Dynamics of laser-induced cavitation bubble during expansion over sharp-edge geometry submerged in liquid – an inside view by diffuse illumination

Laser ablation in liquids is growing in popularity for various applications including nanoparticle production, breakdown spectroscopy, and surface functionalization. When laser pulse ablates the solid target submerged in liquid, a cavitation bubble develops. In case of “finite” geometries of ablated solids, liquid dynamical phenomena can occur inside the bubble when the bubble overflows the surface edge. To observe this dynamics, we use diffuse illumination of a flashlamp in combination with a high-speed videography by exposure times down to 250 ns. The developed theoretical modelling and its comparison with the experimental observations clearly prove that this approach widens the observable area inside the bubble. We thereby use it to study the dynamics of laser-induced cavitation bubble during its expansion over a sharp-edge (“cliff-like” 90°) geometry submerged in water, ethanol, and polyethylene glycol 300. The samples are 17 mm wide stainless steel plates with thickness in the range of 0.025–2 mm. Bubbles are induced on the samples by 1064-nm laser pulses with pulse durations of 7–60 ns and pulse energies of 10–55 mJ. We observe formation of a fixed-type secondary cavity behind the edge where low-pressure area develops due to bubble-driven flow of the liquid. This occurs when the velocity of liquid overflow exceeds ~20 m s⁻¹. A re-entrant liquid injection with up to ~40 m s⁻¹ velocity may occur inside the bubble when the bubble overflows the edge of the sample. Formation and characteristics of the jet evidently depend on the relation between the breakdown-edge offset and the bubble energy, as well as the properties of the surrounding liquid. Higher viscosity of the liquid prevents the generation of the jet.     

Ionic liquid-functional MCM-41 as a high effective catalyst for the synthesis of isatylidene malononitrile via Knoevenagel condensation

Ionic liquid functional MCM-41 was synthesized, characterized and used as heterogeneous catalyst for the Knoevenagel condensation of isatins with malononitrile. A series of corresponding isatylidene malononitrile were obtained in high isolated yield (96–99%) at room temperature in a short time. The heterogeneous catalyst can be easily recovered by centrifugation and showed almost no loss of activity over 10 recycle experiments. At the same time, the gram-scale experiments showed excellent yields and provided a highly effective method for scale up applications.     

多孔离子液体的构筑及应用

多孔液体(Porous Liquids, PLs)是一类结合了多孔固体永久性孔隙与液态流动性优势的新材料. 自2007年, PLs的概念被首次提出以来, 其在合成策略与应用领域方面均取得了较大的突破. 然而, 传统的PLs因高黏度、高密度、高熔点与高原材料成本等缺陷极大程度制约了其在流动工业系统中的大规模应用. 因此, 迫切需要寻求理想的位阻溶剂用于制备先进的多孔液体. 离子液体(Ionic Liquids, ILs)因独特的可调节物理特性、非挥发性、高稳定性、易获得、经济性高、低再生能耗等特性, 使其成为构筑PLs中最具有应用前景的理想溶剂之一. 在过去的5年间, 基于多种ILs与先进多孔固体(如有机笼、金属有机框架、中空碳、沸石、多孔聚合物等)制备的多孔离子液体(Porous Ionic Liquids, PILs)被陆续报道. PILs独特的永久性孔隙、无溶剂挥发、再生能力强、黏度可调、低熔点、高稳定性等特性加快了其在气体吸附、分离、催化、萃取、分子分离等领域的快速发展. 本综述围绕PILs的构筑策略、特性、应用领域等阐述了其研究进展. 最后, 对PILs在制备中存在的挑战与未来的研究方向进行了归纳与展望.     

“Through-Space” Relativistic Effects on NMR Chemical Shifts of Pyridinium Halide Ionic Liquids

We have investigated, using two-component relativistic density functional theory (DFT) at ZORA-SO-BP86 and ZORA-SO-PBE0 level, the occurrence of relativistic effects on the ¹H, ¹³C, and ¹⁵N NMR chemical shifts of 1-methylpyridinium halides [MP][X] and 1-butyl-3-methylpyridinium trihalides [BMP][X₃] ionic liquids (ILs) (X=Cl, Br, I) as a result of a non-covalent interaction with the heavy anions. Our results indicate a sizeable deshielding effect in ion pairs when the anion is I⁻ and I₃⁻. A smaller, though nonzero, effect is observed also with bromine while chlorine based anions do not produce an appreciable relativistic shift. The chemical shift of the carbon atoms of the aromatic ring shows an inverse halogen dependence that has been rationalized based on the little C-2s orbital contribution to the σ-type interaction between the cation and anion. This is the first detailed account and systematic theoretical investigation of a relativistic heavy atom effect on the NMR chemical shifts of light atoms in the absence of covalent bonds. Our work paves the way and suggests the direction for an experimental investigation of such elusive signatures of ion pairing in ILs.     

Eutectic Molecular Liquids Based on Hydrogen Bonding and π–π Interaction for Exfoliating Two‐dimensional Materials and Recycling Polymers

Eutectic molecular liquids (EMLs) based on hydrogen‐bonding interaction and π–π stacking were prepared. We found that the thermodynamic properties like initial decomposition temperature and glass transition temperature of EMLs are mainly dominated by the hydrogen bond donor, which is beneficial for designing and preparing new EMLs. These new liquid systems could be applied in the field of environmental and material science.     

Ideal‐filter capillary electrophoresis: A highly efficient partitioning method for selection of protein binders from oligonucleotide libraries

Selection of affinity ligands for protein targets from oligonucleotide libraries currently involves multiple rounds of alternating steps of partitioning of protein‐bound oligonucleotides (binders) from protein‐unbound oligonucleotides (nonbinders). We have recently introduced ideal‐filter capillary electrophoresis (IFCE) for binder selection in a single step of partitioning. In IFCE, protein‐binder complexes and nonbinders move inside the capillary in the opposite directions, and the efficiency of their partitioning reaches 10⁹, i.e., only one of a billion molecules of nonbinders leaks through IFCE while all binders pass through. The condition of IFCE can be satisfied when the magnitude of the mobility of EOF is smaller than that of the protein‐binder complexes and larger than that of nonbinders. The efficiency of partitioning in IFCE is 10 million times higher than those of solid‐phase‐based methods of partitioning typically used in selection of affinity ligands for protein targets from oligonucleotide libraries. Here, we provide additional details on our justification for IFCE development. We elaborate on electrophoretic aspects of the method and define the theoretical range of EOF mobilities that support IFCE. Based on these theoretical results, we identify an experimental range of background electrolyte's ionic strength that supports IFCE. We also extend our interpretation of the results and discuss in‐depth IFCE's prospective in practical applications and fundamental studies.     

Rapid analysis of ultraviolet filters using dispersive liquid–liquid microextraction coupled to headspace gas chromatography and mass spectrometry

An ionic‐liquid‐based in situ dispersive liquid–liquid microextraction method coupled to headspace gas chromatography and mass spectrometry was developed for the rapid analysis of ultraviolet filters. The chemical structures of five ionic liquids were specifically designed to incorporate various functional groups for the favorable extraction of the target analytes. Extraction parameters including ionic liquid mass, molar ratio of ionic liquid to metathesis reagent, vortex time, ionic strength, pH, and total sample volume were studied and optimized. The effect of the headspace temperature and volume during the headspace sampling step was also evaluated to increase the sensitivity of the method. The optimized procedure is fast as it only required ∼7–10 min per extraction and allowed for multiple extractions to be performed simultaneously. In addition, the method exhibited high precision, good linearity, and low limits of detection for six ultraviolet filters in aqueous samples. The developed method was applied to both pool and lake water samples attaining acceptable relative recovery values.     

Characterization of a Novel Intrinsic Luminescent Room‐Temperature Ionic Liquid Based on [P6,6,6,14][ANS]

Intrinsically luminescent room‐temperature ionic liquids (RTILs) can be prepared by combining a luminescent anion (more common) or cation with appropriate counter ions, rendering new luminescent soft materials. These RTILs are still new, and many of their photochemical properties are not well known. A novel intrinsic luminescent RTIL based on the 8‐anilinonaphthalene‐1‐sulfonate ([ANS]) anion combined with the trihexyltetradecylphosphonium ([P_6,6,6,14]) cation was prepared and characterized by spectroscopic techniques. Detailed photophysical studies highlight the influence of the ionic liquid environment on the ANS fluorescence, which together with rheological and ¹H NMR experiments illustrate the effects of both the viscosity and electrostatic interactions between the ions. This material is liquid at room temperature and possesses a glass transition temperature (T_g) of 230.4 K. The fluorescence is not highly sensitive to factors such as temperature, but owing to its high viscosity, dynamic Stokes shift measurements reveal very slow components for the IL relaxation.     

甲基丙烯酸二甲氨基乙酯类离子液体 对Q235钢的缓蚀性能

以甲基丙烯酸二甲氨基乙酯为母体、 对氯甲基苯乙烯为季铵化试剂, 合成了一种具有疏水结构的甲基丙烯酸二甲氨基乙酯型离子液体(DEMA). 通过失重实验、 电化学分析、 原子力显微镜(AFM)、 接触角测试和量子化学计算等研究了DEMA在1 mol/L盐酸中对Q235钢的缓蚀性能, 并揭示了其在Q235钢表面的吸附行为和吸附机理. 失重实验结果表明, DEMA在盐酸中对Q235钢具有优异的缓蚀效果, 且在较高温度(60 ℃)下也能保持高效吸附; 电化学实验结果与失重测试结果一致; 接触角测试结果表明, DEMA可明显增强Q235钢表面的疏水性; 分析热力学参数可知, DEMA在Q235钢表面的吸附为自发、 放热过程, 符合Langmuir等温式, 且以化学吸附为主; 量子化学计算结果证实DEMA的结构中包含大量吸附活性位点.     

Using magnetic core‐shell nanoparticles coated with an ionic liquid dispersion assisted by effervescence powder for the micro‐solid‐phase extraction of four beta blockers from human plasma by ultra high performance liquid chromatography with mass spectrometry detection

In this work, a novel, efficient, and green sorbent, SiO₂@Fe₃O₄ has been created and functionalized with 1‐butyl‐3‐methylimidazolium hexafluorophosphate as an ionic liquid. This sorbent was applied for microextraction of four beta blockers, propranolol, metoprolol, atenolol, and alprenolol with bupivacaine as internal standard from human plasma followed by liquid chromatography with mass spectrometric detection. A mixture of sodium bicarbonate and sodium dihydrogen phosphate was used as an extractant dispersive agent (effervescent power) to enhance the interaction between the magnetic sorbent and analytes. Main affecting parameters on microextraction and elution were optimized. Figures of merit for dispersive solid phase extraction with ionic liquid coated magnetic nanoparticles assisted by effervescent powder were calculated under the optimized conditions. The detection limits for propranolol, metoprolol, atenolol, and alprenolol were found at 0.33, 0.62, 0.03, and 0.44 ng/mL, respectively. For all analytes, good linearity was obtained. Intra‐ (n = 5) and interday (n = 10) precision were both under 6.3% while the preconcentration factors were obtained in the range between 15–18. The extraction efficiencies for each analyte ranged from 75 to 91%. The method was successfully applied for determination of trace amounts of the beta blockers in human plasma samples.