Biosynthesis of zinc oxide nanoparticles using Euphorbia milii leaf constituents: Characterization and improved photocatalytic degradation of methylene blue dye under natural sunlight

A facile biosynthesis route was followed to prepare zinc oxide nanoparticles (ZnO NPs) using Euphorbia milii (E. milii) leaf constituents. The SEM images exhibited presence of spherical ZnO NPs and the corresponding TEM images disclosed monodisperse nature of the ZnO NPs with diameter ranges between 12 and 20 nm. The Brunauer–Emmett–Teller (BET) analysis revealed that the ZnO NPs have specific surface area of 20.46 m²/g with pore diameter of 2 nm–10 nm and pore volume of 0.908 cm³/g. The EDAX spectrum exemplified the existence of Zn and O elements and non-appearance of impurities that confirmed pristine nature of the ZnO NPs. The XRD pattern indicated crystalline peaks corresponding to hexagonal wurtzite structured ZnO with an average crystallite size of 16.11 nm. The FTIR spectrum displayed strong absorption bands at 512 and 534 cm^?1 related to ZnO. The photocatalytic action of ZnO NPs exhibited noteworthy degradation of methylene blue dye under natural sunlight illumination. The maximum degradation efficiency achieved was 98.17% at an illumination period of 50 min. The reusability study proved considerable photostability of the ZnO NPs during photocatalytic experiments. These findings suggest that the E. milii leaf constituents can be utilized as suitable biological source to synthesis ZnO NPs for photocatalytic applications.     

Hybrid cyclotriphosphazene–polysiloxane–nano-SiO2 composites with improved mechanical properties

Starting from the functional cyclotriphosphazene, polysiloxane and nano-SiO₂ precursors, three new hybrid nanocomposites with reinforced mechanical properties were prepared. Young’s modulus values for all the composite samples are similar in the range of 7–11 MPa, stress at fracture increases with the nano-SiO₂ content increase in the material and reaches a maximum value of 36 MPa for the composite with 20% nano-SiO₂. The nanocomposites investigated are elastic and demonstrate the ability to be deformed without failure up to 54% strain.     

Alkaline oxygen evolution: exploring synergy between fcc and hcp cobalt nanoparticles entrapped in N-doped graphene

Herein, we report a Mott-Schottky catalyst by entrapping cobalt nanoparticles inside the N-doped graphene shell (Co@NC). The Co@NC delivered excellent oxygen evolution activity with an overpotential of merely 248 mV at a current density of 10 mA cm^–2 with promising long-term stability. The importance of Co encapsulated in NC has further been demonstrated by synthesizing Co nanoparticles without NC shell. The synergy between the hexagonal close-packed (hcp) and face-centered cubic (fcc) Co plays a major role to improve the OER activity, whereas the NC shell optimizes the electronic structure, improves the electron conductivity, and offers a large number of active sites in Co@NC. The density functional theory calculations have revealed that the hcp Co has a dominant role in the surface reaction of electrocatalytic oxygen evolution, whereas the fcc phase induces the built-in electric field at the interfaces with N-doped graphene to accelerate the H⁺ ion transport.     

Sonocatalytic degradation of EDTA in the presence of Ti and Ti@TiO2 nanoparticles

The sonocatalytic degradation of EDTA (C₀ = 5 10⁻³ M) in aqueous solutions was studied under 345 kHz (P_ac = 0.25 W mL⁻¹) ultrasound at 22–51 °C, Ar/20%O₂, Ar or air, and in the presence of metallic titanium (Ti⁰) or core-shell Ti@TiO₂ nanoparticles (NPs). Ti@TiO₂ NPs have been obtained using simultaneous action of hydrothermal conditions (100–214 °C, autogenic pressure P = 1.0–19.0 bar) and 20 kHz ultrasound, called sonohydrothermal (SHT) treatment, on Ti⁰ NPs in pure water. Ti⁰ is composed of quasi-spherical particles (30–150 nm) of metallic titanium coated with a metastable titanium suboxide Ti₃O. SHT treatment at 150–214 °C leads to the oxidation of Ti₃O and partial oxidation of Ti⁰ and formation of nanocrystalline shell (10–20 nm) composed of TiO₂ anatase. It was found that Ti⁰ NPs do not exhibit catalytic activity in the absence of ultrasound. Moreover, Ti⁰ NPs remain inactive under ultrasound in the absence of oxygen. However, significant acceleration of EDTA degradation was achieved during sonication in the presence of Ti⁰ NPs and Ar/20%O₂ gas mixture. Coating of Ti⁰ with TiO₂ nanocrystalline shell reduces sonocatalytic activity. Pristine TiO₂ anatase nanoparticles do not show a sonocatalytic activity in studied system. Suggested mechanism of EDTA sonocatalytic degradation involves two reaction pathways: (i) sonochemical oxidation of EDTA by OH/HO₂ radicals in solution and (ii) EDTA oxidation at the surface of Ti⁰ NPs in the presence of oxygen activated by cavitation event. Ultrasonic activation most probably occurs due to the local heating of Ti⁰/O₂ species at cavitation bubble/solution interface.     

Nephroprotective properties of chitosan/sodium lignosulfonate/Au nanoparticles in streptozotocin-induced nephropathy in mice: Introducing a novel therapeutic drug for the treatment of nephropathy

In this study, we report the green synthesis of nontoxic, stable, and small size gold nanoparticle by using chitosan/sodium lignosulfonate hydrogel with capping/reducing ability for the synthesis of CS/NaLS/Au NPs. The prepared bio-nanocomposite were characterized by advanced physicochemical techniques like Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), Energy Dispersive X-ray spectroscopy (EDX) and X-ray Diffraction (XRD) study. It has been established that CS/NaLS/Au NPs have a spherical shape with a mean diameter from 20 to 30 nm. Diabetes was induced by administration of 60 mg/kg of streptozotocin (STZ) intraperitoneally in 100 mature male mice and they were randomly divided into 5 groups. The negative control group received normal saline and treatment groups received glibenclamide with dose 0.5 mg/kg and 10 and 40 μg/kg of CS/NaLS/Au NPs through gavage for 50 days. In addition, one group considered as positive control (in treated-diabetic). On the last day, serum levels of samples blood glucose, urea and creatinine were measured. After tissue processing, 5 μm sections of the kidneys were prepared and they were stained by periodic acid Schiff (PAS) and used for stereological analysis. In the antioxidant test, the IC50 of CS/NaLS/Au NPs and BHT against DPPH free radicals were 117 and 86 µg/mL, respectively. In the cellular and molecular part of the recent study, the treated cells with CS/NaLS/Au NPs were assessed by MTT assay for 48 h about the cytotoxicity properties on normal (HUVEC) cell line. The increased levels of blood glucose and urea were decreased (p < 0.05) significantly in CS/NaLS/Au NPs-treated groups as compared to the untreated diabetic. The kidney weight, kidney volume (Volume of cortex, medulla, glomerulus, proximal and distal tubules, collecting ducts, loop of Henle, interstitial tissues, and vessels) and kidney structures length (length of proximal and distal tubules, collecting ducts, loop of Henle, and vessels) decreased significantly (p < 0.05) after treatment with high dose of CS/NaLS/Au NPs (p < 0.05). According to the obtained results, CS/NaLS/Au NPs can regulates the levels of blood glucose and urea and inhibits from kidney damages in STZ-induced diabetic mice. This study suggested CS/NaLS/Au NPs as an antidiabetic and nephroprotective drug in the developing countries.     

Electrolyte Effects on the Electrocatalytic Performance of Iridium-Based Nanoparticles for Oxygen Evolution in Rotating Disc Electrodes

Proton exchange membrane water electrolysers are very promising renewable energy conversion devices that produce hydrogen from sustainable feedstocks. These devices are mainly limited by the sluggish kinetics of the oxygen evolution reaction (OER). Ir-based nanoparticles are both reasonably active and stable for the OER in acidic media. The electrolyte composition and the pH may play a crucial role in electrocatalysis, yet they have been widely overlooked for the OER. Herein, we present a study on the effects of the composition and concentration of the electrolyte on commercial Ir black nanoparticles using concentrations of 0.05 M, 0.1 M and 0.5 M of both sulphuric and perchloric acid. The results show an important effect of the electrolyte composition on the catalytic performance of the Ir nanoparticles. The concentration of H₂SO₄ interferes on the oxidation of Ir and decreases the catalytic performance of the catalyst. HClO₄ does not show strong interferences in the electrochemistry of Ir. Higher catalytic performances are observed in HClO₄ electrolytes in comparison to H₂SO₄ with little effect of the concentration of HClO₄.     

Aptamer functionalized magnetic graphene oxide nanocomposites for highly selective capture of histones

The binding coverage of aptamer was an important restricted factor for aptamer‐based affinity enrichment strategy for capturing target molecules. Herein, we designed and prepared aptamer functionalized graphene oxide based nanocomposites (GO/NH₂‐NTA/Fe₃O₄/PEI/Au), and the coverage density of aptamer was high to 33.1 nmol/mg. The high aptamer coverage density was contributed to the large surface area of graphene oxide. The successive modification of Nα,Nα‐Bis(carboxymethyl)‐L‐lysine, magnetic nanoparticles, polyethylenimine, and Au nanoparticles ensured the histone purification with fast speed and high purity. Histones could be captured rapidly and specifically from nucleoproteins by our aptamer based purification strategy, while traditional acid‐extraction could not specifically enrich histones. Compared with traditional acid‐extraction method, rapid and efficient discovery of histones and their post‐translational modifications, such as several kinds of methylation at H3.1K9 and H3.1K27, were achieved confidently. It demonstrated that our aptamer functionalized magnetic graphene oxide nanocomposites have a great potential for histone analysis.     

Possible Routes for Efficient Thermo-Electric Energy Conversion in a Molecular Junction

In the context of designing an efficient thermoelectric energy-conversion device at nanoscale level, we suggest several important tuning parameters to enhance the performance of thermoelectric converters. We consider a simple molecular junction, which is always helpful to understand the basic mechanisms in a deeper way, where a benzene molecule is coupled to two external baths having unequal temperatures. The key component responsible for achieving better performance is associated with the asymmetric nature of transmission function, and in the present work, we show that it can be implemented in different ways by regulating the physical parameters involving the system. Employing a tight-binding framework we calculate electrical and thermal conductances, thermopower, and figure of merit (FOM) by using Landauer integrals, and thoroughly examine the critical roles played by molecule-to-lead (ML) interface geometry, magnetic field, chemical substituent group, ML coupling, and the direct coupling between the two leads. Our results show that a reasonably large FOM (≫1) can be obtained and lead to a possibility of regulating the efficiency by selectively tuning the physical parameters. We believe that the present analysis will enhance the understanding of designing efficient thermoelectric devices, and can be verified in a laboratory.     

Synthesis of mesoporous-silica coated multi-branched gold nanoparticles for surface enhanced Raman scattering evaluation of 4-bromomethcathinone

Mesoporous silica-coated multi-branched gold nanoparticles (bAu@mesoSiO₂) aiming for enhanced Raman sensing for 4-bromomethcathinone (4-BMC) detection is reported. In this work, we present an effective strategy to probe the Raman signal of 4-MBC. Morphologies and optical properties of the synthesized materials with different [Au³⁺]/[Au⁰] ratios are characterized utilizing transmission electron microscopy (TEM), UV–vis and mid-infrared spectroscopy. Both experimental and theoretical (simulation) studies were investigated. Taking advantages of gold core branches that provide highly localized and strongly enhanced electromagnetic fields due to plasmon resonance, surface-enhanced Raman scattering (SERS) is observed. The experimental results show that the SERS intensity exhibits a 100-fold increase with the increased average length and quantity of gold branches (nano tips). The analytical performance yielded a detection limit of 0.1?mg/ml for the 4-MBC target within 5?mins. The sensing method will likely find further improvement and broad use in the forensic science. Besides rapid detection and portability, the combination of the Raman effect and enhanced materials imparts other notable advantages, such as its non-contact and free of reagents.