A review of recent advances in catalytic combustion of VOCs on perovskite-type catalysts

Along with the rapid development of industry, VOCs gradually move into the spotlight, and now become a kind of harmful environmental pollutants that cannot be overlooked. This paper introduces the hazards of VOCs and the common catalytic combustion catalysts, noble metal catalysts and non-noble metal catalysts, for the elimination of VOCs. Perovskite catalysts, as one of the non-noble catalysts, play an important role in the field of catalytic combustion in recent years. According to the classification of elements doping in perovskites, the research achievements in the past five years were analyzed and reviewed. In addition, this paper also analyzes and elaborates the reaction kinetics and QSAR/QSPR models for the introduction of structural properties and reaction mechanisms.     

Assessment of synthetic cannabinoid FUB-AMB and its ester hydrolysis metabolite in human liver microsomes and human blood samples using UHPLC–MS/MS

FUB-AMB, an indazole carboxamide synthetic cannabinoid recreational drug, was one of the compounds most frequently reported to governmental agencies worldwide between 2016 and 2019. It has been implicated in intoxications and fatalities, posing a risk to public health. In the current study, FUB-AMB was incubated with human liver microsomes (HLM) to assess its metabolic fate and stability and to determine if its major ester hydrolysis metabolite (M1) was present in 12 authentic forensic human blood samples from driving under the influence of drug cases and postmortem investigations using UHPLC–MS/MS. FUB-AMB was rapidly metabolized in HLM, generating M1 that was stable through a 120-min incubation period, a finding that indicates a potential long detection window in human biological samples. M1 was identified in all blood samples, and no parent drug was detected. The authors propose that M1 is a reliable marker for inclusion in laboratory blood screens for FUB-AMB; this metabolite may be pharmacologically active like its precursor FUB-AMB. M1 frequently appears in samples in which the parent drug is undetectable and can point to the causative agent. The results suggest that it is imperative that synthetic cannabinoid laboratory assay panels include metabolites, especially known or potential pharmacologically active metabolites, particularly for compounds with short half-lives.     

Catalytic Platinum Nanoparticles Decorated with Subnanometer Molybdenum Clusters for Biomass Processing

The development of improved technologies for biomass processing into transportation fuels and industrial chemicals is hindered due to a lack of efficient catalysts for selective oxygen removal. Here we report that platinum nanoparticles decorated with subnanometer molybdenum clusters can efficiently catalyze hydrodeoxygenation of acetic acid, which serves as a model biomass compound. In contrast with monometallic Mo catalysts that are inactive and monometallic Pt catalysts that have low activities and selectivities, bimetallic Pt–Mo catalysts exhibit synergistic effects with high activities and selectivities. The maximum activity occurs at a Pt to Mo molar ratio of three. Although Mo atoms themselves are catalytically inactive, they serve as preferential binding anchors for oxygen atoms while a catalytic transformation proceeds on neighboring surface Pt atoms. Beyond biomass processing, Pt–Mo nanoparticles are promising catalysts for a wide variety of reactions that require a transformation of molecules with an oxygen atom and, more broadly, in other fields of science and technology that require tuning of surface–oxygen interactions.     

Determination of tensile strength of UHMWPE fiber-reinforced polymer composites

Quasi-static tensile test of UHMWPE fiber-reinforced composite laminate is challenging to perform due to low interlaminar shear strength and low coefficient of friction. Tensile tests proposed in the literature were conducted and limitations associated with each method led to the evolution of a new method. Tensile test of single-ply was realized as the best representative of tensile strength of a composite than tensile test of UHMWPE laminate. A fixture was developed for single-ply tests which increased friction and provided the mechanical constraint to slipping. The fixture is easy to fabricate and has provided repeatable results for eight grades of UHMWPE fiber-based (0/90) fabrics. Reported tensile strengths are in quite high range of 900–1500 MPa.     

Silica microbeads capture fetal nucleated red blood cells for noninvasive prenatal testing of fetal ABO genotype

ABO hemolytic disease of the newborn (ABO-HDN), which may cause neonatal jaundice and polycythemia, or even stillbirth or neonatal death, is widespread in China. Prenatal testing for the fetal ABO blood group can reduce unnecessary concerns or ensure prompt treatment. Herein, we presented a method to employ high-density silica microbeads (SiO₂ MBs) for capturing fetal nucleated red blood cells (fnRBCs) in maternal peripheral blood, and we detected the ABO genotype of the fetus using these captured cells. We evaluated 52 patients using the SiO₂ MBs. Among 26 pregnant women with type O blood, 8 (30.8%) of the fetuses had type A blood, 5 (19.2%) had type B blood, and 13 (50%) had type O blood. SRY genes were detected in all 27 male fetuses. This study represents a simple and effective method for noninvasive prenatal detection of the fetal ABO genotype. We believe that this method has great potential for noninvasive prenatal testing of the fetal Rh blood group and other fetal diseases as well.     

An experimental investigation into non-linear wave loading on horizontal axis tidal turbines

Tidal turbines are subject to large hydrodynamic loads from combinations of currents and waves, which contribute significantly to fatigue, extreme loading and power flow requirements. Physical model testing enables these loads and power fluctuations to be assessed and understood in a controlled and repeatable environment. In this work, a 1:15 scale tidal turbine model is utilised to further the fundamental understanding of the influence of waves on tidal turbines. A wide range of regular waves are generated in both following-current and opposing-current conditions. Wave frequencies range from 0.31 Hz to 0.55 Hz & wave heights from 0.025 m to 0.37 m in a fixed 0.81 m/s current velocity. Waves are selected and programmed specifically to facilitate frequency domain analysis, and techniques are employed to isolate the effect of non-linear waves on turbine power and thrust.Results demonstrate that wave action induces large variations in turbine power and thrust compared to current only conditions. For the range of conditions tested, peak values of thrust and power exceed current-only values by between 7%–65% and 13%–160% respectively. These wave-induced fluctuations are shown to increase with wave amplitude and decrease with wave frequency. Following wave conditions exhibit greater variations than opposing for waves with the same wave height and frequency due to the lower associated wavenumbers.A model is developed and presented to aid the understanding of the high-order harmonic response of the turbine to waves, which is further demonstrated using steady state coefficients under assumptions of pseudo-stationarity. This approach is proven to be effective at estimating wave-induced power and thrust fluctuations for the combinations of waves, currents and turbine state tested. The outcome of which shows promise as a rapid design tool that can evaluate the effect of site-specific wave–current conditions on turbine performance.     

Optimal intervention under stress scenarios: A case of the Korean financial system

We consider optimal intervention methods under budget constraints when financial systems face economic shocks. We propose two policies formulated by mixed-integer linear programs where regulators inject cash into institutions. One is to minimize systemic losses, and the other is to minimize the number of defaulting institutions. Using publicly available data on the Korean financial system, we construct its entire network and apply stress scenarios to the system to compare the performances of intervention strategies and derive insights on their workings.     

CuI/l-proline catalyzed click reaction in glycerol for the synthesis of 1,2,3-triazoles

Despite the apparent simplicity of the copper(I) iodide catalyzed CuAAC reaction, the conversion of the catalytic species, i.e. Cu(I) to thermodynamically more stable Cu(II), via aerial oxidation or disproportionation is a major issue. To stabilize the Cu(I) species, the reaction is ideally carried out under an inert atmosphere in the presence of additives such as alcohols, amines, thiols, and aldehydes. Herein, we report the first CuI catalyzed click reaction without an inert atmosphere by employing the CuI/l-proline system in glycerol. The method showed remarkable stability towards sensitive functional groups such as acetonides and 1,2,4-trioxanes.     

强耦合腔-QED系统中原子的纳秒脉冲激发光谱研究

本文在多原子强耦合腔-QED系统中,利用脉冲宽度为5 ns的强脉冲光在垂直于腔轴方向直接激发原子,脉冲的峰值功率为40 mW,通过光学腔观测激发原子辐射到腔中的光子获得相应的激发光谱。我们发现当光场频率和原子跃迁失谐±80 MHz时原子激发率达到最大,而在共振时原子激发被抑制。我们建立了脉冲光与三能级原子相互作用的模型,通过缀饰态能够解释此现象。     

Measuring densities of polymers by magneto-archimedes levitation

In magneto-Archimedes levitation, a polymer can be levitated to a balanced position, and its levitation height is mainly related to the density of the polymer. Here, a novel method for measuring the density of polymers based on magneto- Archimedes levitation is proposed. For a designed measurement device, an equation can be fitted by a series of experiments with standard density glass beads. Then, the polymer's density can be calculated via the equation. In this paper, a device with magnets at a distance of 60 mm was chosen as an example. Experimental results showed that the proposed method could measure all types of polymer with an accuracy of 0.002–0.01 g/cm³. Moreover, the proposed method can clearly distinguish between polymers with small density differences (<0.03 g/cm³). Because of its high accuracy, high sensitivity, low cost and convenience, the proposed method could be widely used in polymer testing, especially in density-based testing.