宽体液腔Janus-Helmholtz换能器

本文使用有限元方法对宽体液腔Janus-Helmholtz(JH)换能器进行了仿真分析,得出了壳体宽度拓展增量对JH换能器工作性能的影响规律。使用三维建模的方式,分析了连接部分对换能器性能的影响及宽体壳体的的模态,证明了三维建模的必要性。依据仿真优化结构设计了一款宽体液腔JH换能器并进行了湖上测试。最终测试结果与仿真结果有很好的一致性,相较直筒JH换能器其谐振频率降低300Hz,发射电压响应最高可达144dB。     

基于有序介孔碳的氯离子选择性电极的制备及其在手持传感系统中的应用

以有序介孔碳(OMC)球为离子-电子转换层,制备了固态氯离子选择性电极,构建了基于离子敏感的场效应晶体管(ISFET)的手持式传感系统,用于检测人体血清中的氯离子。优化了OMC前驱体的碳化温度,探究了OMC形貌结构对电极传感性能的影响;电极柔性化制备后考察了其在手持系统中对氯离子的检测效果。结果表明,最优条件下,电极在5.12×10^-4~1.02 mol/L的浓度范围呈现线性响应,响应斜率为60 mV/decade。该柔性电极在手持传感系统中展现出高灵敏度和重现性,可用于人体血清样品中氯离子的检测,其回收率为96.3%~104.9%。     

Properties of cat-eye modulating retro-reflector and its application with piezoelectric transducer

Piezoelectric cat-eye modulating retro-reflector (MRR) is the core component of an acousto-optic retro-identification system. The influence of the optical parameters (link distance l, lens focal length f and the detector diameter r) to the cat-eye effect was analyzed theoretically and experimentally. A piezoelectric cat-eye retro-identification (PCERI) system was built, and an information transmission ratio of 2 kHz was achieved which can satisfy an access control system.     

Interactions of DNA with graphene and sensing applications of graphene field-effect transistor devices: A review

Graphene field-effect transistors (GFET) have emerged as powerful detection platforms enabled by the advent of chemical vapor deposition (CVD) production of the unique atomically thin 2D material on a large scale. DNA aptamers, short target-specific oligonucleotides, are excellent sensor moieties for GFETs due to their strong affinity to graphene, relatively short chain-length, selectivity, and a high degree of analyte variability. However, the interaction between DNA and graphene is not fully understood, leading to questions about the structure of surface-bound DNA, including the morphology of DNA nanostructures and the nature of the electronic response seen from analyte binding. This review critically evaluates recent insights into the nature of the DNA graphene interaction and its affect on sensor viability for DNA, small molecules, and proteins with respect to previously established sensing methods. We first discuss the sorption of DNA to graphene to introduce the interactions and forces acting in DNA based GFET devices and how these forces can potentially affect the performance of increasingly popular DNA aptamers and even future DNA nanostructures as sensor substrates. Next, we discuss the novel use of GFETs to detect DNA and the underlying electronic phenomena that are typically used as benchmarks for characterizing the analyte response of these devices. Finally, we address the use of DNA aptamers to increase the selectivity of GFET sensors for small molecules and proteins and compare them with other, state of the art, detection methods.     

Einsatz von DMS- und Piezomeßtechnik zur direkten Schubspannungsermittlung in der Kapillarrheometrie

Zusammenfassung Der Stand der Kapillarheometrie mit den Vor- und Nachteilen der einzelnen Systeme und Meßverfahren wird dargestellt. Ausgehend von diesem Stand werden zwei alternative Meßverfahren, nämlich Piezo-Einzelkraftund DMS-Meßverfahren, zur direkten Schubspannungsermittlung besprochen und eine nach diesem Prinzip konzipierte Versuchsdüse vorgestellt. Die mit dieser Düse erhaltenen Meßergebnisse zeigen im Vergleich zu konventionell, d. h. unter Anwendung des Bagley-Verfahrens, ermittelten Fließkurven im Falle der Einzelkraftmessung gute Übereinstimmung. Das Problem der Einlaufdruckkorrektur ist bei diesem Konzept von vornherein nicht vorhanden, und der ununterbrochene Fließkanal erlaubt, bei entsprechender Erweiterung auf zwei Kraftaufnehmer, einen unproblematischen Einsatz im On-line- oder sogar im In-line-Betrieb in der Polymerverarbeitung.Schlüsselwörter Rheometrie; Kapillarrheometrie; Schubspannungsermittlung; Piezokraftmessung; DMS-Anwendung; Kunststoffschmelzen; On-line-Rheometrie

---

The state-of-the-art of capillary rheometry, especially the advantages and disadvantages of different systems, is presented. Two measuring methods, a piezo single-force transducer, and a strain-gauge device combined in a testing die are compared. The strain gauges are fixed at the outside of a small capillary to detect the resulting wall shear stress between inner surface of the die and polymer flow by measuring the axial strain in the wall of the die. The single force method uses an elastic section of the die which uncouples the die from the supporting structure without changing the cross-section of the flow. The uncoupled part of the die is supported by a stiff, piezo-force transducer that detects the integral effect of wall shear stress. The resulting flow curves compare well with those using the Bagley method. With the novel die no entrance pressure-loss correction is needed. In principle, it also could be used as an on-line device for polymer processing.

Vortrag, gehalten auf der Jahrestagung der Deutschen Rheologischen Gesellschaft, TH Darmstadt, 19.–21. April 1989.     

Measurement of concrete internal strain using a three-dimensional transducer system

A new three-dimensional transducer system is introduced in this paper, which enables the measurement of six internal components of strain tensor in concrete members. Laboratory tests and strain analyses were carried out to evaluate this tranducer system. The results show that the system is effective in measuring internal strains of concrete members. It was then embedded in a reinforced concrete bridge deck in Macomb County, Michigan. Field tests were conducted to measure the strains in the deck under truck wheel load. The results were used to understand the deck's strain and stress behavior under truck wheel load.     

Nano-sized local magnetic field induced by circular motion of ions and molecules in a nanotorus under gigahertz rotating electric fields

Recently, we reported molecular dynamics simulations of stable cyclotron motions of ions and water molecules in a carbon nanotorus, induced by different rotating electric fields (EFs). This study is devoted to the calculation and characterisation of the magnetic field (MF) induced by these cyclotron motions. Results show that carbon nanotorus containing ions or water molecules acts as an EF-to-MF transducer. Components of the instantaneous induced MF show large-scale oscillations superimposed by strong fluctuations arising respectively from overall circular motion and random collisions of moving species. Analysis of the space-dependencies of the induced MF components shows that the induced MF is maximum at the centre of the nanotorus. The MF induced by cyclotron motion of ions follows the orders B(Ca²⁺)?>?B(Na⁺)?≈?B(K⁺) at E?=?1.0?V/nm and B(E?=?1.0?V/nm)?>?B(E?=?0.5?V/nm)?>?B(E?=?0.1?V/nm). The time-averaged induced MF of the cyclotron motion of 81 water molecules is almost 10² times stronger than that of ions. The induced MF strength is decreased with increasing distance from nanotorus and decays effectively at about 17.3–18.1 and 15.9–18.2?nm along the z-axis of the nanotorus for ions and water molecules, respectively. The magnitude of the MF induced by cyclotron motions of water molecules and ions, respectively, decreases and increases in the nanotorus with freed carbon atoms.     

Modeling nonlinear Rayleigh wave fields generated by angle beam wedge transducers—A theoretical study

Nonlinear Rayleigh wave fields generated by an angle beam wedge transducer are modeled in this study. The calculated area sound sources underneath the wedge are used to model the fundamental Rayleigh sound fields on the specimen surface, which are more accurate than the previously used line sources with uniform or Gaussian amplitude distributions. A general two-dimensional nonlinear Rayleigh wave equation without parabolic approximation is introduced and the solutions are obtained using the quasilinear theory. The second harmonic Rayleigh wave due to material nonlinearity is given in an integral expression with these fundamental Rayleigh waves radiated by the wedge transmitter acting as a forcing function. Multi-Gaussian beam (MGB) models are employed to simplify these integral solutions and to extract the diffraction and attenuation correction terms explicitly. The effect of nonlinearity of generating sources on the second harmonic Rayleigh wave fields is taken into consideration; simulation results show that it will affect the magnitude and diffraction correction of the second harmonic waves in the region close to the Rayleigh wave sound sources. This research provides a theoretical improvement to alleviate the experimental restriction on analyzing the effects of diffraction, attenuation and source nonlinearity when using angle beam wedge transducers as transmitters.     

基于声表面波技术实现数字微流体多基片间输运

建立了声表面波实现多基片间输运微流体的新方法.由3个128(0)YX-LiNbO3压电基片组成,一个基片为接口基片,另两个为工作基片,每个基片光刻一个中心频率为27.5 MHz叉指换能器和一个反射栅.采用微量进样器将待输运的数字微流体进样到工作基片2,调节接口基片使得其与工作基片2位于同一高度,并使其间隙尽可能小,在工...     

多元相控聚焦探测器的方向特性

研究了多元线性阵列探测器的主频、阵元个数和阵元间距对探测器方向性的影响.实验结果表明,采用主频为2～5 MHz,阵元数为5～15,阵元间距为0.3～0.9 mm的多元线性阵列探测器,其方向性好,将有利于光声信号的探测与成像.