Optical current transducer with bulk type Bi12SiO20 faraday sensor for power systems

Two types of optical current transducers (OCTs) have a bulk Faraday sensor inserted into the gap of an iron core and a porcelain insulator with optical fiber. The sensor consists of Bi₁₂SiO₂₀ (BSO) single crystal, a polarizer, and an analyzer. The OCTs satisfied the target performance requirement for fault location and metering and demonstrated maintained performance at some power utilities in Japan and the US. We have developed a fault location system that immediately detects the fault current with the OCTs, there by locating the fault section. The OCT can easily replace the existing support insulators for the disconnecting switch without any modifications to structure height or bus-bar. For metering requiring 0.3% class accuracy, use of a BSO with right optical rotatory power combined with BSO with left optical rotatory power results in a Faraday sensor with improved temperature characteristics. The OCT demonstrated 0.3% class accuracy for metering described in the current transformer Specifications of IEEE C57–13, 1993.     

Frequency fine-tuning in Class IV flextensional transducers

Class IV flextensional transducers (FTs) are the best-known FTs in literature. These are light-weight projectors (compared to the conventional Tonpilz designs) with capability for high power delivery at low frequencies. The resonance frequencies of this type of transducers are known to be dominantly dependent on the characteristics of the outer shell than on the driver stack. Consequently, the method of achieving fine-tuning of the transducer by modifying the characteristics of the stack, as practiced in the case of Tonpilz designs, is not very effective. This paper describes a method for fine-tuning of the frequency of a Class IV FT, which involves only a modification of a pair of small components used for coupling the stack to the transducer. The effectiveness of the method is examined by finite element modelling using the package ATILA, in the case of a 3 kHz aluminium shell transducer. Experimental results are also presented.     

The chromatographic properties of a mixed-bed stationary phase combining reversed-phase and strong anion exchange properties

Summary The feasibility of using columns prepared by mixing together ion exchange and reversed-phase packing materials, for the simultaneous separation of ionised and unionised molecules, has been examined using a range of test solutes. Columns prepared in this way showed chromatographic properties which were intermediate between those of the individual phases. The dual nature of the retention mechanism allowed the retention of ionisable molecules to be adjusted using pH whilst that of uncharged compounds was unaffected. The simultaneous chromatography of model compounds and their glucuronide, sulphate and glycine conjugates, under a variety of conditions, was demonstrated.     

混合模式硅胶基质毛细管电色谱整体柱的制备及其电色谱性能研究

采用温和条件下的溶胶-凝胶技术，成功制备了阴离子交换-反相混合模式硅胶基质毛细管电色谱整体柱。通过调整反应液中不同前体的比例，优化了整体柱的制备条件。通过扫瞄电镜，对柱床进行了表征和分析。实验发现，所制备的整体柱电渗流的方向和大小可随流动相pH值的改变而改变，在酸性和中性条件下，具有从阴极流向阳极的电渗流；当流动相pH值升至约7．5时，电渗流方向发生了反转（由阳极流向阴极）。在优化的实验条件下，用所制备的整体柱对所考察的酸性（中性）化合物实现了快速分离，并获得了高达160，000N／m的柱效。     

Application of scaled boundary finite element method in static and dynamic fracture problems

The scaled boundary finite element method (SBFEM) is a recently developed numerical method combining advantages of both finite element methods (FEM) and boundary element methods (BEM) and with its own special features as well. One of the most prominent advantages is its capability of calculating stress intensity factors (SIFs) directly from the stress solutions whose singularities at crack tips are analytically represented. This advantage is taken in this study to model static and dynamic fracture problems. For static problems, a remeshing algorithm as simple as used in the BEM is developed while retaining the generality and flexibility of the FEM. Fully-automatic modelling of the mixed-mode crack propagation is then realised by combining the remeshing algorithm with a propagation criterion. For dynamic fracture problems, a newly developed series-increasing solution to the SBFEM governing equations in the frequency domain is applied to calculate dynamic SIFs. Three plane problems are modelled. The numerical results show that the SBFEM can accurately predict static and dynamic SIFs, cracking paths and load-displacement curves, using only a fraction of degrees of freedom generally needed by the traditional finite element methods.The project supported by the National Natural Science Foundation of China (50579081) and the Australian Research Council (DP0452681)The English text was polished by Keren Wang.     

HIGH-FREQUENCY VIBRATIONS OF CORRUGATED CYLINDRICAL PIEZOELECTRIC SHELLS

Coupled extensional and flexural cylindrical vibrations of a corrugated cylindrical piezoelectric shell consisting of multiple pieces of circular cylindrical surfaces smoothly connected along their generatrix are studied. To validate the results for the case of relatively thick shells or equivalently high-frequency modes with short wavelengths, existing analysis is extended by considering shear deformation and rotatory inertia. An analytical solution is obtained. Based on the solution, resonant frequencies and mode shapes are calculated.     

800Hz Terfenol-D鱼唇式弯张换能器

本文研制了800Hz Terfenol-D鱼唇式弯张换能器，换能器设计中采用永磁偏磁场和能有效抑制涡流损耗的闭合磁路结构，最高声源级185dB，-3dB带宽180Hz,这种鱼唇工弯张换能器克服了连续直流提供偏磁场时发热强的缺点，并且仅需要普通的功率放大器，更适于长时间连续工作，使这一新型低频大功率水声换能器趋于实用化。     

爆电换能脉冲大电流输出研究

 基于爆电换能原理,使用掺铌的PZT 95/5陶瓷组装换能器件,在垂直工作模式下,对爆电电源LRC电路响应进行了理论分析,并开展了脉冲大电流输出实验研究。实验采用多组PZT 95/5铁电陶瓷并联,利用平面波发生器作为冲击加载手段,获得了峰值5 kA以上的脉冲大电流,初始电流上升速率可达10~20 GA/s。实验结果与理论设计符合较好。     

夹心式压电换能器的谐振频率跟踪方案设计

分析了夹心式压电换能器的阻抗特性,讨论了基于相位方式的现有跟踪方案的不足,提出了一种新的频率跟踪方案,介绍了实现该方案的电路系统。该方案的特点是:采用先扫频后跟踪的策略,解决了频率范围设定难的问题;增加解锁控制,使得系统在死锁或误跟踪时自动回到频率搜索状态;采用直接数字合成器(DDS)作为频率调整和信号产生的器件,实现了全数字系统,调整方便,精度高;采用复杂可编程逻辑器件(CPLD)做相位比较和DDS控制,使频率跟踪速度快,并且跟踪精度和速度均可控制。     

Design of interdigital transducers for crack detection in plates

Interdigital transducers (IDT) for non-destructive evaluation (NDE) of cracks in plates are designed based on an analytical model established previously. Key considerations include mode selectivity, excitation strength, collimation of wave and cost. The advantage of mode selectivity of IDT over PZT patch is presented both analytically and experimentally. Effects of parameters, namely finger spacing, width, length, number of fingers, and the size of IDT, on the excitation strength and mode selectivity are considered. This led to the design of a mobile double-sided IDT as an efficient device where excitation strength is strong and focused. The device was fabricated in-house using commercially available piezoelectric ceramics and used to develop a procedure for accurate identification of the direction and extent of cracks in plates. Three aluminum plates, one with a linear deep crack, another with a piecewise linear shallower crack and the third with a curved crack, were used to illustrate the accuracy and efficiency of both the proposed device and procedure for effective NDE.