The Surface Activity of the Hydrated Proton Is Substantially Higher than That of the Hydroxide Ion

The behavior of hydroxide and hydrated protons, the auto‐ionization products of water, at surfaces is important for a wide range of applications and disciplines. However, it is unknown at which bulk concentration these ions start to become surface active at the water–air interface. Here, we report changes in the D₂O–air interface in the presence of excess D⁺_hyd/OD^?_hyd determined using surface‐sensitive vibrational sum‐frequency generation (SFG) spectroscopy. The onset of the perturbation of the D₂O surface occurs at a bulk concentration as low as 2.7±0.2 mm D⁺_hyd. In contrast, a concentration of several hundred mm OD^?_hyd is required to change the D₂O surface. The hydrated proton is thus orders of magnitude more surface‐active than hydroxide at the water–air interface.     

Dissolvable layered double hydroxide as a sorbent in dispersive micro‐solid phase extraction for the determination of acidic quinolones in honey by HPLC

This study presents a simple and green dispersive micro‐solid phase extraction method for preconcentration of acidic quinolones from honey prior to high performance liquid chromatography determination. A two‐dimensional nanostructured zinc‐aluminum layered double hydroxide was synthesized and used as the sorbent for dispersive micro‐solid phase extraction. Its different characteristics from conventional sorbents is that it is dissolvable in acidic solution (pH < 4). After the extraction, the analyte elution step was omitted and thus the use of organic solvents was avoided. The key parameters influencing the extraction efficiency such as the amount of sorbent, pH of sample solution, vortex time, type and volume of acidic solution were investigated and optimized. The method exhibited low limits of detection (3.0?5.0 ng/g), good linearity (10?2000 ng/g) with coefficients of determinations higher than 0.9991, acceptable precision (RSD<9.1%) and accuracy (RE<5.8%). The proposed method is fast, efficient, eco‐friendly, and suitable for the determination of acidic quinolones in honey samples.     

基于金纳米簇探针的荧光猝灭检测铁离子

以D-色氨酸为保护剂和还原剂, 采用水热法快速制备了具有强荧光的金纳米簇(D-Trp@AuNCs); 以其作为荧光探针, 建立了基于荧光猝灭的选择性高灵敏检测Fe³⁺的传感方法. 利用透射电子显微镜(TEM)、 紫外-可见光谱(UV-Vis)和红外光谱(IR)等手段对制备的金纳米簇进行了表征, 并利用荧光光谱研究了D-Trp@AuNCs的荧光性能. 结果表明, D-Trp@AuNCs具有较好的生物相容性, 其最大激发波长为370 nm, 最大发射波长为460 nm; 向金纳米簇溶液中加入Fe³⁺后, D-Trp@AuNCs的荧光发生明显猝灭, 其猝灭程度与Fe³⁺的浓度在0.3~500.0 μmol/L范围内呈现良好的线性关系, 检出限为33.1 nmol/L(S/N=3). 将该荧光探针用于实际水样中Fe³⁺的检测, 回收率为86.6%~106.5%.     

Correlation between Boron Isotope of Coral Acropora and pH Value of Seawater Surface

A water circulation system with the almost same element composition and socket type was adopted in coral Acropora culture under different seawater pH value conditions and the data of the relationship between boron isotopic compositions of coral and seawater pH value by thermoelectric ionization mass spectrometer were obtained. According to the correlations between α_carb-3 of coral and the pH value of cultured seawater, α_carb-3 was not a constant but related to pH value, indicating that B(OH)₃ also incorporated carbonate. Therefore, the theoretical formula could not be used to calculate the seawater pH value from the δ¹¹B_carb value of the measured marine biological carbonate. The empirical equations obtained experimentally would be an alternative method to calculate the seawater pH value. In addition, the mixed precipitation of CaCO₃ and Mg(OH)₂ was found in aquaculture tanks with high pH value, and the δ¹¹B of the solid was significantly higher than that of cultured seawater. The result indicated that the presence of Mg(OH)₂ had a significant effect on the boron isotope fractionation, which deserved our attention.     

Influence of imide functionalized organo‐modified Mg‐Al layered double hydroxide on the thermal and mechanical properties of new aliphatic‐aromatic poly (amide‐imide)

A new dicarboxylic acid modified Mg‐Al LDH (DLDH) containing imide groups was prepared and its effects on the thermal and mechanical properties of the new synthesized aliphatic‐aromatic poly (amide‐imide) (PAI) were investigated via preparation of PAI/nanocomposite films by solution casting method. The results of X‐ray diffraction (XRD), field emission‐scanning electron microscopy (FE‐SEM) and transmission electron microscopy (TEM) showed a uniform dispersion for LDH layers into the PAI matrix. For comparison, the effects of polyacrylic acid‐co‐poly‐2‐acrylamido‐ 2‐methylpropanesulfonic acid (PAMPS‐co‐PAA) modified Mg‐Al LDH (ALDH) on the PAI properties were also studied. The thermogravimetric analysis (TGA) results exhibited that the temperature at 5 mass% loss (T₅) increased from 277 °C to 310 °C for nanocomposite containing 2 mass% of DLDH, while T₅ for nanocomposite containing 2 mass% of ALDH increased to 320 °C, along with the more enhancement of char residue compared to the neat PAI. According to the tensile test results, with 5 mass% DLDH loading in the PAI matrix, the tensile strength increased from 51.6 to 70.8 MPa along with an increase in Young's modulus. Also the Young's modulus of PAI nanocomposite containing 5 mass% ALDH reduced from 1.95 to 0.81 GPa.     

Ferric chloride-promoted direct trifluoromethylselenolation of nitrogen-containing heterocyclic compounds by Se-(trifluoromethyl) 4-methylbenzenesulfonoselenoate in water

The ferric chloride-promoted direct trifluoromethylselenolation of indoles and other nitrogen-containing heterocyclic compounds in water was performed by employing TsSeCF₃ as a trifluoromethylselenolation reagent. The shelf-stable and readily accessible reagents, along with the environmentally friendly and mild reaction conditions make this method an effective alternative for the trifluoromethylselenolation of electron-rich aromatics.     

高中化学创新实验课程的设计与实施*

将学生所学的化学理论知识与生活实际和学科最前沿的研究热点相结合,开发并实施了 “氢氧化镁纳米材料的制备及其在处理重金属废水中的应用” 创新实验课程。该课程通过文献调研、方案设计、实验操作、结果与讨论以及论文撰写等环节,激发学生的创新潜能,系统培养学生的创新综合素质和责任意识,这有助于更好地达成化学学科核心素养。     

Modified layered bimetallic compound used as a novel adsorbent for the solid-phase extraction of monoaromatic hydrocarbons from water samples prior to gas chromatography–mass spectrometry

This study reports a promising method of solid-phase extraction for determining the toluene, ethylbenzene, p-xylene, m-xylene, o-xylene, 1,3,5-trimethylbenzene, and 1,2,4-trimethylbenzene in water samples by gas chromatography–mass spectrometry (GC–MS). Prior to this procedure, the magnesium–aluminum bimetallic hydroxides modified with sodium dodecylbenzenesulfonate (Mg/Al-SDBS-LDH) were prepared and served as the novel solid-phase extractant. The Mg/Al-SDBS-LDH has advantage of good hydrophobicity and larger spacing which facilitates the monoaromatic hydrocarbons (MAHCs) into the interlayer for adsorption. As a result, the seven MAHCs in 500 mL water samples were enriched greatly, and the theoretical enrichment factor reached to 125 times. Under the optimized conditions of solid-phase extraction (SPE) and GC–MS, the mass concentration of each MAHC (0.005–10, 0.01–10, or 0.05–10 ng/mL) had a fine linear relationship with peak area. The correlation coefficients were more than 0.995. The detection limits were between 0.001 and 0.01 ng/mL, and the RSD were between 3.1% and 6.6%. The method had been applied to determine the seven MAHCs in the Dongfengqu river water and laboratory wastewater of Chengdu University of Technology successfully.     

SCR performance enhancement of NiMnTi mixed oxides catalysts by regulating assembling methods of LDHs-Based precursor

A series of NiMnTi mixed metal oxides (Ni/Mn-TiO₂, Mn/NiTi-LDO and TiO₂/NiMn-LDO, NiMnTi-LDO) were synthesized via different assembling methods and evaluated in the selective catalytic reduction of NO_x with NH₃(NH₃-SCR). As the results presented, catalysts via diverse assembling methods of LDHs templates afforded different catalytic denitrification (DeNO_x) performance, which might be related to the exposure degree of active constituents and the interaction intensity between metal components. Noticeably, compared with Ni/Mn-TiO₂, Mn/NiTi-LDO and TiO₂/NiMn-LDO catalysts, the NiMnTi-LDO catalyst deriving from one step in-situ method NiMnTi-LDH precursor template exhibited the most desirable performance at temperature window of 150–360 °C in NH₃-SCR (above 90% NO_x conversion with 95% N₂ selectivity). The specific structure and property of samples were correlated by means of a series of characterizations, where the results indicated that NiMnTi-LDO possessed the highest surface area, the strongest redox ability, the most abundant acid amount and the best dispersion.     

Synthesis of ionic liquid intercalated layered double hydroxides of magnesium and aluminum: A greener catalyst of Knoevenagel condensation

Due to their structural merits that arise from their stability and high surface area, the layered double hydroxide (LDH) materials have caused strong attention. These characteristics provided intriguing possibilities with improved efficiency for catalytic applications. In this work, the preparation of 1-butyl-3-methylimidazolium hydroxide ([BMIM]⁺OH⁻) intercalated by a facile approach in a layered double hydroxide (LDH) matrix is reported and its implementation as a greener catalyst is shown. Different physico-chemical techniques such as XRD, FTIR, TGA, and N₂-physisorption, HRTEM, and CO₂ adsorption are implemented to characterize the structure of the fabricated catalysts. The [BMIM]⁺OH⁻/LDH exhibit outstanding catalytic performance in Knoevenagel condensation, resulting from the high LDH surface area and synergistic effects between both the intercalated ionic liquid and LDHs matrix. Knoevenagel’s fabricated catalysts can be exploited to catalyze different condensations and can be reused well. This work therefore generates good opportunities in the field of catalysis for the preparing and implementation of LDH-based catalysts.