双激光脉冲打靶形成Gd等离子体的极紫外光谱辐射

高端芯片制造所需要的极紫外光刻技术位于我国当前面临35项"卡脖子"关键核心技术之首.高转换效率的极紫外光源是极紫外光刻系统的重要组成部分.本文通过采用双激光脉冲打靶技术实现较强的6.7 nm极紫外光输出.首先,理论计算Gd¹⁸⁺—Gd²⁷⁺离子最外层4d壳层的4p-4d和4d-4f能级之间跃迁、以及Gd¹⁴⁺—Gd¹⁷⁺离子最外层4f壳层的4d-4f能级之间跃迁对波长为6.7 nm附近极紫外光的贡献.其后开展实验研究,结果表明,随着双脉冲之间延时的逐渐增加,波长为6.7 nm附近的极紫外光辐射强度呈现先减弱、后增加、之后再减弱的变化趋势,在双脉冲延时为100 ns处产生的极紫外光辐射最强.并且,在延时为100 ns处产生的光谱效率最高,相比于单脉冲激光产生的光谱效率提升了33%.此外,发现双激光脉冲打靶技术可以有效地减弱等离子体的自吸收效应,获得的6.7 nm附近极紫外光谱宽度均小于单激光脉冲打靶的情形,且在脉冲延时为30 ns时刻所产生的光谱宽度最窄,约为单独主脉冲产生极紫外光谱宽度的1/3.同时...     

微区X射线荧光成像技术在岩心分析中的应用

微区X射线荧光（Micro-XRF）分析技术是通过微小的X射线光束照射样品，对样品进行原位成分观测的无损分析手段之一，具有灵敏度高、速度快和准确性高的特点。采用微区X射线荧光光谱仪（M6 JETSTREAM）对安徽铜陵冬瓜山铜矿床四段岩心样品进行面扫描，分析不同矿层共17种元素区域分布特征、空间分布规律及组合关系等，结果表明：（1）Cu和Fe两种成矿元素高值空间分布区域基本不重叠，S与Fe分布范围高度重叠，关系密切，微量元素Ni，Bi，Pb，Zn，Si，Na与Cu密切相关，而Ti，Al，K与Fe具有弱相关性；（2）垂向上，Fe元素含量随深度增加逐步增大，而Cu元素含量呈降低趋势，其他元素也随深度呈下降趋势；（3）元素分布受石炭纪中期海底喷流沉积成矿作用和岩浆热液成矿作用叠加改造作用明显；（4）该钻孔矿石矿物以磁黄铁矿、黄铜矿和黄铁矿为主，垂向上组合规律明显，脉石矿物以石英、石榴子石和透辉石为主。该技术通过分析元素空间分布规律、相关性以及矿物组合和分配关系等可对元素富集和运移以及对矿床的成矿机制、成因模式等地质环境和地质过程提供新认识和新证据。结合矿床地球化学特征的分布模式，微量元素可作为寻找主矿种的指示元素，为深部找矿提供依据。此外，该技术能作为预分析技术快速筛选出感兴趣的信息和位置，为后期各种更高精度的微区分析提供不同尺度、不同层次的元素分布信息。     

Low-cost automated capillary electrophoresis instrument assembled from commercially available parts

A CE instrument that can be assembled from commercially available components with minimal construction effort is described. Except for the electronic control circuitry no specially made parts are required. It is based on a flexible design of microfluidic, electropneumatic, and electronic sections and different configurations can easily be implemented. Automated injection into the capillary is performed hydrodynamically by the application of a pressure for a controlled length of time. The performance of the device was tested with a contactless conductivity detector by separating different metal ions. In addition, nine metal cations related to the quality of honey were separated in 2.3 min and four honey samples were analysed quantitatively to demonstrate the applicability of the method.     

X-ray diffraction study of mesogenic 4-methoxyphenyl-4′-n-nonyloxybenzoate

4-methoxyphenyl-4′-n-nonyloxybenzoate have been investigated by single crystal X-ray structural analysis. Crystal packing of the compounds does not represent a precursor of the mesophse although the typical for liquid crystal compounds separation of crystal packing on aromatic and aliphatic areas is observed here. Possible reason for monotropic properties are discussed.     

XANES/EPR Evidence of the Oxidation of Nickel(II) Quinolinylpropioamide and Its Application in Csp3−H Functionalization

An in situ generated oxidation species of nickel quinolinylpropioamide intermediate was produced. Characterization by X-ray absorption near edge structure (XANES) and EPR provides complementary insights into this oxidized nickel species. With aliphatic amides and isocyanides as substrates, a nickel-catalyzed facile synthesis of structurally diverse five-membered lactams could be achieved.     

Investigation on electro-catalytic oxidation properties of carbon nanotube–Ce-modified PbO2 electrode and its application for degradation of m-nitrophenol

In this work a carbon nanotube–Ce-modified PbO₂ (CNT–Ce–PbO₂) electrode was prepared by electrodeposition method, and compared with pure PbO₂, Ce–PbO₂, and CNT–PbO₂ electrodes. The direct and indirect oxidation capacities of prepared electrodes in electro-catalytic oxidation processes were investigated by cyclic voltammetry and hydroxyl radical production tests, respectively. The electro-catalytic activity of electrodes was examined by electro-catalytic oxidation of a model pollutant of m-nitrophenol (m-NP). Besides, high-performance liquid chromatography (HPLC) was also employed to identify the products resulting from the electro-catalytic oxidation of m-NP and the degradation mechanism of m-NP was proposed. Results show that the CNT–Ce–PbO₂ anode has higher direct and indirect oxidation capacities than pure PbO₂, Ce–PbO₂, and CNT–PbO₂ anodes. In the electro-catalytic oxidation of m-NP, the m-NP can be oxidized and degraded at all anodes, and the oxidation reactions of m-NP follow first-order kinetics. m-NP and TOC removal efficiencies are about 0.987 and 0.622 after electrolysis of 120 min and a maximum first-order rate constant of 0.036 min⁻¹ is achieved at the CNT–Ce–PbO₂ anode, which are obviously higher than those of the other three kinds of anodes.     

A Bifunctional Luminescent Metal–Organic Framework for the Sensing of Paraquat and Fe3+ Ions in Water

The hydrothermal reaction of Zn²⁺ ions with a mixture of two ligands, Hcptpy and H₃btc (Hcptpy=4‐(4‐carboxyphenyl)‐2,2′:4′,4′′‐terpyridine; H₃btc=1,3,5‐benzenetricarboxylic acid), led to the formation of a 3D metal–organic framework (MOF) with 1D channels, [Zn₂(cptpy)(btc)(H₂O)]_n ( 1 ), which was structurally characterized by using single‐crystal X‐ray diffraction (SXRD). In MOF 1 , two independent Zn²⁺ ions were interconnected by btc^3? ligands to form a 1D chain, whilst adjacent Zn²⁺ ions were alternately bridged by cptpy^? ligands to generate a 2D sheet, which was further linked by 1D chains to form a 3D framework with a new (3,3,4,4)‐connected topology. Furthermore, compound 1 also exhibited excellent stability towards air and water and, more importantly, luminescence experiments indicated that it could serve as a probe for the sensitive detection of paraquat (PAQ) and Fe³⁺ ions in aqueous solution.     

Growth and characterization of two-dimensional crystals for communication and energy applications

This review article covers the growth and characterization of two-dimensional (2D) crystals of transition metal chalcogenides, h-BN, graphene, etc. The chemical vapor transport method for bulk single crystal growth is discussed in detail. Top-down methods like mechanical and liquid exfoliation and bottom-up methods like chemical vapor deposition and molecular beam epitaxy for mono/few-layer growth are described. The optimal characterization techniques such as optical, atomic force, scanning electron, and Raman spectroscopy for identification of mono/few-layer(s) of the 2D crystals are discussed. In addition, a survey was done for the application of 2D crystals for both creation and deterministic transfer of single-photon sources and photovoltaic systems. Finally, the application of plasmonic nanoantenna was proposed for enhanced solar-to-electrical energy conversion and faster/brighter quantum communication devices.