超声波燃气表矩形流道的雷诺修正系数仿真研究

在超声波流量计测量技术中, 雷诺修正系数相关的研究对于提高计量精度有重要作用. 为研究矩形流道的雷诺修正系数与雷诺数的关系, 对矩形流道在常温常压流量较小情况下进行仿真, 结果发现: 矩形流道层流状态下的雷诺修正系数与雷诺数呈线性相关. 保持压强、体积流量不变, 在不同温度下进行仿真及拟合, 结果表明: 在不同温度下雷诺修正系数与雷诺数的线性关系依然满足. 在上述实验基础上, 对矩形流道湍流状态下的雷诺修正系数与雷诺数关系进行研究, 通过改变温度、压强和体积流量进行仿真及拟合发现, 矩形流道湍流状态下雷诺修正系数与雷诺数呈非线性相关.     

Three-dimensional interfacial fracture analysis of a one-dimensional hexagonal quasicrystal coating

In this paper, the three-dimensional (3D) interfacial fracture is analyzed in a one-dimensional (1D) hexagonal quasicrystal (QC) coating structure under mechanical loading. A planar interface crack with arbitrary shape is studied by a displacement discontinuity method. Fundamental solutions of interfacial concentrated displacement discontinuities are obtained by the Hankel transform technique, and the corresponding boundary integral-differential equations are constructed with the superposition principle. Green’s functions of constant interfacial displacement discontinuities within a rectangular element are derived, and a boundary element method is proposed for numerical simulation. The singularity of stresses near the crack front is investigated, and the stress intensity factors (SIFs) as well as energy release rates (ERRs) are determined. Finally, relevant influencing factors on the fracture behavior are discussed.     

Stabilized Nonconforming Mixed Finite Element Method for Linear Elasticity on Rectangular or Cubic Meshes

Based on the primal mixed variational formulation, a stabilized nonconforming mixed finite element method is proposed for the linear elasticity on rectangular and cubic meshes. Two kinds of penalty terms are introduced in the stabilized mixed formulation, which are the jump penalty term for the displacement and the divergence penalty term for the stress. We use the classical nonconforming rectangular and cubic elements for the displacement and the discontinuous piecewise polynomial space for the stress, where the discrete space for stress are carefully chosen to guarantee the well-posedness of discrete formulation. The stabilized mixed method is locking-free. The optimal convergence order is derived in the $L^2$-norm for stress and in the broken $H^1$-norm and $L^2$-norm for displacement. A numerical test is carried out to verify the optimal convergence of the stabilized method.     

AN APPROXIMATE SOLUTION WITH HIGH ACCURACY OF TRANSVERSE BENDING OF THIN RECTANGULAR PLATES UNDER ARBITRARILY DISTRIBUTED LOADS

Ritz method is an effective way widely used to analyze the transverse bending ofthin rectangular plates.Its accuracy depends completely on the basis functions selected.This paper selects the superposition of sine series with polynomials as the basisfunctions of thin rectangular plates.The calculating formulae are not only simple andeasily programmed,but also have high accuracy.Finally,two numerical results aregiven and compared with those obtained by the classical method.     

广义协调平板型矩形壳元

本文根据修正势能原理通过广义协调方法提出了一种列式简单的平板型矩形壳元ＧＣＲ２４。它在四个角点处各有六个自由度，总共二十四个自由度。作为一种极限协调元，单元的收敛性得到保证，并且不发生薄膜闭锁现象。通过标准问题的数值检验，表明本文提出的平板型矩形薄壳元是性能可靠、计算精度高的优质单元。     

热/机械载荷下功能梯度材料矩形厚板的弯曲行为

采用Reddy高阶剪切板理论，考虑材料物性参数随坐标和温度变化的特性，研究在均匀变化的温度场内功能梯度材料矩形板在面内与横向载荷共同作用下的横向弯曲问题，基于一维DQ法和Galerkin技术，给出了一对边固支，另对边任意约束时板弯曲问题的半解析解，以Si3N4/SUS304板为例考察了材料组份，温度场，面内载荷及边界约束条件等对功能梯度材料板弯曲行为的影响。     

Spline-Approximation Method Applied to Solve Natural-Vibration Problems for Rectangular Plates of Varying Thickness

The natural vibrations of anisotropic rectangular plates of varying thickness with complex boundary conditions are studied using the spline-collocation and discrete-orthogonalization methods. The basic principles of the approach are outlined. The natural vibrations of orthotropic plates with parabolically varying thickness are calculated. The results (natural frequencies and modes) obtained with different boundary conditions are analyzed __________ Translated from Prikladnaya Mekhanika, Vol. 41, No. 10, pp. 90–99, October 2005.     

BENDING SOLUTION OF A RECTANGULAR PLATE WITH ONE EDGE BUILT－IN AND ONE CORNER POINT SUPPORTED SUBJECTED TO UNIFORM LOAD

ＢＥＮＤＩＮＧ　ＳＯＬＵＴＩＯＮ　ＯＦ　Ａ　ＲＥＣＴＡＮＧＵＬＡＲ　ＰＬＡＴＥ　ＷＩＴＨ　ＯＮＥ　ＥＤＧＥ　ＢＵＩＬＴ－ＩＮ　ＡＮＤ　ＯＮＥ　ＣＯＲＮＥＲ　ＰＯＩＮＴ　ＳＵＰＰＯＲＴＥＤ　ＳＵＢＪＥＣＴＥＤ　ＴＯ　ＵＮＩＦＯＲＭ　ＬＯＡＤＸｕＱｉｌｏ...     

THE POLYNOMIAL STRESS FUNCTION SOLUTION FOR THE RECTANGULAR STRIP BENDING

In this paper, we propose some formulas for seeking a part of the particular solutions of the heavy harmonics and Tricomi equations and obtain the precise polynomial solutions of the finite-item number for rectangular strip bending problem when the intensity of the distributed load varies with the fourth power of longitudinal coordinate.     

在线振动监测与故障诊断的一种新途径

文中由应力强度因子导出含裂纹单元的刚度矩阵,从而提出了一种有限元法.将该法用于单边裂纹悬臂梁,计算了应变响应.用时域法识别了模态参数,并考虑了裂纹闭合的影响.分析了应变响应对故障的敏感度,计算结果表明,应变响应相对于位移响应而言,对故障更敏感.本文还提出了一种判别函数,该函数对于损伤检测,比现有几种判别函数更有效.最后,给出了一种在线振动监测与故障诊断新方法.