Comparative proteomic analysis of round and elongated spermatids during spermiogenesis in mice

Spermiogenesis in mammals is an exclusive process during which haploid round spermatids mature into spermatozoa in the testis. Any abnormality in the process of spermiogenesis may result in male infertility. The aim of the present study was to characterize the differentially expressed proteins between round and elongated spermatids in mice using label-free quantitative mass spectrometry. Of the 2411 proteins identified in this study, 333 were differentially expressed with a ≥10-fold change, including 208 upregulated proteins and 125 downregulated proteins in round spermatids relative to elongated spermatids. Gene Ontology analysis showed that these differentially expressed proteins were categorized into 10 types of subcellular localizations, 9 molecular functions, and were involved in 9 biological processes. All the identified proteins participated in 268 different pathways. In addition, ubiquitin-mediated proteolysis and the proteasome pathway, autophagy, lysosome, and apoptosis pathways were involved in the mechanism of spermiogenesis. Our data may provide valuable information for a better understanding of spermiogenesis and help improve the diagnosis and treatment of male factor infertility.     

基于SWT方法的钢绞线索微动疲劳特性分析

为得到钢绞线索丝间接触区的应力场分布并预测微动疲劳裂纹萌生位置和微动疲劳寿命，本文利用参数化方法建立了精细化的钢绞线拉索有限元模型，包括整索模型和不同层丝间接触区域的局部精细化子模型．分析了钢绞线索在两种交变荷载工况下的应力场变化情况，并基于多轴疲劳SWT(Smith-Watson-Topper)临界平面法进行了疲劳特性分析和疲劳寿命预测．主要结论如下：钢绞线索内接触区边缘处的微动幅值较大，中心处几乎没有相对滑动，微动疲劳的初始裂纹萌生点位于接触区域边缘；经不同区域子模型分析比较，在轴向循环荷载作用下，外层钢丝的接触区域比内层钢丝更易发生微动疲劳损伤；在横向位移循环荷载作用下，同层钢丝因位置角度不同而产生了较大的疲劳特性差异，且相比轴向循环拉伸，该工况下最不利单丝的微动疲劳寿命更低；与非接触区域相比，接触区的疲劳寿命大幅降低，微动现象对钢绞线索的抗疲劳性能有明显降低作用．     

Experimental and computational studies of naphthyridine derivatives as corrosion inhibitor for N80 steel in 15% hydrochloric acid

The inhibition effect of three naphthyridine derivatives namely 2-amino-4-(4-methoxyphenyl)-1,8-naphthyridine-3-carbonitrile (ANC-1), 2-amino-4-(4-methylphenyl)-1,8-naphthyridine-3-carbonitrile (ANC-2) and 2-amino-4-(3-nitrophenyl)-1,8-naphthyridine-3-carbonitrile (ANC-3) as corrosion inhibitors for N80 steel in 15% HCl by using gravimetric, electrochemical techniques (EIS and potentiodynamic polarization), SEM, EDX and quantum chemical calculation. The order of inhibition efficiency is ANC-1>ANC-2>ANC-3. Potentiodynamic polarization reveals that these inhibitors are mixed type with predominant cathodic control. Studied inhibitors obey the Langmuir adsorption isotherm. The quantum calculation is in good agreement with experimental results.     

波形钢板-UHPC组合桥面板结构截面优化

对实腹式波形顶板-UHPC(超高性能混凝土)组合桥面板进行了改进, 采用空腹式结构建立波形钢板-UHPC组合桥面板有限元模型, 研究UHPC层厚度、波形钢板厚度、波形长度、下缘板宽度和波形高度等截面参数变化对组合桥面板受力特性的影响, 并确定其合理取值范围. 在此基础上, 通过理想点法对参数组合进行优化, 得到合理的参数匹配. 研究结果表明 相较于实腹式组合桥面板, 优化后的组合桥面板自重减小35%, 钢板弯折处应力减小16%; 相较于正交异性钢桥面板, 桥面板用钢量减小7%, 顶板与U肋连接位置应力减小47%.     

面向远海岛礁群的双向物流网络规划

针对若干远海岛礁群系统封闭性的分布特点,将中心岛礁选址、各岛礁建设泊位数量和规模、仓库储存量、运输船型和数量以及航线设置、班期组织等作为规划内容,以整个运输网络系统总成本最低为原则,综合考虑了仓库存储理论,建立了兼顾“选址-库存-路径”的规划模型。结合所建模型特点,提出了双层并行搜索遗传算法,构建了以海上运输为基本交通方式的双向物流系统。最后,以我国南海为例进行建模并求解,采用不同算法并通过多组不同规模的算例进行演算比较,验证了所建模型和算法的有效性与合理性。     

Modeling and numerical simulation of the resistance spot welding of zinc coated steel sheets using rounded tip electrode: Analysis of required conditions

This paper investigates the essential conditions to improve the accuracy of a resistance spot welding computational study of advanced zinc coated steel sheets using rounded tip electrode. An experimental analysis is performed to highlight the required considerations for a suitable simulation. A sequential Electrical-Thermal-Metallurgical and Mechanical (ETMM) finite element analysis with appropriate precautions of the contact conditions enables to accurately simulate the nugget development during the welding. A critical smooth evolution of the contact radius is required. A fine meshing with an interfacial mesh size of at least 0.05 × 10⁻³ m combined with a coupling time step of 0.0025 s between the electrical-thermal-metallurgical and the mechanical analysis allows a regular incrementation of the contact radius, without burdening the time computing. Accurate values of the contact resistance depending on the interfacial pressure and temperature are essential for a good simulation of the nugget size. The ETMM calculation is successfully extended to the simulation of the welding of a typical two sheets assembly.     

Coating properties of a novel water stationary phase in capillary supercritical fluid chromatography

The coating properties of a novel water stationary phase used in capillary supercritical fluid chromatography were investigated. The findings confirm that increasing the length or internal diameter of the type 316 stainless‐steel column used provides a linear increase in the volume of stationary phase present. Under normal operating conditions, results indicate that about 4.9 ± 0.5 μL/m of water phase is deposited uniformly inside of a typical 250 μm internal diameter 316 stainless‐steel column, which translates to an area coverage of about 6.3 ± 0.5 nL/mm² regardless of dimension. Efforts to increase the stationary phase volume present showed that etching the stainless‐steel capillary wall using hydrofluoric acid was very effective for this. For instance, after five etching cycles, this volume doubled inside of both the type 304 and the type 316 stainless‐steel columns examined. This in turn doubled analyte retention, while maintaining good peak shape and column efficiency. Overall, 316 stainless‐steel columns were more resistant to etching than 304 stainless‐steel columns. Results indicate that this approach could be useful to employ as a means of controlling the volume of water stationary phase that can be established inside of the stainless‐steel columns used with this supercritical fluid chromatography technique.     

X射线荧光光谱扩展基本参数法测定不锈钢中的多种成分

针对多种类不锈钢多元素成分解析问题,应用X射线荧光光谱分析软件UniQuant,采用扩展基本参数法对多元不锈钢、双相不锈钢进行光谱干扰校正和基体校正,重新设定和优化多元不锈钢基体元素的测试条件,计算背景因子、杂质因子、谱线灵敏度系数和光谱重叠系数,测定Si、Mn、S、P、Ni、Cr、Cu、Mo、V、Al、Ti、Nb、Co、Ta、Fe的相对标准偏差在0.04%~3.8%,Ca、Zr、W、As、Sb、Sn的相对标准偏差在5.4%~20.3%,未知样品检测值与认定值比对结果相当理想,Ni、Cr的平均偏差小于0.05%,可以用很少标准样品实现各类型不锈钢多元素成分准确检测,检测范围宽,适用性好。     

Disjoint Paths in Decomposable Digraphs

The k‐linkage problem is as follows: given a digraph and a collection of k terminal pairs such that all these vertices are distinct; decide whether D has a collection of vertex disjoint paths such that is from to for . A digraph is k‐linked if it has a k‐linkage for every choice of 2k distinct vertices and every choice of k pairs as above. The k‐linkage problem is NP‐complete already for [11] and there exists no function such that every ‐strong digraph has a k‐linkage for every choice of 2k distinct vertices of D [17]. Recently, Chudnovsky et al. [9] gave a polynomial algorithm for the k‐linkage problem for any fixed k in (a generalization of) semicomplete multipartite digraphs. In this article, we use their result as well as the classical polynomial algorithm for the case of acyclic digraphs by Fortune et al. [11] to develop polynomial algorithms for the k‐linkage problem in locally semicomplete digraphs and several classes of decomposable digraphs, including quasi‐transitive digraphs and directed cographs. We also prove that the necessary condition of being ‐strong is also sufficient for round‐decomposable digraphs to be k‐linked, obtaining thus a best possible bound that improves a previous one of . Finally we settle a conjecture from [3] by proving that every 5‐strong locally semicomplete digraph is 2‐linked. This bound is also best possible (already for tournaments) [1].     

钢渣与污泥协同资源化研究进展

钢渣和污泥作为传统大宗固体废弃物,始终面临处理成本高、回收利用率低等问题,但其内部含有大量可利用物质,具有较高的资源化利用价值,现已成为国内外的研究热点。为了提高钢渣与污泥绿色、高效、协同资源化利用,综述了近年来国内外钢渣在建筑、道路、水处理、农业等领域资源化利用的研究进展,立足固废无害化、减量化,从钢渣和污泥的资源化进行分析与总结,指出不同研究方法的特点和优劣,为固废资源化利用提供参考。并基于我国发展现状对钢渣与污泥资源化利用的未来发展方向进行了展望,以期为固废处理行业的良性发展提供一定的理论支撑。