聚苯硫醚熔体的压致凝固行为

采用施加压力的方法将聚苯硫醚熔体凝固,凝固后获得的聚苯硫醚样品经过降温和卸压后在常温常压下回收. X射线衍射和差示扫描量热分析表明:约20 ms时间的快速压缩过程可以抑制熔体结晶,制备出非晶态聚苯硫醚块材,样品的表面及中心都是非晶态.非晶态聚苯硫醚的玻璃化转变温度和晶化温度分别为318和362 K.常压下的退火实验表明,非晶态聚苯硫醚在425 K等温结晶的产物为正交相晶型.压致凝固法中熔体的凝固不是靠温度变化,而是靠压力变化,样品表面和内部处在一致的温度下同时受压凝固,避免了热传导对非晶尺寸的影响,因此非常有利于获得结构均匀的大尺寸非晶态材料.     

铋化物发光玻璃中银表面等离激元对铒离子的发光增强作用

局域表面等离激元可以由自由空间的光直接激发,这也是局域表面等离激元的优点所在。研究铋化物发光玻璃中纳米银颗粒的表面等离激元对铒离子发光的增强效应、进一步的提高铋化物发光玻璃中铒离子的发光性能很有意义。首先,测量了(A)Er 3+(0.5%)Ag(0.5%):铋化物发光玻璃与(B)Er 3+(0.5%):铋化物发光玻璃样品的吸收谱,发现(A)Er 3+(0.5%)Ag(0.5%):铋化物发光玻璃在约600.0 nm处有一个较弱的宽的银表面等离激元共振吸收峰。同时发现两者都有典型的铒离子的吸收峰,它们的吸收几乎完全一样:在波峰形状、峰值强度和峰值波长等方面都很相近。测量了(A)Er 3+(0.5%)Ag(0.5%):铋化物发光玻璃和(B)Er 3+(0.5%):铋化物发光玻璃样品的激发谱,发现有位于379.0,406.0,451.0,488.0和520.5 nm的5个550.0 nm可见光的可见激发谱峰,和位于379.0,406.5,451.0,488.5,520.5,544.0,651.5和798.0 nm的8个1531.0 nm红外光的红外激发谱峰,容易指认出依次为Er 3+的4I 15/2→4G 11/2,4I 15/2→2H 9/2,4I 15/2→(4F 3/2,4F 5/2),4I 15/2→4F 7/2,4I 15/2→2H 11/2,4I 15/2→4S 3/2,4I 15/2→4F 9/2和4I 15/2→4I 9/2跃迁的吸收峰,通过测量发现(A)Er 3+(0.5%)Ag(0.5%):铋化物发光玻璃相对于(B)Er 3+(0.5%):铋化物发光玻璃样品的可见和红外激发谱的最大增强依次分别是238%和133%。最后,测量了它们的发光谱,发现有位于534.0,547.5和658.5 nm的三组可见发光峰,容易指认出依次为Er 3+的2H 11/2→4I 15/2,4S 3/2→4I 15/2,4F 9/2→4I 15/2荧光跃迁。还发现红外发光峰位于978.0和1531.0 nm,依次为Er 3+的4I 11/2→4I 15/2和4I 13/2→4I 15/2的荧光跃迁。通过测量发现(A)Er 3+(0.5%)Ag(0.5%):铋化物发光玻璃相对于(B)Er 3+(0.5%):铋化物发光玻璃样品的可见和红外发光谱的最大增强依次分别是215%和138%。对于银表面等离激元增强铒离子发光的机理,认为主要为纳米银颗粒的局域表面等离激元共振,造成金属纳米结构附近产生的局域电场的强度要远大于入射光的电场强度,从而导致了金属纳米结构对入射光产生强烈的吸收和散射,进而导致了荧光的增强;即局域表面等离子体共振局域场的场增强效应。     

Fabrication of red-emitting CaAlSiN3: Eu2+ through phosphor-in-glass approach for application in rear combination lamp

In this study, the red-emitting phosphor-in-glass (PiG) using the CaAlSiN₃: Eu²⁺ (CASN) phosphor is reported for the first time. The CASN: Eu²⁺ PiG samples with a maximum luminous flux of 25.1–29.4 for l minute at laser power of 1 W/mm² was obtained using a low-temperature glass frit and GPS furnace. Despite the increase in the phosphor from 15 to 25 wt%, the PiG produced at low temperature of 380 °C showed robust properties. Finally, the red PiG module designed for rear lamp applications maintains over 90% lumens for a minute at 350 mA and achieves an intense red light having a color temperature of 4589 K.     

Opposed type double stage cell for Mbar pressure experiment with large sample volume

ABSTRACT

A new opposed type double-stage large volume cell has been developed to compress large volume samples to more than 100?GPa (Mbar) pressure. A pair of second-stage diamond anvils is introduced into the first-stage Paris–Edinburgh press. The double-stage large volume cell allows the generation of ultrahigh pressures using a large culet diameter of the second-stage diamond anvils (diameters of 0.5–1.2?mm). Pressure generation up to 131?GPa has been achieved by using the culet diameter of 0.5?mm. Sample volume of the double-stage large volume cell can be more than ～100 times larger than that of conventional Mbar experiment using a diamond anvil cell. The double-stage large volume cell has a large opening in the horizontal plane for X-ray measurements, which is particularly suited for the multi-angle energy dispersive X-ray diffraction measurement, thus opening a new way of in situ structural determinations of amorphous materials at Mbar pressures.     

Synthesis and physical properties of highly branched perfluorinated polymers from AB and AB2 monomers

Highly branched perfluorinated aromatic polyether copolymers were prepared from the polycondensation of the AB₂ monomer, 3,5‐bis[(pentafluorobenzyl)oxy]benzyl alcohol with a variety of fluoroaryl and alkyl bromide AB comonomers. The structures and comonomer distribution of the resulting polymers were characterized in detail. ¹H NMR data from kinetic trials illustrated that perfluoroaryl AB comonomer distribution correlated to AB comonomer sterics. ¹⁹F NMR data revealed that fluorinated AB monomers and 3‐bromo‐1‐propanol AB monomers were distributed within the AB₂ polymer backbone, while longer alkyl bromide AB monomers, 6‐bromo‐1‐hexanol, were mostly distributed along hyperbranched polymer chain ends. In general, as AB comonomer incorporation increased for nonsterically hindered copolymers, thermal decomposition onset increased and glass transition temperatures decreased. The combined data demonstrated the effect of comonomer distribution and sterics on physical properties of AB₂‐based polymer systems. The resulting materials were used to cast thin polymer films for measurement of contact angle, which were shown to be directly related to comonomer content. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1880–1894     

Viscoelastic properties of ultrathin polycarbonate films by liquid dewetting

A liquid dewetting method for the determination of the viscoelastic properties of ultrathin polymer films has been extended to study thickness effects on the properties of ultrathin polycarbonate (PC) films. PC films with film thicknesses ranging from 4 to 299 nm were placed on glycerol at temperatures from below the macroscopic glass transition temperature (T_g) to above it with the dewetting responses being monitored. It is found that the isothermal creep results for films of the same thickness, but dewetted at different temperatures can be superposed into one master curve, which is consistent with the fact of PC being a thermorheologically simple material. Furthermore, the results show that the T_g of PC thin films is thickness dependent, but the dependence is weaker than the results for freely standing films and similar to literature data for PC films supported on rigid substrates. It was also found that the rubbery plateau region for the PC films stiffens dramatically, but still less than what has been observed for freely standing polycarbonate films. The rubbery stiffening is discussed in terms of a recently reported model that relates macroscopic segmental dynamics with the stiffening. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1559–1566     

挤压-堆积复合法制备As_2S_3红外硫系玻璃光子晶体光纤及其特性研究

在利用多极法优化设计光子晶体光纤结构的基础上,充分结合挤压和堆积两种方法的优点,提出了基于挤压-堆积的新型硫系光子晶体光纤制备技术,利用As2S3硫系玻璃制备了三层孔环结构光子晶体光纤.通过理论模拟分析得出了该光纤的色散特性和零色散点,测试了1 550 nm近红外光纤激光在该光纤中的传输效果和纤芯光斑能量分布,利用该光斑测试验证了该光纤在近红外的光能传输局部限制能力和光子晶体的光学初步控制现象.     

Molecular scale simulations on thermoset polymers: A review

This article reviews the field of molecular simulations of thermoset polymers. This class of polymers is of interest in applications ranging from structural components for aerospace to electronics packaging and predictive simulations of their response is playing an increasing role in understanding the molecular origin of their properties and complementing experiments in the search for tailored materials for specific applications. It focuses on modeling and simulation of the process of curing to predict the molecular structure of these polymers and their thermomechanical response by all-atom molecular dynamics simulations. Results from Monte Carlo and coarse-grained simulations are briefly summarized. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 103–122     

Small activation entropy bestows high-stability of nanoconfined D-mannitol

It has been a long-standing puzzling problem that some glasses exhibit higher glass transition temperatures(denoting high stability) but lower activation energy for relaxations(denoting low stability). In this paper, the relaxation kinetics of the nanoconfined D-mannitol(DM) glass was studied systematically using a high-precision and high-rate nanocalorimeter.The nanoconfined DM exhibits enhanced thermal stability compared to the free DM. For example, the critical cooling rate for glass formation decreases from 200 K/s to below 1 K/s; the Tg increases by about 20 K–50 K. The relaxation kinetics is analyzed based on the absolute reaction rate theory. It is found that, even though the activation energy E~*decreases,the activation entropy S~*decreases much more for the nanoconfined glass that yields a large activation free energy G~*and higher thermal stability. These results suggest that the activation entropy may provide new insights in understanding the abnormal kinetics of nanoconfined glassy systems.     

Peculiarities of melting and crystallization of n-decane in a porous glass

Melting and crystallization of n-decane embedded into porous glass with the mean pore size of about 6.4 nm were studied using acoustic and DSC methods. Smearing of the phase transitions, decrease of melting and freezing temperatures, pronounced hysteresis between melting and crystallization were revealed by both methods. In DSC measurements for the pore filling factors 70% and higher double peaks were observed upon cooling while only single peaks were present upon heating. Also a high reduction of the corresponding phase transition heats was revealed. Melting and freezing intervals determined by acoustic and DSC methods strongly differed from each other. A model which qualitatively explains the observed anomalies is proposed. It supposes the formation of liquid layers on the surface of the pores.