Cu/CuO-Graphene Foam with Laccase-like Activity for Identification of Phenolic Compounds and Detection of Epinephrine

Although great progress has been made in the advancement of nanozymes, most of the studies focus on mimicking peroxidase, oxidase, and catalase, while relatively few studies are used to mimic laccase. However, the use of nanomaterials to mimic laccase activity will have great potential in environmental and industrial catalysis. Herein, Cu/CuO-graphene foam with laccase-like activity was designed for the identification of phenolic compounds and the detection of epinephrine. In a typical experiment, the formation mechanism of Cu/CuO-graphene foam was investigated during the pyrolysis process by thermogravimetric-mass spectrometry. As a laccase mimic, Cu/CuO-graphene foam exhibited excellent catalytic activity with a Michaelis-Menten constant and a maximum initial velocity of 0.17 mmol/L and 0.012 mmol∙L^-1∙s^-1, respectively. Based on this principle, Cu/CuO-graphene foam nanozyme could differentially catalyze phenolic compounds and 4-aminoantipyrine for simultaneous identification of phenolic compounds. Furthermore, a colorimetric sensing platform was fabricated for the quantitative determination of epinephrine, showing linear responses to epinephrine in the range of 3 mg/mL to 20 mg/mL with the detection limit of 0.2 mg/mL. The proposed Cu/CuO-graphene foam nanozyme could be applied for the identification of phenolic compounds and the detection of epinephrine, showing great potential applications for environmental monitoring, biomedical sensing, and food detection fields.     

基于抛光基材的热蒸镀铜箔生长高平整单层石墨烯薄膜

在石墨烯的化学气相沉积工艺中,铜箔是决定石墨烯薄膜质量的重要因素。传统铜箔由于制备工艺的限制,存在大量的缺陷,导致石墨烯薄膜的成核密度较高。本工作选用抛光铝板、抛光不锈钢板、微晶玻璃和SiO₂/Si作为基材,用热蒸镀法制备了不同粗糙度的铜箔,并详细讨论了以该系列铜箔生长高平整度石墨烯薄膜的条件及铜箔对石墨烯薄膜品质的影响。实验结果表明,铜箔以(111)取向为主,与基材分离后,表面具有纳米级平整度。在生长石墨烯后,从SiO₂/Si剥离的铜箔成核密度是4种基材中最小的。同时,从SiO₂/Si剥离的铜箔晶体结构变化最不明显,具有良好的结晶性,表面几乎不存在铜晶界缺陷。当压强为3 000 Pa,氢气和甲烷流速分别为300 mL/min和0.5 mL/min时,可以获得约1 mm横向尺寸的石墨烯单晶晶畴。     

Study of nano‐Cu/SiO2 catalysts for highly selective hydrogenation of acetophenone

Hydrogenation of acetophenone over nano‐Cu/SiO₂ catalysts was investigated. The catalysts, prepared by a liquid precipitation method using various precipitating agents, were characterized using low‐temperature nitrogen adsorption, X‐ray diffraction, temperature‐programmed desorption of ammonia, hydrogen temperature‐programmed reduction, transmission electron microscopy and X‐ray photoelectron spectroscopy. It was found that the catalysts prepared by a homogeneous precipitation method had better activity and stability than those prepared by a co‐precipitation method. The catalyst prepared using urea as precipitating agent had well‐dispersed copper species, high surface area and abundant pore structure. The catalytic performance and mechanism of the Cu/SiO₂ catalysts were further studied. It was found that the activity and stability of the catalysts could be improved by adjusting the proportion of Cu⁺/(Cu⁺ + Cu⁰). The sample prepared using urea as precipitating agent presented higher activity and selectivity. Also, the catalyst prepared using urea maintained a high catalytic performance while being continuously used for 150 h under the optimal reaction conditions.     

基于碳点的荧光纳米开关灵敏检测Cu(Ⅱ)离子和焦磷酸盐

利用羟基与氨基在高温条件下反应，不断聚合生成碳点（CDs），该碳点可发射不依赖激发波长的明亮的红色荧光.将CDs作为目标敏感荧光团时，发现Cu²⁺可特异性猝灭碳点的荧光，而焦磷酸盐（PPi）可在一定程度上恢复上述体系的荧光.其中，Cu²⁺对CDs的荧光猝灭是由于Cu²⁺与CDs发生络合反应，从而发生静态猝灭过程；而加入PPi之后，由于它与CDs的结合能力更强，因此Cu²⁺离开CDs的表面，体系的荧光得以恢复.在此基础上构建了一种高选择性、高灵敏度的off-on荧光纳米开关传感体系，分别用于Cu²⁺和PPi的定量检测，检出限分别达2.14 μmol/L和1.85 μmol/L.该传感体系可应用于实际样品检测，拓宽了荧光CDs的传感应用，为其在生物体内目标分子的检测提供了可能性.     

电阻率与强度性能的关联及铜合金性能分区

铜合金以低电阻率为特征,由于电阻率与强度存在着共同的微观结构机理,两者往往协同变化,而导致难以对合金进行性能的全面评估和选材.本文以Cu-Ni-Mo合金作为研究对象,以团簇结构[Mo_1-Ni_(12)]构建固溶体的近程序结构模型,解析了电阻率和强度依赖于成分的定量变化规律,并定义了拉伸强度/电阻率的值为代表合金本质特性的"强阻比",得到了完全固溶态Cu-Ni-Mo合金的强阻比为7×10~8MPa/?·m,完全析出态的强阻比为(310—490)×10~8MPa/?·m.进而应用强阻比对常用铜合金进行了性能分区,给出铜合金材料选材的依据,得出了基于Cu-(Cr, Zr, Mg, Ag, Cd)等二元基础体系的铜合金适用于高强高导应用,而基于Cu-(Be, Ni, Sn, Fe, Zn, Ti, Al)等为基础二元体系的铜合金不能实现高强高导.该强阻比为310的特征性能分界线的发现为合金性能的全面评估提供了量化依据,可指导高强高导铜合金的选材和研发.     

A new ternary Cu (II) complex with 4,7-dimethyl-1,10-phenanthroline and NOO-type tridentate Schiff base ligand: Synthesis,crystal structure,biomacromolecular interactions,and radical scavenging activities

NOO-type tridentate Schiff base, N-salicylidene-2-aminobenzoic acid, (H₂L), and its ternary Cu (II) complex containing H₂L Schiff base and 4,7-dimethyl-1,10-phenanthroline (4,7-dmphen), [Cu(4,7-dmphen)(H₂L)]₂7H₂O, have been synthesized and characterized by CHN analysis, ESI-MS, FTIR, and single-crystal X-ray diffraction techniques. The interaction of alone H₂L Schiff base ligand and ternary Cu (II) complex with biomacramolecules {calf thymus DNA (CT-DNA) and bovine serum albumin (BSA)} has been investigated by electronic absorption and fluorescence spectroscopy. The experimental results indicate that H₂L Schiff base ligand and ternary Cu (II) complex bind to CT-DNA by means of a moderate intercalation mode. Furthermore, the fluorescence quenching mechanism between H₂L Schiff base ligand and ternary Cu (II) complex with BSA possesses a static quenching process. Radical scavenging activity of H₂L Schiff base ligand and ternary Cu (II) complex was measured in terms of EC₅₀, using the DPPH and H₂O₂ methods. Biomacromolecule interactions and scavenging activity studies revealed that ternary Cu (II) complex yielded better results than H₂L Schiff base ligand alone.     

Water‐Soluble Luminescent Hybrid Composites Consisting of Oligosilsesquioxanes and Lanthanide Complexes and their Sensing Ability for Cu2+

Water‐soluble hybrid composites with great potential for selective and sensitive sensing and that are obtained through simple, rapid, and environmentally friendly methods are highly desirable and remain a challenging task. Herein, we present luminescent hybrid composites that were realized by linking Na₃[Ln(dpa)₃] (dpa=2,6‐pyridinedicarboxylic acid) to octa‐amino functionalized polyhedral oligomeric silsesquioxane (POSS‐NH₂) through hydrogen‐bonding interactions between the oxygen atoms of the carboxylate groups of dpa and the hydrogen‐bond‐donor amino groups. The resulting hybrid composites Ln(dpa)₃@POSS‐NH₂ are highly soluble in aqueous solutions and the quantum yield of Eu(dpa)₃@POSS‐NH₂ is as high as 56.5 % or 46.3 % in the solid state and in aqueous solution, respectively, as determined by using the integrating sphere method. The novel water‐soluble luminescent hybrid composites exhibit high thermal and photostability, and the emitted colors of the resulting hybrid composite can be finely tuned by changing the Eu³⁺/Tb³⁺ ratio. Interestingly, Eu(dpa)₃@POSS‐NH₂ hybrid composites exhibited an effective switch‐off fluorescence response to Cu²⁺ over other common metal ions in aqueous media.     

基于拉曼热测量技术的铜基复合物法兰GaN基晶体管的热阻分析

采用拉曼热测量技术结合有限元热仿真模型,分析比较新型铜/石墨复合物法兰封装与传统铜钼法兰封装的GaN器件的结温与热阻,发现前者的整体热阻比铜钼法兰器件的整体热阻低18.7%,器件内部各层材料的温度分布显示铜/石墨复合物法兰在器件中的热阻占比相比铜钼法兰在器件中的热阻占比低13%,这证明使用高热导率铜/石墨复合物法兰封装提高GaN器件热扩散性能的有效性.通过对两种GaN器件热阻占比的测量与分析,发现除了封装法兰以外,热阻占比最高的是GaN外延与衬底材料之间的界面热阻,降低界面热阻是进一步提高器件热性能的关键.同时,详细阐述了使用拉曼光热技术测量GaN器件结温和热阻的原理和过程,展示了拉曼光热技术作为一种GaN器件热特性表征方法的有效性.     

Bioinspired fluorescent dihydroxyindoles oligomers

In this paper we report the desgin and synthesis of dihydroxyindoles oligomers based reversible fluorescence sensor.We find dihydroxyindoles-2-carboxylic acid derived oligmer(P-DHICA)has the highest selectivity and sensitivity for Cu^2+detection.This work provide a highly efficient,environmentally friendly biosensor for potential use in medical testing.     

Fe3O4@SiO2 nanoparticles–functionalized Cu(II) Schiff base complex with an imidazolium moiety as an efficient and eco-friendly bifunctional magnetically recoverable catalyst for the Strecker synthesis in aqueous media at room temperature

Cu(II) Schiff base complex supported on Fe₃O₄@SiO₂ nanoparticles was employed as a magnetic nanocatalyst (nanocomposite) with a phase transfer functionality for the one-pot preparation of α-aminonitriles (Strecker reaction). The desired α-aminonitriles were obtained from the reaction of aromatic or aliphatic aldehydes, aniline or benzyl amine, NaCN, and 1.6 mol% of the catalyst in water at room temperature and good to excellent yields were obtained for all substrates. The catalyst was characterized analytically and instrumentally including Fourier-transform infrared spectroscopy, X-ray diffraction, thermogravimetric, nuclear magnetic resonance, energy-dispersive X-ray spectroscopy, inductively coupled plasma spectroscopy, vibrating-sample magnetometry analysis, dynamic light scattering, Brunauer–Emmett–Teller surface area, field emission scanning electron microscopy, and transmission electron microscopy analyses. The reaction mechanism was investigated, in which the performance of the catalyst as a phase transition factor seems to be probable. The catalyst showed high activity, high turnover frequency (TOF)s, significant selectivity, and fast performance toward the Strecker synthesis. The nanocatalyst can be readily and quickly separated from the reaction mixture with an external magnet and can be reused for at least seven successive reaction cycles without significant reduction in efficiency.