TiO2-coated graphene oxide-molybdate complex as a new separable nanocatalyst for the synthesis of pyrrole derivatives by Paal-Knorr reaction

The preparation of chemical and pharmaceutical compounds through organic reactions has always been associated with the production of environmental waste. Growth population and concerns about ecological pollution increase the interest in using heterogeneous solid catalysts with capabilities such as increasing reaction efficiency and reducing the production of by-products, as well as the ability to separate and reuse. To develop and benefit such catalysts as much as possible, in this study, using graphene oxide (GO) as a support, we succeeded in preparing a heterogeneous catalyst with a high contact surface, excellent performance, and recyclability. Graphene oxide nanosheets were synthesized according to Hummer’s method. hexamolybdate anions ([n-Bu₄N]₂[Mo₆O₁₉]) were placed on this support as a catalytically active site using linkers. The structure of this catalyst was confirmed by XRD, FT-IR, EDS, SEM, TEM, TGA, Raman, and nitrogen adsorption–desorption analyses, and it was used to produce pyrroles by the Paal-Knorr method. The performance of the synthesized nanocatalyst was satisfactory for all the derivatives studied. Recovery and reuse of GO@TiO₂@(CH₂)₃N = Mo[Mo₅O₁₈] after catalytic reactions were examined. This catalyst could be quickly recovered by simple filtration and recycled ten times without significant loss of its catalytic activity.     

Nanocomposites based on cationic polyelectrolytes and silver nanoparticles: Synthesis,characterization, molybdate retention and antimicrobial activity

The objective of this work was to synthesize nanocomposites based on cationic polyelectrolytes and silver nanoparticles using poly(N-vinylbenzyl-N-triethylammonium chloride) as polymer phase. For that, a nanostructured crosslinker was synthesized from silver nanoparticles (AgNPs) and acrylic acid. Molybdate retention properties of nanocomposites were studied in function of pH and ionic strength. In addition, their antimicrobial properties were evaluated against E. coli and S. aureus. It was evidenced that AgNPs can be stabilized using acrylic acid and that this material can be incorporated to the polymer phase during polymerization by free radical of cationic monomers. The effect of pH on retention of molybdate, by the nanostructured polymer, was significant only to low ionic strength (the order seen was pH 5.0 > pH 7.0 > pH 9.0 for 0.0% NaCl). Results suggest that the main interaction influencing the molybdate retention is electrostatic in nature. Finally, antimicrobial activity was enhanced by incorporation of polymerizable nanostructured crosslinker based on AgNPs.     

钼酸根阴离子印迹陶瓷膜的制备与吸附性能

以三氧化二铝陶瓷膜为载体,以钼酸根阴离子为模板离子,1-乙烯基咪唑为功能单体,1,6-二溴己烷为交联剂,采用表面印迹和接枝聚合方法制备了能选择性吸附Mo(Ⅵ)的新型印迹陶瓷膜(IIP-PVI/CM).采用红外光谱、X射线光电子能谱、热重分析及扫描电子显微镜等方法对陶瓷膜进行结构表征.研究了pH值对吸附性能的影响,当pH值范围为2~4时,IIP-PVI/CM具有良好吸附能力;动力学和热力学结果表明,IIP-PVI/CM对Mo(Ⅵ)的吸附符合准二级动力学模型和Langmuir吸附模型;当pH=4.0和温度为30℃时,IIP-PVI/CM对Mo(Ⅵ)具有良好选择性,Mo(Ⅵ)对W(Ⅵ)的选择性系数高达7.48;动态吸附结果表明,IIP-PVI/CM对W(Ⅵ)和Mo(Ⅵ)的吸附饱和时间分别为24和47 min,饱和吸附量分别为0.163和0.672 mmol/100 g,动态吸附时IIP-PVI/CM亦具有良好选择性;经9次吸附与解吸后,IIP-PVI/CM对Mo(Ⅵ)吸附容量仍可达到初始值的92%,再生和循环使用性能良好.     

Solid-solution red phosphors for white LEDs

Solid solutions of Eu³⁺-doped metal tungstate and molybdate phosphors were synthesized by solid-state reactions. The crystal structure of the solid-solution phosphors was determined to be tetragonal with a space group of I4₁/c. The red-emitting solid-solution phosphors exhibited a broad absorption band in the range 220-340 nm and sharp excitation peaks in the near UV to green region. The emission intensities of the solid-solution phosphors were enhanced due to the stiff lattices, as a result of the ordered distribution of cations and anions according to differences in ionic size. The increase in the energy transfer is discussed in terms of metal-ligand distances, ionization potential of Mo and the relatively large overlap between the excitation and emission spectra. Such solid-solution phosphors with a bright red emission intensity, relatively short decay time and appropriate color chromaticity have potential for use as red-emitting materials for white LEDs.     

Optical spectroscopy, 1.5 μm emission and up-conversion properties of Er-doped Li3Ba2Gd3(MoO4)8 crystal

Er³⁺:Li₃Ba₂Gd₃(MoO₄)₈ crystal has been grown from a melt of Li₂MoO₄ by the top seeded solution growth method (TSSG). The polarized spectral properties of Er³⁺:Li₃Ba₂Gd₃(MoO₄)₈ crystal were investigated and the spectroscopic parameters were calculated and analyzed based on the Judd-Ofelt (J-O) theory. The emission cross-sections were calculated by the Fuchtbauer-Ladenburg (F-L) equation and the peak values of the emission band at 1535 nm were 9.7×10⁻²¹, 7.9×10⁻²¹ and 8.4×10⁻²¹ cm² for E∥b, E∥D1 and E∥D2, respectively. Under 977 nm excitation five up-conversion fluorescence bands around 490, 530, 550, 660 and 800 nm were observed, and the possible up-conversion mechanisms were proposed.     

Novel powellite-based red-emitting phosphors: CaLa1−xNbMoO8:xEu for white light emitting diodes

We report the photoluminescence properties of a novel powellite-based red-emitting phosphor material: CaLa_1−xNbMoO₈:xEu³⁺ (0.01, 0.03, 0.05, 0.1) for the first time. The photoluminescence investigations indicated that CaLa_1−xNbMoO₈:xEu³⁺ emits strong red light at 615 nm originating from ⁵D₀→⁷F₂ (electric dipole transition) under excitation either into the ⁵L₀ state with 394 nm or the ⁵D₂ state with 464 nm, that correspond to the two popular emission lines from near-UV and blue LED chips, respectively. When compared with emission intensity from a CaMoO₄:Eu³⁺, the emission from CaLaNbMoO₈:Eu³⁺ showed greater intensity values under the same excitation wavelength (394 nm). The enhanced red emission is attributed to the enhanced f-f absorption of Eu³⁺. These materials could be promising red phosphors for use in generating white light in phosphor-converted white light emitting diodes (WLEDs).     

Characterisation of the anodic layers formed on 2024 aluminium alloy, in tetraborate electrolyte containing molybdate ions

Anodic layer growth on 2024 aluminium alloy at 70 °C, under 40 V, during 60 min, in 50 g L⁻¹ di-sodium tetraborate solution containing di-sodium molybdate from 0.1 to 0.5 M (pH 10) is examined. Anodising behaviours strongly depend on additive concentration. Development of anodic films is favoured with weak molybdate additions (<0.3-0.4 M). The film thicknesses increase and the porosity of anodic layers decreases. Molybdenum (+VI), detected by X-ray photoelectron spectroscopy (XPS) analysis, is present in the anodic films and the Mo incorporation, studied by energy dispersive spectroscopy (EDS) analysis, increases with molybdate concentration. However, for high molybdate concentrations (>0.4 M), anodising behaviour becomes complex with the formation of a blue molybdenum oxide at the cathode. The growth of aluminium oxide is hindered. As the anodic layers are thinner, the Mo(+VI) incorporation significantly decreases. These two configurations implicate different corrosion performances in 5% sodium chloride solution at 35 °C. As the alkaline anodic layer formed with 0.3 M molybdate species is the thickest and the Mo incorporation is the more pronounced, its corrosion resistance is the highest. The effect of morphology and composition of anodic films on pitting corrosion is also discussed.     

Phase formation, structural and microstructural characterization of novel oxynitride-perovskites synthesized by thermal ammonolysis of (Ca,Ba)MoO4 and (Ca,Ba)MoO3

Reactions of AMoO₄ and AMoO₃ (A=Ca²⁺, Ba²⁺) with ammonia were investigated at 873 K<T<1123 K with the particular intention to synthesize novel oxynitride-perovskites of the general composition AMo(O,N)₃ and to study their crystal structure. CaMo(O,N)₃ and BaMo(O,N)₃ were prepared by thermal ammonolysis of the corresponding CaMoO₃ and BaMoO₃ precursors at T=898 and 998 K, respectively. The structural parameters of the oxynitrides were obtained from Rietveld refinements of X-ray and neutron powder diffraction data. CaMo(O,N)₃ crystallizes in the GdFeO₃ distorted perovskite structure with orthorhombic space group Pbnm and a=5.5029(1) Å, b=5.5546(1) Å, c=7.8248(1) Å as determined by X-ray powder diffraction. Its O/N content refined from the neutron diffraction data corresponds to the composition CaMoO_1.7(1)N_1.3(1). BaMo(O,N)₃ crystallizes in the cubic perovskite structure with space group Pm3¯m and a=4.0657(1) Å as determined by X-ray powder diffraction. Transmission electron microscopy reveals a complex microstructure for both CaMoO₃ and CaMoO_1.7(1)N_1.3(1) represented by twin domains of different orientation.     

Kinetic spectrophotometric determination of submicromolar orthophosphate by molybdate reduction

A kinetic spectrophotometric procedure was developed for determination of submicromolar orthophosphate based on the reaction in which orthophosphate serves as a catalyst in the reduction of molybdenum, and the initial rate of molybdenum-blue formation (λ_max = 780 nm) is proportional to the concentration of orthophosphate in the samples. The detection limit (3 × standard deviation of blank, n = 8) was 6 nM and the linear calibration ranged from 10 to 100 nM (r² = 0.997). The precisions of this method were 3.3% at 10 nM and 5.4% at 50 nM (n = 8), respectively. Similar to other molybdate based methods, silica and arsenate in the samples can interfere with phosphate determination. The responses of silicate and arsenate were about 25% and 7% of that of orthophosphate, respectively, and their interferences were enhanced in the presence of phosphate in the samples due to the synergistic effect of phosphate with arsenate or silicate on the molybdate reagent.     

Influence of fluoride on f-f transitions of Eu in LiEuM2O8 (M=Mo, W)

The influence of fluoride on the luminescence of LiEuM₂O₈ (M=Mo, W) was studied. LiEuMo₂O₈ and LiEuW₂O₈ formed the whole range of solid solutions, which emitted intense red luminescence under the excitations by 395, 465 and 535 nm wavelengths. When doped with fluoride, the materials also formed solid solutions and the luminescent intensity was remarkably enhanced. The phosphor with optimized compositions in this system would be a promising red component for solid-state lighting devices based on GaN light-emitting diodes.