一种通过梯形PPMgLN波导倍频实现带宽可调谐光源的理论研究

本文设计了一种梯形的周期极化掺镁铌酸锂(PPMgLN)波导,并通过在传播方向上引入温度梯度来拓宽其倍频(SHG)过程的泵浦光源可接收带宽。通过有限差分的光束传输法,计算波导的有效折射率,并进行波导尺寸的设计。结果表明,通过改变梯形波导不同位置的温度,使其形成一个温度梯度,可拓宽泵浦光源的波长可接收带宽。本文所设计的PPMgLN波导最大泵浦光源可接收带宽为C波段,即1 530~1 565 nm,该波导可倍频C波段,得到输出波段带宽为765~782.5 nm,温度调谐范围为30~150 ℃。     

The behavior of capillary suspensions at diverse length scales: From single capillary bridges to bulk

Liquid-liquid-solid systems are becoming increasingly common in everyday life with many possible applications. Here, we focus on a special case of such liquid-liquid-solid systems, namely, capillary suspensions. These capillary suspensions originate from particles that form a network based on capillary forces and are typically composed of solids in a bulk liquid with an added secondary liquid. The structure of particle networks based on capillary bridges possesses unique properties compared with networks formed via other attractive interactions where these differences are inherently related to the properties of the capillary bridges, such as bridge breaking and coalescence between adjacent bridges. Thus, to tailor the mechanical properties of capillary suspensions to specific requirements, it is important to understand the influences on different length scales ranging from the dynamics of the bridges with varying external stimuli to the often heterogeneous network structure.     

基于图像特征检测和匹配的无人船航行姿态角提取方法

计算机视觉的飞速发展, 使得采用视觉技术辅助无人船航行成为可能. 在无人船巡航过程中, 获取船体航向是航行控制的必备基础. 特征匹配是无人船相关视觉技术中的重要部分, 是目标识别和定位等功能的关键步骤. 获取无人船运动姿态的基本步骤是对图像前后帧进行有效的特征提取和匹配. 针对水域环境中的图像静态特征提取速度慢、精度低的问题, 本文提出一种图像匹配方法以求取无人船的航行姿态角. 首先对图像预处理, 并对有效区域进行特征提取. 其次, 设计一种基于描述子相似度的初始特征匹配策略. 再其次, 筛选特征匹配对, 优化模型参数. 最后, 通过前后帧旋转矩阵计算航行姿态角. 实验表明, 该方法能有效提取无人船的航行姿态角.     

Simulating the dynamic behavior of planetary gearbox based on improved Hanning function

Planetary gearboxes are widely used in industrial machines. They usually work in harsh environments giving rise to damages and high maintenance costs. Condition monitoring is a key action allowing one to detect the presence of such damage ensuring healthy running conditions. The knowledge of the dynamic behavior of such a gearbox can be achieved using modeling tools as a primary step before conditioning the monitoring subject. In addition, modeling a gear set can help in the stage of design in order to optimize physical and geometric parameters of the system. Therefore, in this work, a two-dimensional lumped parameter model is adopted to build all vibration sources. The time-varying mesh stiffness is approximated as a square wave form. A novel mathematical formulation is proposed to model the amplitude modulation phenomenon due to the rotational motion of the planets around the center of the gearbox. Finally, the overall vibration signal is concluded as a summation of all vibration components influenced by the modulation function.     

Flume testing of passively adaptive composite tidal turbine blades under combined wave and current loading

The tidal energy industry is progressing rapidly, but there are still barriers to overcome to realise the commercial potential of this sector. Large magnitude and highly variable loads caused by waves acting on the turbine are of particular concern. Composite blades with in-built bend-twist elastic response may reduce these peak loads, by passively feathering with increasing thrust. This could decrease capital costs by lowering the design loads, and improve robustness through the mitigation of pitch mechanisms. In this study, the previous research is extended to examine the performance of bend-twist blades in combined wave–current flow, which will frequently be encountered in the field. A scaled 3 bladed turbine was tested in the flume at IFREMER with bend-twist composite blades and equivalent rigid blades, sequentially under current and co-directional wave–current cases. In agreement with previous research, when the turbine was operating in current alone at higher tip speed ratios the bend-twist blades reduced the mean thrust and power compared to the rigid blades. Under the specific wave–current condition tested the average loads were similar on both blade sets. Nevertheless, the bend-twist blades substantially reduced the magnitudes of the average thrust and torque fluctuations per wave cycle, by up to 10% and 14% respectively.     

Microstructure and dielectric study of pure BST and doped BSTF ceramic materials by broadband dielectric spectroscopy

Pure BST and doped BSTF (with BSTF2: Fe₂O₃ 2 wt % and BSTF4: Fe₂O₃ 4 wt %) ceramics were prepared by solid state reaction. XRD pattern showed the different phases were formed depend on the weight percent of Fe₂O₃. The crystal size and lattice parameters increased while the lattice strain decreased. The topography of the sintered samples shows increase of the grain size with increasing Fe₂O₃ ratio and hence enhances the compaction of ceramics. Broadband dielectric spectroscopy was employed to investigate the effect of magnetite nanoparticle on the dielectric properties of the pure BST ceramic. The interfacial polarization and the conductivity contribution reflect the high values of permittivity and its gradual increase as frequency decreases. The two BSTF samples show relaxation peak dynamic originated from presence of immobile species/electrons at low temperatures and defects/vacancies results from the formation of oxygen vacancies originates from the spontaneous change in oxidation states of Fe ions (Fe ^3+/Fe²⁺) at high temperatures. The relaxation rate obeys Arrhenius law at high temperatures in case of BST sample with activation energy 225 kJ/mol. This high value of activation energy at higher temperatures reflects and confirms the slowed down of the dynamics at the interphase and the decoupling nature of the OH-dynamic and the interfacial polarization.     

Morphology and properties of super-toughened bio-based poly(lactic acid)/poly(ethylene-co-vinyl acetate) blends by peroxide-induced dynamic vulcanization and interfacial compatibilization

Super-toughened poly(lactic acid) (PLA)/poly(ethylene-co-vinyl acetate) (EVA) blends were prepared via 2,5-dimethyl-2,5-di(tert-butylperoxy)hexane (AD) induced dynamic vulcanization and in situ interfacial compatibilization. The effects of AD on the morphology and properties of PLA/EVA blends were studied using a Brabender torque rheometer, gel content test, scanning electron microscopy (SEM), differential scanning calorimetry (DSC) thermogravimetric analysis (TGA) and mechanical properties test. The torque and gel content demonstrated that EVA and PLA was successfully vulcanized in the presence of free radicals obtained by the decomposition of the 2,5-dimethyl-2,5-di(tert-butylperoxy)hexane (AD). Additionally, the gel content results indicated that, compared with PLA, EVA is more aggressive with free radicals. The SEM revealed that a relatively uniform phase morphology and good interfacial compatibilization were achieved in the dynamically vulcanized PLA/EVA/AD blends. The interfacial reaction and compatibilization between the component polymers resulted in the formation of super-toughened PLA/EVA blended materials.