Piezoelectric Nanogenerator Based on Electrospun Cellulose Acetate/Nanocellulose Crystal Composite Membranes for Energy Harvesting Application

Nanogenerators, as the typical conversion of mechanical energy to electrical energy devices, have great potential in the application of providing sustainable energy sources for powering miniature devices. In this work, cellulose acetate/cellulose nanocrystal(CA/CNC) composite nanofiber membranes were prepared by electrospinning method and then utilized to manufacture a flexible pressure-driven nanogenerator. The addition of CNC not only increased the content of piezoelectric cellulose I crystallization but also strengthened the mechanical deformation of the nanofiber membranes, which could greatly enhance the piezoelectric performance of CA/CNC composite membranes. The CA/CNC composite nanofiber membrane with 20%(mass fraction) of CNC(CA/CNC-20%) showed optimal piezoelectric conversion performance with the output voltage of 1.2 V under the force of 5 N(frequency of 2 Hz). Furthermore, the output voltage of the CA/CNC-20% nanogenerator device exhibited a linear relationship with applied impact force, indicating the great potential in pressure sensors.     

Carbohydrate-based nanostructured catalysts: applications in organic transformations

The requirement of green and sustainable materials to prepare heterogeneous catalysts has intensified for practical reasons over the past few decades. Carbohydrates are possibly the most plentiful and renewable organic materials in nature with inimitable physiochemical properties, plausible low-cost and large-scale production, and sustainability features could be exploited in the generation of nanostructured heterogeneous catalysts. This review article outlines the organic transformations catalyzed by diverse carbohydrate-based nanostructured catalysts in greener and environmentally friendly processes. Selected examples are highlighted for a variety of organic reactions exploiting the proposed catalysts’ reactivity and reusability, and interactions with the intrinsic nature of the applied carbohydrate supports; advantages and speculated challenges of the introduced catalysts are deliberated as well.     

纤维素纳米晶体手性复合材料:结构色的调控与应用

结构色在自然界中扮演了重要的角色,在昆虫外骨骼、鸟类羽毛以及植物果实中广泛分布.纤维素纳米晶体(CNCs)的水悬浮液达到一定浓度时会自组装形成左旋的手性向列液晶结构,这种手性向列结构在水分挥发后仍能保持并形成光子晶体虹彩薄膜,具有极强的手性和光子晶体的双重性质.膜内的周期性层状结构与光线产生干涉、衍射作用,表现出复杂的虹彩色.CNCs与其他材料结合所制备的CNCs手性复合材料具有良好的力学性能,在传感器、防伪以及装饰等领域具有广阔前景.本文讨论了CNCs手性复合材料的结构色调控以及在刺激响应、图案显示和圆偏振光学等方面的研究进展.     

Cellulose as recyclable organocatalyst for ipso-hydroxylation of arylboronic acids

Cellulose catalyzed oxidative hydroxylation of aryl and hetero-arylboronic acids to the corresponding phenols under metal and base free strategy has been demonstrated. The sustainable ipso-hydroxylation takes place using hydrogen peroxide as an oxidant in water under mild condition in shorter period of time. Interestingly, easy recovery and reusability of heterogeneous catalyst without significant loss in catalytic yield makes the protocol environmentally benign.     

Structural insights of a cellobiose dehydrogenase enzyme from the basidiomycetes fungus Termitomyces clypeatus

Filamentous fungi secrete various oxidative enzymes to degrade the glycosidic bonds of polysaccharides. Cellobiose dehydrogenase (CDH) (E.C.1.1.99.18) is one of the important lignocellulose degrading enzymes produced by various filamentous fungi. It contains two stereo specific ligand binding domains, cytochrome and dehydrogenase - one for heme and the other for flavin adenine dinucleotide (FAD) respectively. The enzyme is of commercial importance for its use in amperometric biosensor, biofuel production, lactose determination in food, bioremediation etc. Termitomyces clypeatus, an edible fungus belonging to the basidiomycetes group, is a good producer of CDH. In this paper we have analyzed the structural properties of this enzyme from T. clypeatus and identified a distinct carbohydrate binding module (CBM) which is not present in most fungi belonging to the basidiomycetes group. In addition, the dehydrogenase domain of T. clypeatus CDH exhibited the absence of cellulose binding residues which is in contrast to the dehydrogenase domains of CDH of other basidiomycetes. Sequence analysis of cytochrome domain showed that the important residues of this domain were conserved like in other fungal CDHs. Phylogenetic tree, constructed using basidiomycetes and ascomycetes CDH sequences, has shown that very surprisingly the CDH from T. clypeatus, which is classified as a basidiomycetes fungus, is clustered with the ascomycetes group. A homology model of this protein has been constructed using the CDH enzyme of ascomycetes fungus Myricoccum thermophilum as a template since it has been found to be the best match sequence with T. clypeatus CDH. We also have modelled the protein with its substrate, cellobiose, which has helped us to identify the substrate interacting residues (L354, P606, T629, R631, Y649, N732, H733 and N781) localized within its dehydrogenase domain. Our computational investigation revealed for the first time the presence of all three domains - cytochrome, dehydrogenase and CBM - in the CDH of T. clypeatus, a basidiomycetes fungus. In addition to discovering the unique structural attributes of this enzyme from T. clypeatus, our study also discusses the possible phylogenetic status of this fungus.     

Enhancement of thermal,mechanical and barrier properties of EVA solar cell encapsulating films by reinforcing with esterified cellulose nanofibres

Solar cell encapsulating film based on ethylene vinyl acetate copolymer (EVA) was modified by using bacterial cellulose (BC) nanofibres. Bacterial cellulose was chemically modified with propionic anhydride prior to compounding with EVA in a twin screw extruder. The effects of fibre content on the mechanical, thermal, optical and barrier properties of the EVA composite films were investigated. Better mechanical and barrier properties of the EVA films were obtained when the modified BC nanofibres were used. The results were ascribed to the different chemical functional groups on the fibre surface, as verified by FTIR spectra. Deacetylation of the EVA was delayed and visible light transparency of the EVA films above 75% was retained. Overall, our study showed that it was possible to improve the barrier properties of EVA film without sacrificing much transparency by using a suitable type and content of cellulose nanofibres.     

Investigation of melamine and DOPO-derived flame retardants for the bioplastic cellulose acetate

In order to identify suitable flame retardant additives for the eco-friendly polymer cellulose acetate (CA), high-melting derivatives of the known flame retardant 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) were combined with the thermoplastic CA and the combustion properties were tested. CA mixtures with bis-phosphonamidates (EDA-DOPO and PIP-DOPO) showed distinct flame retardation effects and a reduction of peak heat release rates (PHRR) by up to 18%. CA mixtures with MDOP, a melamine salt of DOPA (an oxidation product of DOPO), also showed considerable effects and a reduction of PHRR by up to 27%. While producing more smoke than pure CA and CA plus melamine, owing to its aromatic component, MDOP was superior to the CA mixtures with DOPO, EDA-DOPO and PIP-DOPO in this regard. The mixture of CA with melamine gave rise to a distinctly reduced formation of toxic CO and smoke when compared with pure CA. Thus, these additives can be considered for future applications of CA-based polymers with enhanced flame protection.     

Experimental and molecular simulating study on promoting electrolyte-immersed mechanical properties of cellulose/lignin separator for lithium-ion battery

Lithium-ion batteries have been developing intensively and earn an unprecedented reputation, yet advanced performance and safety issue still require considerable investigation. Separator is vital to comprehensive properties of batteries, where the mechanical properties are key to breaking through of new-type separator. Unfortunately, electrolyte submersion has caused damage to strength of cellulose separator. Whereupon, in this work, cellulose separator is optimized by introducing lignin particles to promote electrolyte-immersed mechanical strength. Experiments are conducted concerning surface morphology, contact angle, porosity, electrolyte uptake, mechanical properties and electrochemical performance. Molecular simulation is implemented to explore the mechanism of tensile behavior of cellulose and lignin subjected to electrolyte solvents. Experimental results confirm positive effect of lignin addition in improving mechanical properties and simultaneously maintaining impressive electrochemical performance of the cellulose/lignin composites separators. Besides, lignin addition amount of 2.5% and 5% is recommended to achieve promising overall properties. Molecular simulation has successfully unveiled that weakening of cellulose separator submerged in electrolyte is resulted by the deformed cellulose amorphous region and the promoting effect of adding lignin is contributed from the new hydrogen bonds generated between cellulose and lignin molecules. Hopefully, this work provides novel insight on preparing remarkable separator and mechanism of materials behavior.     

Lewis酸催化纤维素制乳酸机理研究

Because fossil fuels are continuously depleted, valorization of biomass into valuable liquid products and chemicals is of great significance yet it remains challenging. Among many biomass-derived products, lactic acid is one of the most important renewable monomers for preparing the degradable polymer polylactic acid. The use of raw biomass to produce lactic acid through catalytic conversion is an attractive approach. In this work, the catalytic reaction performance and mechanism of different Lewis acids (Y³⁺, Sc³⁺, and Al³⁺) for the production of lactic acid from cellulose were investigated in detail by isotopic nuclear magnetic resonance (NMR) and mass spectrometry. The production of lactic acid from cellulose includes tandem and competing reactions. The order of catalytic activity for the one-pot conversion of cellulose into lactic acid is as follows: Y³⁺ > Al³⁺ > Sc³⁺. The main tandem reactions involve the hydrolysis of cellulose into glucose, the isomerization of glucose into fructose (the order of catalytic activity, the same below: Y³⁺ > Al³⁺, Y³⁺ > Sc³⁺), the cleavage of fructose via a retro-aldol reaction to glyceraldehyde (GLY) and 1, 3-dihydroxyacetone (DHA) (Sc³⁺ > Y³⁺ > Al³⁺), and the conversion of DHA or GLY to the final product lactic acid (Al³⁺ > Y³⁺ > Sc³⁺). It was found that the process of glucose isomerization to fructose was the key step to the final selectivity of the tandem reaction of cellulose conversion to lactic acid, and it was clarified that the production of lactic acid from DHA underwent a keto-enol (K-E) tautomerization process rather than a classical 1, 2-shift process. First, DHA was transformed into GLY via the isomerization process, then the adjacent hydroxyl group of GLY was removed in the form of water to produce an α, β-unsaturated species. After that, the α, β-unsaturated species underwent K-E tautomerization to generate unsaturated aldehyde-ketone intermediates. Meanwhile, a molecule of water was added to aldehyde-ketone intermediates to obtain a diol product, the hydrogen atom at the methine position was transferred and the lactic acid was finally obtained through the K-E tautomerization process. The in-depth understanding of the reaction mechanism presented in this work will help to design more selective catalysts for cellulose conversion into value-added oxygen-containing small molecule chemicals.      

A Petrochemical-Free Route to Superelastic Hierarchical Cellulose Aerogel

Cellulose aerogels are plagued by intermolecular hydrogen bond-induced structural plasticity, otherwise rely on chemicals modification to extend service life. Here, we demonstrate a petrochemical-free strategy to fabricate superelastic cellulose aerogels by designing hierarchical structures at multi scales. Oriented channels consolidate the whole architecture. Porous walls of dehydrated cellulose derived from thermal etching not only exhibit decreased rigidity and stickiness, but also guide the microscopic deformation and mitigate localized large strain, preventing structural collapse. The aerogels show exceptional stability, including temperature-invariant elasticity, fatigue resistance (∼5 % plastic deformation after 10⁵ cycles), high angular recovery speed (1475.4° s⁻¹), outperforming most cellulose-based aerogels. This benign strategy retains the biosafety of biomass and provides an alternative filter material for health-related applications, such as face masks and air purification.