A rapid,spatially dispersive frequency comb spectrograph aimed at gas phase chemical reaction kinetics

This New Views article will highlight some recent advances in high sensitivity gas detection using direct infrared absorption frequency comb laser spectroscopy, with a focus on frequency comb use in chemical reaction kinetics and our own contribution to this field. Our recently implemented detection technique uses a combination of a 12.9?GHz free spectral range virtually imaged phased array and diffraction grating to spatially disperse the mid-infrared frequency comb onto a camera. Individual frequencies or ‘comb teeth’ of a 250?MHz repetition-rate frequency comb are able to be resolved. High molecular sensitivity is achieved by increasing the interaction path length using a Herriott multipass cell. High spectral resolution, broadband spectral coverage, and high molecular sensitivity are all achieved on an adjustable 1–50 µs timescale, making this frequency comb apparatus ideal for measuring chemical reaction kinetics where multiple absorbing species can be monitored simultaneously. This New Views article will also discuss some of the challenges and decisions that chemists might face in implementing this advanced physics technology in their own laboratory.

Spatially dispersed 250 MHz mid-infrared frequency comb laser, with absorption of some frequencies by a dilute sample of methane.     

Capturing the experimental behaviour of a point-absorber WEC by simplified numerical models

The paper presents a wave basin experiment of a direct-driven point-absorber wave energy converter moving in six degrees of freedom. The goal of the work is to study the dynamics and energy absorption of the wave energy converter, and to verify under which conditions numerical models restricted to heave can capture the behaviour of a point-absorber moving in six degrees of freedom. Several regular and irregular long-crested waves and different damping values of the power take-off system have been tested. We collected data in terms of power output, device motion in six degrees of freedom and wave elevation at different points of the wave basin. A single-body numerical model in the frequency domain and a two-body model in the time domain are used in the study. Motion instabilities due to parametric resonance observed during the experiments are discussed and analysis of the buoy motion in terms of the Mathieu instability is also presented. Our results show that the simplified models can reproduce the body dynamics of the studied converter as long as the transverse non-linear instabilities are not excited, which typically is the case in irregular waves. The performance of the more complex time domain model is able to reproduce both the buoy and PTO dynamics, while the simpler frequency domain model can only reproduce the PTO dynamics for specific cases. Finally, we show that the two-body dynamics of the studied wave energy converter affects the power absorption significantly, and that common assumptions in the numerical models, such as stiff mooring line or that the float moves only in heave, may lead to incorrect predictions for certain sea states.     

基于相移偏折法的高反射表面面形测量技术

利用单相机所采集的图像实现了对光滑高反射表面面形的直接检测.首先利用相机获取参考平面在标准平面镜中的镜像,然后通过参考平面上的点与归一化成像平面上图像点之间的密集折返对应关系,求得待测镜面的深度距离,从而实现对高反射表面面形的测量.通过光线追迹将该测量过程转化为求解物空间中关于两对应光线束之间的相交问题.以相位为载体获取面形梯度分布,求得该表面的法向量场,并求解相应的反射光线束.通过光线追迹对该光线束与相应入射光线束求“交点”检测高反射表面.对标准平面镜进行实验检测,测量得到的面形平面度为0.19 mm.采用传统方法与本文所提方法对汽车后视镜进行检测,所得检测结果对应点之间的平均距离为0.15 mm,验证了本文方法检测镜面面形的有效性.     

The FDTD simulation for the performance of dispersive cloak devices

In this paper, we defined the scattering energy intensity based on the Poynting vector to quantitatively study the cloak effect of electromagnetic waves in the time domain. The influences of the effective working frequency bands of four kinds of electromagnetic cloak materials, incidence angle of electromagnetic waves and the number of approximately cloak layers on the cloak effect are studied. To the best of our knowledge, this is the first time to use the time domain method to quantitatively study the effective working frequency band and the scattering energy intensity of cloak materials.     

Direct calculation of time varying Aharonov-Bohm effect

The Aharonov-Bohm effect (ABE) for steady magnetic fields is a well known phenomenon. However, if the current in the infinite solenoid that creates the magnetic field is time-dependent, that is in the presence of both magnetic and electric fields, there is no agreement whether the effect would be present. In this note, we try to investigate time varying ABE by a direct calculation in a set-up with a weak time dependent magnetic field. We find that the electric field arising out of the time-varying magnetic field in the path of the electrons does not enter the action integral but only changes the path of the electron from the source to the slits and then on to the detector. We find a frequency dependent AB phase shift. At low frequencies the result smoothly approaches the one for a constant field as the frequency tends towards zero. On the other hand, for high frequencies such that the AB-phase induced in the path of the wave packet oscillates rapidly, the net effect will be very small which is borne out by our results.     

A secure communication scheme based on chaotic Duffing oscillators and frequency estimation for the transmission of binary-coded messages

This work presents a new technique to securely transmit and retrieve a message signal via chaotic systems. The main contribution of this paper is two-fold: the way that the message signal is encrypted in the frequency of a sinusoidal term and a novel frequency estimator for retrieving the message. In our system, a two-valued message signal modulates the frequency of the Duffing oscillator sinusoidal term. Then, two chaotic signals generated by the oscillator are encrypted with a Delta modulator and sent through a noisy channel. A Lyapunov-based observer is used in the receiver side to retrieve the sinusoidal term that contains the message and a novel frequency estimator is then used to retrieve the confidential message signal. The system was implemented in Matlab/Simulink in order to analyze its performance.     

Boosting Charge Transport in a 2D/3D Perovskite Heterostructure by Selecting an Ordered 2D Perovskite as the Passivator

We demonstrate that an ordered 2D perovskite can significantly boost the photoelectric performance of 2D/3D perovskite heterostructures. Using selective fluorination of phenyl-ethyl ammonium (PEA) lead iodide to passivate 3D FA_0.8Cs_0.2PbI₃, we find that the 2D/3D perovskite heterostructures passivated by a higher ordered 2D perovskite have lower Urbach energy, yielding a remarkable increase in photoluminescence (PL) intensity, PL lifetime, charge-carrier mobilities (ϕμ), and carrier diffusion length (L_D) for a certain 2D perovskite content. High performance with an ultralong PL lifetime of ≈1.3 μs, high ϕμ of ≈18.56 cm² V⁻¹ s⁻¹, and long L_D of ≈7.85 μm is achieved in the 2D/3D films when passivated by 16.67 % para-fluoro-PEA₂PbI₄. This carrier diffusion length is comparable to that of some perovskite single crystals (>5 μm). These findings provide key missing information on how the organic cations of 2D perovskites influence the performance of 2D/3D perovskite heterostructures.     

Bacteria and cancer cell pearl chain under dielectrophoresis

In this work, we aim to observe and study the physics of bacteria and cancer cells pearl chain formation under dielectrophoresis (DEP). Experimentally, we visualized the formation of Bacillus subtilis bacterial pearl chain and human breast cancer cell (MCF-7) chain under positive and negative dielectrophoretic force, respectively. Through a simple simulation with creeping flow, AC/DC electric fields, and particle tracing modules in COMSOL, we examined the mechanism by which bacteria self-organize into a pearl chain across the gap between two electrodes via DEP. Our simulation results reveal that the region of greatest positive DEP force shifts from the electrode edge to the leading edge of the pearl chain, thus guiding the trajectories of free-flowing particles toward the leading edge via positive DEP. Our findings additionally highlight the mechanism why the free-flowing particles are more likely to join the existing pearl chain rather than starting a new pearl chain. This phenomenon is primarily due to the increase in magnitude of electric field gradient, and hence DEP force exerted, with the shortening gap between the pearl chain leading edge and the adjacent electrode. The findings shed light on the observed behavior of preferential pearl chain formation across electrode gaps.     

Tailoring the dielectric properties and energy storage density of 1−x(0.94NaNbO3−0.06SZ)−xBi2O3 through substitution strategy

Energy storage using dielectric capacitors is a growing area of research and development. However, designing a highly performing dielectric capacitor is still a challenge. Despite the excellent results achieved in lead-based dielectrics, lead-free substitutes are essential because of the environmental concerns associated with lead-based products. The lead-free 1?x (0.94NaNbO₃? 0.06SrZrO₃)+ x Bi₂O₃ ceramics abbreviated NNSZ + xB for x = 0.0, 0.05, 0.1, 0.15, and 0.20 was fabricated via solid-state reaction. A recoverable energy density of 2.93 J cm?³ was obtained for NNSZ+0.1B, associated with high thermal stability (25–130 °C), excellent cycling (N = 10⁵), and high efficiency (η) of 83.5%. Moreover, the introduction of Bi₂O₃ significantly improved the electrical insulation (?_r at 1 kHz = 1608 and tan δ = 0.0038) and breakdown strength (380 kVcm?¹) of NNSZ+0.1B by minimizing the formation of sodium, bismuth, and oxygen vacancies. The results obtained in this study provide a benchmark for further investigations on NaNbO₃-based ceramics. More importantly, this study suggests that NNSZ + xB ceramics can be used in pulsed power technology.     

Second-order hydroelastic analysis of a floating plate in multidirectional irregular waves

Based on an analysis of second-order hydrodynamic forces induced by coupling of first-order wave potentials, second-order hydroelastic equations are established and solved in the frequency domain. The responses of a very large floating structure in multidirectional irregular waves are studied. The characteristics of the difference and sum frequency coordinates are discussed in detail; peaks can be found at the difference and sum frequencies close to the wet resonant frequencies of each mode. We present and analyze the maximum vertical displacement of different points as well as the time history of the vertical displacements of selected points. The differences of the combined (the summation of the linear and non-linear responses) and linear displacements of the selected points are calculated. Our results demonstrate that non-linear fluid forces influence the total responses of the referenced floating structure.