聚变堆相关的液态金属膜流初步实验研究

在磁约束核聚变堆的面对等离子部件设计中,液态金属锂膜流因具有带走杂质、保护面对等离子固壁等优点而被认为是优选方案之一. 然而,如何克服聚变堆中强磁场环境下产生的磁流体力学效应并形成大面积均匀铺展锂膜流动是目前亟需解决的问题.本文通过搭建室温液 态镓铟锡回路和高温液态锂回路,开展了两种不同特性的液态金属膜流实验, 并采用传统可视化方法获得了展向磁场存在时镓铟锡和锂在导电底板形成的液膜流动表面特征.实验结果 表明: 无磁场时,两种液态金属膜流流动表面波动特性与常规流体膜流均一致, 即随着流动雷诺数的增加表面波动变得更为混乱; 而展向磁场存在时,镓铟锡膜流表面波动变得更为规则, 且沿着磁场方向平行排列,表现为拟二维波动的特征; 而锂膜流却产生了明显的磁流体 力学阻力效应,表现为在流动方向局部产生锂滞留现象, 且滞留点随雷诺数增大向下游移动. 最后通过膜流受力分析,进一步阐述了锂膜流受到比镓铟锡膜流更为严重磁流体力学效应影响的原因.      

Synthesis,Structures, and Near‐IR Absorption of Heterole‐Fused Earring Porphyrins

A reaction sequence of regioselective peripheral bromination, Suzuki–Miyaura coupling with 2‐borylated thiophene or pyrrole, and oxidative ring‐closure with FeCl₃ allowed the synthesis of heterole‐fused earring porphyrins 4Pd and 9Pd from the parent earring porphyrin 1 . Differently pyrrole‐fused porphyrins 5H and 6H and their Pd^II complexes 5Pd and 6Pd were also synthesized. The structures of 4Pd , 5H, 6Pd , and 8Pd have been revealed by X‐ray analysis to be slightly twisted owing to constraints imposed by heterole‐fused structures. 5Pd exhibits an intensified band at 1505 nm, while 4Pd and 9Pd display small but remarkably red‐shifted absorption bands reaching around 2200 nm.     

The effect of probe-Ohmic environment coupling type and probe information flow on quantum probing of the cutoff frequency

This work aims to compare results of dissipating and pure dephasing single-qubit probes in characterizing the cutoff frequency of a harmonic reservoir Ohmic spectral density. In particular, we proved that a dissipating single-qubit improves the estimation precision of the cutoff frequency estimator. The information backflow and outflow of the dissipating and the dephasing single-qubit are compared. The relation between the quantum Fisher information and the information outflow and backflow of the probe is obtained. The results show that difference between the values of information outflow and backflow of a dissipating single-qubit is larger than a dephasing single-qubit. So, a single-qubit probe extracts more information from an Ohmic reservoir by increasing the difference between the values of information outflow and backflow of the probe.     

基于荧光多光谱融合的水质化学需氧量的检测

为了对水中的有机污染物进行绿色、快速、准确的检测，提出了一种基于荧光多光谱融合的水质化学需氧量(Chemical Oxygen Demand, COD)的检测方法。实验样本为包含近岸海水和地表水在内的实际水样53份，采用标准化学方法获取样本的化学需氧量的理化值，利用荧光分光光度计采集样本的三维荧光光谱并对光谱数据进行处理和建模。在200～300 nm(间隔5 nm)的激发波长范围内将三维光谱展开成二维的发射光谱(发射波长范围250～500 nm，间隔2 nm)。采用ACO-iPLS(蚁群-区间偏最小二乘)算法提取发射光谱特征，PSO-LSSVM(粒子群优化的最小二乘支持向量机)算法建立预测模型，分别建立了单激发波长下的荧光发射光谱数据预测模型、多激发波长下发射光谱的数据级融合(LLDF)预测模型以及多激发波长下发射光谱的特征级融合(MLDF)预测模型，通过对预测效果的对比，得出结论。实验结果表明，对于不同激发波长下荧光发射光谱数据而言，265 nm激发光作用下的发射谱数据的预测模型最优，其检验集决定系数R2_P和外部检验均方根误差RMSEP分别为0.990 1和1.198 6 mg·L-1；对于荧光多光谱数据级融合模型(简写为：LLDF-PSO-LSSVM)而言，在235，265和290 nm激发光作用下的发射光谱的LLDF模型效果最优，其检验集的R2_ｐ和RMSEP分别为0.992 2和1.055 1 mg·L-1；对于荧光多光谱特征级融合模型(MLDF-PSO-LSSVM)而言，在265，290和305 nm激发光作用下的荧光发射光谱的MLDF模型效果最优，其R2_p=0.998 2，RMSEP=0.534 2 mg·L-1。综合比较各类建模结果可知，MLDF-PSO-LSSVM的模型效果最优，说明基于荧光发射光谱数据，采用多光谱特征级融合模型检测水质COD时，检测的精度更高，预测效果更好。     

蛭石对高钠高钙准东煤结渣特性影响研究

采用一维沉降炉,辅以灰熔点仪的实验方法,将蛭石与高钠高钙准东煤掺混燃烧,研究其对高钠高钙准东煤结渣特性的影响。结果表明,随着蛭石掺烧量的提高,灰熔点温度呈现先降低后升高的趋势,当掺烧量为6%时灰熔点温度最低;蛭石掺烧量越高,高钠高钙准东煤结渣情况改善越明显,当掺烧量达到4%时,渣样变得疏松多孔,质地变脆,渣样与沉积探针之间的黏附性较弱,极易通过吹灰除去,建议蛭石掺烧量为4%;煤灰中原始矿物质以石英、钙铝黄长石或钙黄长石以及辉石类的低熔点矿物质为主,掺烧蛭石后,含钠的绿辉石矿物质被转化为韭闪石,含铁的斜辉石、赤铁矿等矿物质被转化为铁橄榄石,渣样中的矿物质均以高熔点的镁橄榄石为主;蛭石具有固钠的作用,取样温度越低,蛭石掺混量越高,其固钠效果越明显。     

Going Off the Grid: Iterative Model Selection for Biclustered Matrix Completion

We consider the problem of performing matrix completion with side information on row-by-row and column-by-column similarities. We build upon recent proposals for matrix estimation with smoothness constraints with respect to row and column graphs. We present a novel iterative procedure for directly minimizing an information criterion to select an appropriate amount of row and column smoothing, namely, to perform model selection. We also discuss how to exploit the special structure of the problem to scale up the estimation and model selection procedure via the Hutchinson estimator, combined with a stochastic Quasi-Newton approach. Supplementary material for this article is available online.     

一种基于特征分解的图像融合方法

一幅图像可以分解成几何特征不同的纹理部分和卡通部分,基于这两大特征提出了一种图像融合方法.利用卡通和纹理特征的差异,通过学习分别得到卡通字典和纹理字典.在融合过程中,分别利用特定的卡通和纹理字典对源图像的卡通和纹理部分进行融合,融合后的卡通和纹理部分经简单相加得到融合图像.实验结果表明,所提方法是有效的.     

A rapid dissolution procedure to aid initial nuclear forensics investigations of chemically refractory compounds and particles prior to gamma spectrometry

A rapid and effective preparative procedure has been evaluated for the accurate determination of low-energy (40–200 keV) gamma-emitting radionuclides (²¹⁰Pb, ²³⁴Th, ²²⁶Ra, ²³⁵U) in uranium ores and uranium ore concentrates (UOCs) using high-resolution gamma ray spectrometry. The measurement of low-energy gamma photons is complicated in heterogeneous samples containing high-density mineral phases and in such situations activity concentrations will be underestimated. This is because attenuation corrections, calculated based on sample mean density, do not properly correct where dense grains are dispersed within a less dense matrix (analogous to a nugget effect). The current method overcomes these problems using a lithium tetraborate fusion that readily dissolves all components including high-density, self-attenuating minerals/compounds. This is the ideal method for dissolving complex, non-volatile components in soils, rocks, mineral concentrates, and other materials where density reduction is required. Lithium borate fusion avoids the need for theoretical efficiency corrections or measurement of matrix matched calibration standards. The resulting homogeneous quenched glass produced can be quickly dissolved in nitric acid producing low-density solutions that can be counted by gamma spectrometry. The effectiveness of the technique is demonstrated using uranium-bearing Certified Reference Materials and provides accurate activity concentration determinations compared to the underestimated activity concentrations derived from direct measurements of a bulk sample. The procedure offers an effective solution for initial nuclear forensic studies where complex refractory minerals or matrices exist. It is also significantly faster, safer and simpler than alternative approaches.     

激光惯性约束聚变靶制备技术研究进展

在实验室实现聚变反应释放的能量大于点燃聚变反应所需能量的阈值是当今世界ICF研究的主要目标,实现这一目标仍需要深入研究一系列的关键物理问题。在ICF研究中,制靶能力的发展与提升至关重要,靶的质量是实验成功的核心要素之一。本文介绍了国际ICF靶制备工作近年来在新型烧蚀层材料靶丸、新型靶丸支撑技术、优化黑腔材料与构型以及减小燃料填充管直径等方面取得的一系列进展,并结合ICF物理需求,简要阐述了ICF靶的发展趋势。