Circularly polarized luminescence based on small organic fluorophores

Circularly polarized luminescence (CPL) has attracted attention as a next-generation light signal because of its carrying more information compared with normal and linearly polarized lights as well as its potential wide application in information fields. Recently, much attention has been paid to small organic molecules-based CPL emitters because of easy synthesis, fine structural modification at molecular level, and tunable wide range emission wavelength. This review highlights the development of small organic molecules-based CPL emitters in the past 5 years (2017–2021). The progress suggests that small organic molecules-based CPL emitters provide a simple and efficient way to generate CPL.     

Mechanistic Investigation and Conductance Modulation of a Metal-Molecule-Metal Junction via Extra Acid Addition

One important prerequisite for the fabrication of molecular functional device strongly relies on the understanding the conducting behaviors of the metal-molecule-metal junction that can respond to an external stimulus. The model Lewis basic molecule 4,4′-(pyridine-3,5-diyl)dibenzonitrile (DBP), which can react with Lewis acid and protic acid, was synthesized. Then, the molecular conducting behavior of DBP, DBP-B(C₆F₅)₃, and DBP-TfOH (DBP-B(C₆F₅)₃, and DBP-TfOH were produced by Lewis acid and protonic acid treatment of DBP) was researched and compared. Given that their identical physical paths for DBP, DBP-B(C₆F₅)₃, and DBP-TfOH to sustain charge transport, our results indicate that modifying the molecular electronic structure, even not directly changing the conductive physical backbone, can tune the charge transporting ability by nearly one order of magnitude. Furthermore, the addition of another Lewis base triethylamine (of stronger alkaline than DBP), to Lewis acid-base pair reverts the electrical properties back to that of a single DBP junction, that is constructive to propose a useful but simple strategy for the design and construction of reversible and controllable molecular device based on pyridine derived molecule.     

非富勒烯受体DA'D型稠环单元的结构修饰及电池性能研究

近年来,设计和合成高性能非富勒烯受体(NFAs)材料已经成为太阳能电池研究领域的前沿课题。基于DA'D型稠环结构的NFAs由于具有吸光系数高、能级和带隙可调、结构易于修饰、分子可高效合成、光电学性能优异等优点而受到了越来越广泛的关注。在短短7年的时间里,能量转换效率(PCE)从3%~4%提高到18%。2019年初邹应萍等报道了一个优秀的受体分子Y6,与PM6共混制备单结电池,获得了15.7%的能量转换效率。Y6类受体材料的中心给电子单元为DA'D型稠环结构,缺电子单元(A')通过氮原子与两个给电子单元(D)并联形成稠环结构,这有助于降低前线分子轨道能级并增强吸收,同时与氮相连的两个烷基链和位于噻吩并噻吩β位的两个侧链则有助于提高溶解度及调节结晶性。自Y6问世以来,人们对分子的结构剪裁进行了深入的研究,并报道了数十种新的结构。在这些新的受体中,DA'D部分的结构裁剪对提高器件效率和太阳能电池的性能起着至关重要的作用。本文对A'、D单元和侧链结构修饰的研究进展进行了综述。通过选择几组受体,对最近报道的分子进行分类,并将它们的光学、电化学、电学和光电性质与精确的结构修饰相关联,从而对结构-性能关系进行全面概述。     

Effects of particle size and concentration on bubble coalescence and froth formation in a slurry bubble column

A new approach for simulating the formation of a froth layer in a slurry bubble column is proposed. Froth is considered a separate phase, comprised of a mixture of gas, liquid, and solid. The simulation was carried out using commercial flow simulation software (FIRE v2014) for particle sizes of 60–150 μm at solid concentrations of 0–40 vol%, and superficial gas velocities of 0.02–0.034 m/s in a slurry bubble column with a hydraulic diameter of 0.2 m and height of 1.2 m. Modelling calculations were conducted using a Eulerian–Eulerian multiphase approach with k–ε turbulence. The population balance equations for bubble breakup, bubble coalescence rate, and the interfacial exchange of mass and momentum were included in the computational fluid dynamics code by writing subroutines in Fortran to track the number density of different bubble sizes. Flow structure, radial gas holdup, and Sauter mean bubble diameter distributions at different column heights were predicted in the pulp zone, while froth volume fraction and density were predicted in the froth zone. The model was validated using available experimental data, and the predicted and experimental results showed reasonable agreement. To demonstrate the effect of increasing solid concentration on the coalescence rate, a solid-effect multiplier in the coalescence efficiency equation was used. The solid-effect multiplier decreased with increasing slurry concentration, causing an increase in bubble coalescence efficiency. A slight decrease in the coalescence efficiency was also observed owing to increasing particle size, which led to a decrease in Sauter mean bubble diameter. The froth volume fraction increased with solid concentration. These results provide an improved understanding of the dynamics of slurry bubble reactors in the presence of hydrophilic particles.     

Air-Stable Hexagonal Bipyramidal Dysprosium(III) Single-Ion Magnets with Nearly Perfect D6h Local Symmetry

Eight-coordinated Dy^III centres with D_6h symmetry are expected to act as high-performance single-molecule magnets (SMMs) due to the simultaneous fulfilment of magnetic axiality and a high coordination number (a requisite for air stability). But the experimental realization is challenging due to the requirement of six coordinating atoms in the equatorial plane of the hexagonal bipyramid; this is usually too crowded for the central Dy^III ion. Here a hexaaza macrocyclic Schiff base ligand and finetuned axial alkoxide/phenol-type ligands are used to show that a family of hexagonal bipyramidal Dy^III complexes can be isolated. Among them, three complexes possess nearly perfect D_6h local symmetry. The highest effective magnetic reversal barrier is found at 1338(3) K and an open hysteresis temperature of 6 K at the field sweeping rate of 1.2 mT s⁻¹; this represents a new record for D_6h SMMs.     

Application of deuterated THENA for assigning the absolute configuration of chiral secondary alcohols

The structure of a constrained bicyclic chiral derivatizing agent (CDA), 1,2,3,4-tetrahydro-1,4-epoxynaphthalene-1-carboxylic acid, THENA 1, was modified by replacing both exo-methylene protons with deuterium atoms. The modified CDA, THENA-d₂2, could be used to assign the absolute configuration of chiral secondary alcohols with good reliability. Compared with THENA, the multiplicity of the methylene proton signals in the ¹H NMR spectra of THENA-d₂ derivatives is less complicated and the new CDA thus offers simpler NMR spectra for data interpretation.     

Effects of substituents on bridging ligands on the single‐molecule magnet properties of Zn2Dy2 cluster complexes

Two new Zn₂Dy₂ complexes were constructed from Zn (II) salen‐type Schiff base complex fragment and 2,6‐pyridinedimethanol (H₂pdm) or its Br‐substituted analogue (4‐bromopyridine‐2,6‐diyl)dimethanol (H₂Brpdm); their molecular formulas are [Zn₂Dy₂(L)₂(pdm)₂(MeOH)₂](ClO₄)₂ [ 1 , H₂L = N, N′‐ bis(3‐methoxysalicylidene)‐1,3‐diaminopropane] and [Zn₂Dy₂(L)₂(Brpdm)₂(MeOH)₂](ClO₄)₂ [ 2 ], the Dy (III) ions of which have a NO₇ triangular dodecahedral coordination sphere. The two complexes show not only ferromagnetic interaction but also field‐induced single‐molecule magnet (SMM) behavior, which are rare Dy (III)‐containing cluster complexes with the NO₇ triangular dodecahedral coordination sphere that can show good magnetic relaxation. The energy barrier value of complex 2 is higher than those of complex 1 and the Dy (III) complexes with the DyNO₇ triangular dodecahedral coordination configuration reported in the literature.     

RAFM钢TIG焊和电子束焊疲劳性能实验和分析模拟

利用ANSYS 对低活化铁素体马氏体(RAFM)钢进行非熔化极气体保护焊(TIG 焊)与电子束焊的抗疲劳模拟分析，再利用SDS200 电液伺服疲劳试验机对TIG 焊和电子束焊的两种RAFM 钢试件进行实验。通过施加相同梯度负荷对TIG 焊和电子束焊试件进行焊缝的疲劳性能实验。与实验结果对比分析，结果显示电子束焊优于 TIG 焊，但在一定负载下可以用TIG 焊代替电子束焊。     

三氯一氟甲烷分子在辐射场中的光谱性质与解离特性研究

采用B3LYP/6-311++g(3df,3pd)方法和基组对氟利昂物质CFC-11 (CFCl_3)分子进行了一系列的理论研究.包括了该分子的基态结构、电偶极矩、总能量、最高占据分子轨道能级E_H和最低未占据分子轨道能级E_L、能隙、红外与拉曼光谱性质、C-F键解离,并探讨电场对该分子的影响.结果表明:基态结构优化后的理论计算值和实验值的最大误差低于2%,C-F键受电场强度的增大而被拉长,能隙E_g随E_H和E_L的变化出现先增大后减小;电场影响着CFC-11分子的红外与拉曼光谱吸收强度,红外与拉曼光谱随着电场变化出现红移或蓝移现象.电场可作为一种辅助手段对其重叠或准重叠谱线进行分离.势阱深度随反向电场逐渐增大而减小,直至消失,使得C-F键的束缚能力逐渐减弱.本文有望为实现CFC-11分子最终发生解离而降解提供一种可行有效的调控手段.     

杂环分子-吗啉在同步辐射真空紫外光下的光电离解离研究

本文采用同步辐射真空紫外光电离质谱法和理论计算方法,研究了吗啉单体的光电离、解离及随后的裂解反应.实验测得吗啉单体的垂直电离能为8.37 eV(±0.05),与理论计算值8.41 eV相当吻合.实验观察到荷质比为86、57和29的吗啉碎片离子.实验和理论结果表明:荷质比为86的碎片是通过失去氢原子而产生的,而荷质比为57的碎片是通过开环消除CH_2O而形成的;荷质比为29的碎片是通过消除C_2H_4从碎片离子(C_3H_7N)~+(m/z=57)进一步解离而产生的.这一发现为研究脂肪族化合物的光损伤提供了有价值的见解,可能被转化为活细胞和其他生物系统.