Doppler effects of an oscillating line source in shear flow with a free surface

The linearised water-wave radiation problem for the oscillating 2D submerged source in an inviscid shear flow with a free surface is investigated analytically. There is a nonzero surface velocity. The depth is infinite and the vorticity is uniform. The amplitudes radiated from the source are calculated analytically. Due to Doppler effects, there may be up to four different emitted waves, and there is resonance with zero group velocity and infinite amplitude.     

On mechanical waves and Doppler shifts from moving boundaries

We investigate the propagation of infinitesimal harmonic mechanical waves emitted from a boundary with variable velocity and arriving at a stationary observer. In the classical Doppler effect, X_s(t)=vt is the location of the source with constant velocity v. In the present work, however, we consider a source co‐located with a moving boundary x=X_s(t), where X_s(t) can have an arbitrary functional form. For ‘slowly moving’ boundaries (i.e., ones for which the timescale set by the mechanical motion is large in comparison to the inverse of the frequency of the emitted wave), we present a multiple‐scale asymptotic analysis of the moving boundary problem for the linear wave equation. We obtain a closed‐form leading‐order (with respect to the latter small parameter) solution and show that the variable velocity of the boundary results not only in frequency modulation but also in amplitude modulation of the received signal. Consequently, our results extend the applicability of two basic tenets of the theory of a moving source on a stationary domain, specifically that (i) for non‐uniform boundary motion can be inserted in place of the constant velocity v in the classical Doppler formula and (ii) that the non‐uniform boundary motion introduces variability in the amplitude of the wave. The specific examples of decelerating and oscillatory boundary motion are worked out and illustrated. Copyright © 2017 John Wiley & Sons, Ltd.     

Laser Doppler anemometry measurements of laminar flow in helical pipes

Three-dimensional laser Doppler anemometry measurements are performed on developed laminar flow in three helical pipes. The experimental observations are compared to results of numerical calculations employing the fully elliptic numerical method. Good agreement is found between measured data and numerical results. The three helical pipes, with curvature ratios of 0.0734 and 0.1374 and non-dimensional pitches of 0.0793 and 0.193, are adopted to study the effects of curvature and pitch on laminar flow in the experimental approach. The range of Reynolds numbers is 500–2000 to ensure laminar flow in the entire helical pipe. Both the profile shapes of the normal components of the secondary flow and those of the axial flow along the same centerline present not only similar patterns but also similar change when pitch, curvature ratio, and Reynolds number vary. The results demonstrate comprehensive relationships between the axial flow and the secondary flow.     

The development of an axisymmetric curved turbulent wall jet

An experimental study has been carried out of the low speed Coanda wall jet with both streamwise and axisymmetric curvature. A single component laser Doppler technique was used, and by taking several orientations at a given point, values of the three mean velocities and five of the six Reynolds stresses were obtained. The lateral divergence and convex streamwise curvature both enhanced the turbulence in the outer part of the jet compared with a plane two-dimensional wall jet. The inner layer exhibited a large separation of the positions of maximum velocity and zero shear stress. It was found that the streamwise mean velocity profile became established very rapidly downstream of the slot exit. The profile appeared fairly similar at later downstream positions, but the mean radial velocity and turbulence parameters showed the expected nonself preservation of the flow. Removal of the streamwise curvature resulted in a general return of the jet conditions toward those expected of a plane wall jet. The range and accuracy of the data may be used for developing turbulence models and computational techniques for this type of flow.     

激光多普勒测速技术在气液两相流中的应用

本文采用激光颗粒动态分析仪(PDA)测量了钢包底部喷吹气液两相流中气泡的直径和气泡上升速度的分布;采用激光多普勒测速仪(LDA)测量了气液两相区和液体单相循环区液体速度场的分布。测量结果表明:气泡在脱离喷嘴上浮一定距离后,其大小基本保持不变;在气液两相区中,气泡速度和液体速度的分布均服从高斯分布;液体在单相区作循环流动,在侧壁与底部交接处,存在液体流动的“死区”。     

Velocity profile measurement by ultrasonic doppler method

The ultrasonic velocity profile measuring method has been developed at PSI for application in fluid mechanics and fluid flow measurement. It uses pulsed ultrasonic echography together with the detection of the instantaneous Doppler shift frequency. This method has the following advantages over the conventional techniques: (1) an efficient flow mapping process, (2) applicability to opaque liquids, and (3) a record of the spatiotemporal velocity field. After a brief introduction of its principle, the characteristics and specifications of the present system are given. Then examples in fluid engineering for oscillating pipe flow, T-branching flow of mercury, and recirculating flow in a square cavity are described that confirm the method's advantages. Several other works under way by other investigators are introduced. A potential for in-depth study of fluid dynamics is demonstrated by several examples from an investigation of modulated wavy flows in a rotating Couette system. The position-averaged power spectrum and the time-averaged energy spectral density were used to study the dynamic characteristics of the flow, and subsequently the velocity field was decomposed into its intrinsic wave structure based on two-dimensional Fourier analysis.     

Reconstruction and interpretation of photon Doppler velocimetry spectrum for ejecta particles from shock-loaded sample in vacuum

The photon Doppler velocimetry(PDV) spectrum is investigated in an attempt to reveal the particle parameters of ejecta from shock-loaded samples in a vacuum. A GPU-accelerated Monte–Carlo algorithm, which considers the multiplescattering effects of light, is applied to reconstruct the light field of the ejecta and simulate the corresponding PDV spectrum.The influence of the velocity profile, total area mass, and particle size of the ejecta on the simulated spectra is discussed qualitatively. To facilitate a quantitative discussion, a novel theoretical optical model is proposed in which the singlescattering assumption is applied. With this model, the relationships between the particle parameters of ejecta and the peak information of the PDV spectrum are derived, enabling direct extraction of the particle parameters from the PDV spectrum.The values of the ejecta parameters estimated from the experimental spectrum are in good agreement with those measured by a piezoelectric probe.     

一种鲁棒性强的OFDM 水声通信系统*

为了在不同衰落水声信道下实现正交频分复用水声通信，该文提出了一种鲁棒性强的正交频分复用水声通信方案，方案包括编码调制、信道估计和多普勒估计等内容。为了使该系统更稳健，整个信道编码分为两个步骤。首先，循环冗余校验编码器和里德-所罗门编码器用于编码整个数据包，然后循环冗余校验编码器和Turbo 编码器用于编码每个数据帧，其中比特交织编码调制技术用来对抗信道的时变特性。为了得到水声信道估计，使用线性最小均方误差估计器来处理导频数据得到信道估计值。多普勒估计包括帧的多普勒估计和符号的多普勒估计。实验结果表明该系统在不同的衰落信道下都能实现正确的跟踪和译码，系统的鲁棒性能优越。此外，该系统算法计算简单，易于实现，具有良好的工程应用价值。     

Comparison of laser Doppler and laser speckle contrast imaging using a concurrent processing system

Full field laser Doppler imaging (LDI) and single exposure laser speckle contrast imaging (LSCI) are directly compared using a novel instrument which can concurrently image blood flow using both LDI and LSCI signal processing. Incorporating a commercial CMOS camera chip and a field programmable gate array (FPGA) the flow images of LDI and the contrast maps of LSCI are simultaneously processed by utilizing the same detected optical signals. The comparison was carried out by imaging a rotating diffuser. LDI has a linear response to the velocity. In contrast, LSCI is exposure time dependent and does not provide a linear response in the presence of static speckle. It is also demonstrated that the relationship between LDI and LSCI can be related through a power law which depends on the exposure time of LSCI.