产实习教学环节面临各种困境。寻求有效的途径突破生产实习的困境成为当前各地方高校亟待解决的问题。本文以广东工业大学为例,在分析该校的办学特点以及高分子材料与工程专业近年来生产实习状况的基础上,介绍该校以大学联盟为平台的生产实习新模式,并详细说明其实施方案。该模式基于该校的协同创新战略,已取得良好的教学效果。     

Organic Memristor Based on High Planar Cyanostilbene/Polymer Composite Films

Organic memristors with low power consumption, fast write/erasure speed, and complementary metal-oxide-semiconductor(CMOS) compatibility have attracted tremendous attention to mimic biological synapses to realize neuromorphic computation in recent years. In this paper, organic resistive switching memory(ORSM) based on (Z)-3-(naphthalen-2-yl)-2-(4-nitrophenyl)acrylonitrile(NNA) and polymer poly(N-vinylcarbazole)(PVK) composite film was prepared by spin-coating method. Device performance based on NNA:PVK composite films with different mass fractions of NNA were systematically investigated. The ORSM based on PVK:40%(mass fraction) NNA composite film exhibited non-volatile and bipolar memory properties with a switching ratio(I_on/I_off) of 24.1, endurance of 68 times and retention time of 10⁴ s, a “SET” voltage(V_set) of -0.55 V and a “RESET” voltage(V_reset) of 2.35 V. The resistive switching was ascribed to the filling and vacant process of the charge traps induced by NNA and the inherent traps in PVK bulk. The holes trapping and de-trapping process occurred when the device was applied with a negative or positive bias, which caused the transforming of the conductive way of charges, that is the resistive behaviors in the macroscopic. This study provides a promising platform for the fabrication of ORSM with high performance.