首页 | 本学科首页   官方微博 | 高级检索  
文章检索
  按 检索   检索词:      
出版年份:   被引次数:   他引次数: 提示:输入*表示无穷大
  收费全文   3816篇
  免费   427篇
  国内免费   433篇
化学   1187篇
晶体学   27篇
力学   305篇
综合类   54篇
数学   630篇
物理学   2473篇
  2024年   2篇
  2023年   56篇
  2022年   71篇
  2021年   73篇
  2020年   99篇
  2019年   86篇
  2018年   80篇
  2017年   128篇
  2016年   139篇
  2015年   116篇
  2014年   166篇
  2013年   226篇
  2012年   177篇
  2011年   246篇
  2010年   207篇
  2009年   233篇
  2008年   212篇
  2007年   292篇
  2006年   290篇
  2005年   231篇
  2004年   194篇
  2003年   211篇
  2002年   155篇
  2001年   168篇
  2000年   129篇
  1999年   106篇
  1998年   119篇
  1997年   98篇
  1996年   93篇
  1995年   62篇
  1994年   38篇
  1993年   19篇
  1992年   19篇
  1991年   23篇
  1990年   15篇
  1989年   13篇
  1988年   11篇
  1987年   4篇
  1986年   3篇
  1985年   8篇
  1984年   11篇
  1983年   4篇
  1982年   5篇
  1981年   12篇
  1980年   5篇
  1979年   8篇
  1978年   7篇
  1977年   2篇
  1976年   3篇
  1959年   1篇
排序方式: 共有4676条查询结果,搜索用时 15 毫秒
1.
利用微环谐振腔阵列进行光码分多址编解码过程中,微环谐振腔反射谱的自由频谱宽度(FSR)范围制约该系统用户容量的提升.本文提出了一种新型的基于游标效应的串联哑铃型微环谐振腔光编解码器.利用Matlab建立了半径分别为40μm-30μm-40μm的哑铃型微环谐振腔光编解码器模型.详细分析了光反射谱伪模抑制与耦合系数的关系,研究了耦合系数、码片速率对串联哑铃型微环谐振腔光编解码器性能的影响.结果表明,与半径分别为40μm-40μm-40μm的传统串联微环谐振腔编解码器相比,哑铃型微腔编解码器FSR值扩大了4倍.理想情况下,用户容量可呈指数增长.同时,互相关峰值比(P/W)与自相关峰值旁瓣比(P/C)分别提高了约33%和8%.  相似文献   
2.
A new approach for tree-level amplitudes with multiple fermion lines is presented. It primarily focuses on the simplification of fermion lines. By calculating two vectors recursively without any matrix multiplications, the result of a fermion line is reduced to a very compact form depending only on the two vectors. Comparisons with other packages are presented, and the results show that our package FDC provides a very good performance in the processes of multiple fermion lines with this new approach and some other improvements. A further comparison with WHIZARD shows that this new approach has a competitive efficiency in computing pure amplitude squares without phase space integration.  相似文献   
3.
上转换发光是一种将长波长的激发光转化为短波长发射的反斯托克斯发光现象,三线态-三线态湮灭上转换(TTA-UC)能够在较低密度能量下被激发,且上转换量子产率高,因此获得研究者们广泛关注。关于敏化剂分子结构与上转换发光性能相关性的研究一直是TTA-UC研究领域的重要热点,选择两种代表性的卟啉钯光敏剂[PdOEP-八乙基卟啉钯(Ⅱ)和PdBrTPP-四溴苯基卟啉钯(Ⅱ)]与蒽衍生物9,10-(4-羟甲基)苯基蒽p-DHMPA发光剂组合上转换体系作为研究模型,通过一系列合成工作获得材料分子后,进一步比较两种敏化剂的光谱性质与体系最终上转换性能之间关系。通过细致研究敏化剂和发光剂的荧光发射和寿命等光谱性质对敏化剂系间窜越,三线态-三线态能量转移及三线态-三线态湮灭等能量传递过程的影响后,发现在532 nm处的摩尔吸光系数PdBrTPP (10.8 cm-1·mmol-1)大于PdOEP (3.0 cm-1·mmol-1);三线态寿命PdBrTPP (173.13 μs)大于PdOEP (109.21 μs)。但与p-DHMPA配对时光敏剂与发光剂的三线态能级差ΔETT,PdOEP (0.140 eV)却高于PdBrTPP (0.062 eV),通过Stern-Volmer方程得到Stern-Volmer猝灭常数KSV和双分子猝灭常数kq值也是PdOEP略高,最终表现出上转换阈值PdOEP/p-DHMPA (22.40 mW·cm-2)小于PdBrTPP/p-DHMPA (29.78 mW·cm-2),上转换发光效率ΦUC,PdOEP/p-DHMPA (28.3%)大于PdBrTPP/p-DHMPA (26.8%)。因此,卟啉钯敏化剂的构效对三重态湮灭上转换发光效率影响最为重要的决定因素是敏化剂三线态高低。对于不同的敏化剂,在分子主体结构、摩尔吸光系数与三线态寿命等光谱参数差别不大的情况下,敏化剂的三线态能级越高,就将会具有更大的上转换发光效率。然而如果以总上转换能力指标来评价,PdBrTPP的共轭结构能够提升其在激发波长处吸收更多光子的能力,具有比PdOEP更高的摩尔吸光系数,造成其总上转换能力η比PdOEP高3.4倍。因此从上转换总效能指标来评价,通过敏化剂分子设计调控其在激发光波长处的摩尔吸光系数也不失为一种简单易行的方法。  相似文献   
4.
The complex nature of filling factor ν = 0 of monolayer graphene is studied in magnetotransport experiments. As a function of perpendicular magnetic field a metal-insulator transition is observed, which is attributed to disorder-induced Landau level broadening in the canted antiferromagnetic phase. In the metallic regime a separation of the zeroth Landau level appears and signs of the quantum spin Hall effect are seen near ν = 0. In addition to local transport, nonlocal transport experiments show results being consistent with helical edge transport.  相似文献   
5.
主要研究了两类近似凸集的关系和性质.首先,举例说明两类近似凸集没有相互包含关系.其次,在近似凸集(nearly convex)条件下,证明了在一定条件下函数上图是近似凸集与凸集的等价关系.同时,考虑了近似凸函数与函数上图是近似凸集的等价刻画、近似凸函数与函数水平集是近似凸集的必要性,并用例子说明近似凸函数与函数水平集是近似凸集的充分性不成立.最后,基于近似凸函数和拟凸函数的概念,给出了近似拟凸函数的概念并研究了近似拟凸函数与水平集是近似凸集的等价刻画.  相似文献   
6.
Pt0被认为是NO氧化的活性物种,而催化剂的制备方法对活性物种的含量起着决定性作用。本文采用非惰性气氛保护的改性醇还原-浸渍法(MARI)合成了高分散高Pt0含量的1% (w, 质量分数) Pt/SiO2-Al2O3催化剂(MA-Pt/SA)。X射线粉末衍射(XRD)、CO-漫反射傅里叶变换红外吸收光谱(CO-DRIFTS)和透射电镜(TEM)表征证实在550 ℃焙烧3 h后催化剂的Pt颗粒仅有3.8 nm。同时,X射线光电子能谱(XPS)和H2-程序升温还原(H2-TPR)结果表明催化剂具有高Pt0含量(60.3%)。模拟柴油车尾气气氛进行活性测试,并与传统浸渍法制备的1% (w) Pt/SiO2-Al2O3催化剂(C-Pt/SA)对比,结果显示MA-Pt/SA具有优异的催化氧化性能,其NO最大转化率高达74%,比C-Pt/SA的NO转化率高了23%。经670 ℃高温老化15 h后,老化的MA-Pt/SA的NO转化率仍然高达69%。此外NO + O2共吸附原位漫反射傅里叶变换红外吸收光谱(in situ DRIFTS of NO + O2 co-adsorption)表明高的Pt分散度和高Pt0含量能够促进中间物种桥式硝酸盐的生成及分解,进而导致了优异的NO氧化活性。最后,利用同样方法将Pt的负载量降低至0.5% (w)制备催化剂,NO转化率仍达64%。这种制备方法能够获得低贵金属高性能的Pt基催化剂。  相似文献   
7.
胡文伟  王蕊  赵晖  张力 《爆炸与冲击》2022,42(2):023102-1-023102-11
为研究火灾高温与撞击联合作用下钢管混凝土柱的力学性能,基于ABAQUS建立了高温作用下考虑轴力影响的钢管混凝土柱侧向撞击有限元模型。首先,对高温与撞击联合作用下考虑轴力影响的钢管混凝土柱的破坏模式与受力全过程进行了分析,探讨了高温下钢管混凝土柱的抗撞性能与工作机理;其次,重点研究了受火时间、材料强度、含钢率以及撞击能量对抗撞性能的影响,并给出了相关设计建议。研究结果表明:高温与撞击联合作用下,钢管混凝土柱主要发生受弯破坏;受火15 min后,构件抗撞性能明显降低。轴压力对构件抗撞性能产生不利影响,轴压比从0增加到0.2,受火60 min构件抗撞性能下降了7.8%;混凝土强度对高温下钢管混凝土柱抗撞性能有显著影响,受火90 min后,混凝土强度由30 MPa增加到50 MPa,构件抗撞性能提高约85%;外钢管强度与含钢率对高温下抗撞性能影响不大。  相似文献   
8.
Famin Yu 《中国物理 B》2022,31(12):128107-128107
Constructing specific structures from the bottom up with artificial units is an important interdisciplinary topic involving physics, chemistry, materials, and so on. In this work, we theoretically demonstrated the feasibility of using superatoms as building blocks to assemble a complex at atomic-level precision. By using a series of actinide-based endohedral metallofullerene (EMF) superatoms that can form one, two, three and four chemical bonds, a planar complex with intra- and inter-molecular interactions was assembled on the Au(111) surface. This complex is composed of two parts, containing ten and eight superatoms, respectively. The electronic structure analysis shows that the electron density inside each part is connected and the closed-shell electronic arrangement system is designed. There is also an obvious van der Waals boundary by physical adsorption between the two parts, and a stable complex is formed. Since this complex is realized by the first-principles calculations of quantum mechanics, our results help not only achieve atomic-level precision construction with artificial superatomic units but also maintain atomic-level functional properties.  相似文献   
9.
Herein, we reported the fabrication of porous iron oxide/carbon black (P–Fe2O3/CB) composite through a two-step engineering method. At first, Prussian blue microcubes were used as a precursor and further calcined to form P–Fe2O3 microcubes. The intercalation of CB nanoparticles with P–Fe2O3 nanocubes was processed through the ultrasonication method. The obtained P–Fe2O3/CB were successfully scrutinized through various physiochemical characterization methods. The proposed P–Fe2O3/CB-modified glassy carbon electrode sensor was successfully implemented in the electrochemical sensing of chlorpromazine hydrochloride due to its very low charge transfer resistance (Rct) compared to the other electrode modifiers. The sensitive detection of CPMH through differential pulse voltammetry exemplifies an excellent electroanalytical performance such as a wide linear range of 0.5–1472 μM, a lower detection limit (0.001 μM), and an appraisable sensitivity of 1.99 μA/μM cm?2 due to its availability of a high number of active sites and its large surface area, respectively. It also expresses excellent selectivity, repeatability, reproducibility, and stability results. Moreover, the practical feasibility of the as-fabricated P–Fe2O3/CB/glassy carbon electrode sensor shows exquisite recovery (98.1–100.8%) results with an appraisable current response in various biological, pharmaceutical, and environmental samples.  相似文献   
10.
Aldehydes are important compounds in a large number of samples, especially food and beverages. In this work, for the first time, cyclohexane‐1,3‐dione (CHD) was used as a derivatizing reagent aiming aldehyde (formaldehyde, acetaldehyde, propionaldehyde, and valeraldehyde) analysis by MEKC‐DAD. The optimized separation of the derivates was performed using a voltage program (+20 kV, 0–15 min.; +23 kV, 15–17 min.) at a temperature of 26°C, and using as the running buffer a mixture containing 100 mmol/L of sodium dodecyl sulfate and 29 mmol/L of sodium tetraborate at pH 9.2, with maximum absorbance at 260 nm. CHD was compared with two other derivatizing agents: 3‐methyl‐2‐benzothiazolinone hydrazone and phenylhydrazine‐4‐sulfonic acid. The CHD‐aldehyde derivatives were also characterized by LC‐MS. The calibration curves for all aldehydes had r2 above 0.999 and LODs ranged from 0.01 to 0.7 mg/L. The optimized methodology was applied in sugar cane brandy (cachaça) samples successfully. CHD showed to be an alternative derivatization reagent due to its stability, aqueous solubility, high selectivity and sensitivity, reduced impurities, and simple preparation steps.  相似文献   
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号