Improved performance of aluminum pigments encapsulated in hybrid inorganic–organic films

An organic silane acrylate resin (PMBK) was synthesized by free-radical solution polymerization using methyl methacrylate, butyl acrylate and (3-methacryloxypropyl)trimethoxysilane as monomers. Aluminum (Al) particles were then encapsulated in inorganic–organic hybrid films that were prepared by hydrolysis and condensation of PMBK and tetraethyl orthosilicate (TEOS) on the surface of Al pigments. Characterization results showed that PMBK and TEOS could simultaneously hydrolyze and condense with hydroxyl groups on the surface of the Al particles to form composite Al particles coated with inorganic–organic hybrid films. Compared with raw Al particles, the corrosion resistance and adhesive properties of paint films containing the composite Al particles were improved greatly, while the glossiness of the paint films decreased slightly, from 48.6° to 47.0°. In alkaline media (pH 11), the volume of evolved H₂ of composite Al particles was only 3.5 mL, whereas that of raw Al was 83.5 mL. The glossiness of paint films containing composite Al particles decreased by 1.66% after immersion in alkaline media for 24 h, whereas that of raw Al decreased by 14.82%. Peel-off tests of the paint films showed that the composite particles moved slightly away from the paint films. In contrast, the raw Al particles were seriously desquamated, suggesting encapsulation of hybrid films can greatly improve the adhesive properties of Al particles in paint films.     

第一性原理研究Be-S共掺杂AlN纳米片的电子结构和光学性质

基于密度泛函理论体系下广义梯度近似(GGA),利用第一性原理方法计算了Be替代Al、S替代N和Be-S共掺杂对氮化铝纳米片的电子结构和光学性质的影响.计算结果表明,掺杂改变了氮化铝纳米片的带隙,但仍显示半导体特性. Be掺杂类型对氮化铝纳米片的晶体结构影响不大,而S掺杂和Be-S共掺杂都使得氮化铝纳米片有不同程度的弯曲.同时Be-S共掺杂中S原子起到激活受主杂质Be原子的作用,使得受主能级向低能方向移动.共掺杂比单掺杂具有更高的受主原子浓度,并减小局域化程度.光学性质也发生较大改变:S原子掺杂氮化铝纳米片的介电函数虚部出现第二介电峰,Be掺杂和Be-S共掺杂使得损失谱的能量区间有所展宽,峰值降低并向高能区移动.     

Nb3Sn卢瑟福电缆复合导体稳定性分析

超高磁场全身核磁共振成像仪能显著提高信噪比和空间分辨率,有助于对病人的诊断.超导磁体是超高磁场核磁共振成像仪的基础,而导体是超导磁体设备研制的关键技术之一.设计了一种基于Nb_3Sn超导线的复合导体,本文对设计的复合导体建立一维失超传播模型,并对导体的失超传播特性进行了分析.分析结果表明:导体的最小失超能与扰动范围、扰动时长和运行电流有关;扰动能量越大,失超传播速度越快;运行电流越大,失超传播速度越快.     

具有本征低晶格热导率的硫化银快离子导体的热电性能

硫化银(Ag_2S)是一种典型的快离子导体材料,前期关于Ag_2S的研究主要集中在光电和生物等领域.最近的研究表明, a-Ag_2S具有和金属一样的良好延展性和变形能力.但是, Ag_2S的热电性能尚无公开报道.本工作合成了单相Ag_2S化合物,系统研究了其在300—600 K范围的物相变化、离子迁移特性和电热输运性质.研究发现, Ag_2S在300—600 K温度区间表现出半导体的电输运性质.由于单斜-体心立方相晶体结构转变, Ag_2S的离子电导率、载流子浓度、迁移率、电导率、泽贝克系数等性质在455 K前后出现急剧变化.在550 K, Ag_2S的功率因子最高可达5μW·cm~(–1)·K~(–2). Ag_2S在300—600 K温度区间均表现出本征的低晶格热导率(低于0.6 W·m~(–1)·K~(–1)). S亚晶格中随机分布的类液态Ag离子是导致b-Ag_2S体心立方相具有低晶格热导率的主要原因.在573 K, Ag_2S的热电优值可达0.55,与Ag_2Se, Ag_2Te, CuAgSe等已报道的Ag基快离子导体热电材料的性能相当.     

Insight into Three‐Coordinate Aluminum Species on Ethanol‐to‐Olefin Conversion over ZSM‐5 Zeolites

Commercial bioethanol can be readily converted into ethylene by a dehydration process using solid acids, such as Brønsted acidic H‐ZSM‐5 zeolites, and thus, it is an ideal candidate to replace petroleum and coal for the sustainable production of ethylene. Now, strong Lewis acidic extra‐framework three‐coordinate Al³⁺ species were introduced into H‐ZSM‐5 zeolites to improve their catalytic activity. Remarkably, Al³⁺ species working with Brønsted acid sites can accelerate ethanol dehydration at a much lower reaction temperature and shorten the unsteady‐state period within 1–2 h, compared to >9 h for those without Al³⁺ species, which can significantly enhance the ethanol dehydration efficiency and reduce the cost. The reaction mechanism, studied by solid‐state NMR, shows that strong Lewis acidic EFAl‐Al³⁺ species can collaborate with Brønsted acid sites and promote ethanol dehydration either directly or indirectly via an aromatics‐based cycle to produce ethylene.     

从头计算方法比较研究B_2Au_4,Al_2Au_4和BAlAu_4的几何和电子结构(英文)

Au/H相似性的研究是现代化学中的一个热门话题.我们从理论上报道Au/H相似的新成员:共价化合物B2Au4,离子化合物Al2Au4和BAl Au4.采用密度泛函和波函数理论方法对比研究了缺电子体系B2Au4、Al2Au4和BAl Au4的几何和电子结构.详细讨论了它们基态结构的轨道、适应性自然密度划分(Ad NDP)和电子局域函数(ELF)分析.计算结果表明稍微扭曲变形的C2B2Au4是基态结构,在这个共价化合物中含有两个B―Au―B三中心二电子(3c-2e)键.然而C3vAl+(Al Au4)-和C3vAl+(BAu4)-被研究证明是含有三个X―Au―Al三中心二电子键的类盐化合物(在Al2Au4中X=Al,BAl Au4中X=B).Al2Au4和BAl Au4是至今为止首例报道的在离子缺电子体系中含有金桥键的化合物.同时计算了B2Au4-、Al2Au4-和BAl Au4-阴离子基态结构的绝热剥离能和垂直剥离能,为实验表征提供依据.文中报道的金桥键为共价键和离子键相结合的缺电子体系提供了一个有趣的键合模式,有助于设计含有高度分散金原子的新材料和催化剂.     

Synthesis and characterization of BaGa2O4 and Ba3Co2O6(CO3)0.6 compounds in the search of alternative materials for Proton Ceramic Fuel Cell (PCFC)

BaGa₂O₄ and Ba₃Co₂O₆(CO₃)_0.6 compounds were studied as electrolyte and cathode materials for Proton Ceramic Fuel Cells (PCFC), respectively. Not only BaGa₂O₄ rapidly reacts with atmospheric H₂O and CO₂ and leads to a progressive material decomposition, but it does not present real hydration properties in normal conditions of pressure. On the other hand, the basic cobalt oxocarbonate Ba₃Co₂O₆(CO₃)_0.6 exhibits an interesting tendency for weight uptake and formation of hydrogencarbonate groups in moist heating/cooling conditions. This material was therefore considered for complementary studies in order to confirm its potential use as mixed proton-electron conductor, taking into account the ordered intergrowth of carbonates and face sharing Co-octahedra columns forming a pseudo-one-dimensional structure. Some preliminary results concerning electrochemical properties of the barium cobalt oxocarbonate as a PCFC cathode are also described and show at the moment modest performance, possibly related to a hydrated/carbonated surface layer contribution and/or the lack of electron percolation within the electrode layer.     

An Aluminum Telluride with a Terminal Al=Te Bond and its Conversion to an Aluminum Tellurocarbonate by CO2 Reduction

Facile access to dimeric heavier aluminum chalcogenides [(NHC)Al(Tipp)-μ-Ch]₂ (NHC=IiPr (1,3-diisopropyl-4,5-dimethylimidazol-2-ylidene, IMe₄ (1,3,4,5-tetramethylimidazol-2-ylidene); Tipp=2,4,6-iPr₃C₆H₂; Ch=Se, Te) by treatment of NHC-stabilized aluminum dihydrides with elemental Se and Te is reported. The higher affinity of IMe₄ in comparison with IiPr toward the Al center in [(NHC)Al(Tipp)-μ-Ch]₂ can be used for ligand exchange. Additionally, the presence of excess IMe₄ allows for cleavage of the dimers to form a rare example of a neutral multiply bonded heavier aluminum chalcogenide in the form of a tetracoordinate aluminum complex, (IMe₄)₂(Tipp)Al=Te. This species reacts with three equivalents of CO₂ across two Al−C^NHC and the Al=Te bond affording a pentacoordinate aluminum complex containing a dianionic tellurocarbonate ligand [CO₂Te]²⁻, which is the first example of tellurium analogue of a carbonate [CO₃]²⁻.     

On the Reactivity of Phosphaalumenes towards C−C Multiple Bonds

Heterocycles containing group 13 and 15 elements such as borazines are an integral part of organic, biomedical and materials chemistry. Surprisingly, heterocycles containing P and Al are rare. We have now utilized phosphaalumenes in reactions with alkynes, alkenes and conjugated double bond systems. With sterically demanding alkynes 1,2-phosphaalumetes were afforded, whereas the reaction with HCCH or HCCSiMe₃ gave 1,4-phosphaaluminabarrelenes. Using styrene saturated 1,2-phosphaalumates were formed, which reacted further with additional styrene to give different regio-isomers of 1,4-aluminaphosphorinanes. Using ethylene, a 1,4-aluminaphosphorinane is obtained, while with 1,3-butadiene a bicyclic system containing an aluminacyclopentane and a phosphirane unit was synthesized. The experimental work is supported by theoretical studies to shed light on the mechanism governing the formation of these heterocycles.     

FER分子筛中铝原子的受限落位

分子筛是一类具有规则孔道或笼状结构的多孔材料,因其独特的结构和可调的酸性而广泛用于石油化工、精细化学品合成、现代煤化工等诸多行业.2006年Iglesia等在具有8元环孔道结构/侧口袋的FER和MOR分子筛上实现了无卤素添加、无贵金属存在条件下,由二甲醚羰基化合成乙酸甲酯的反应.乙酸甲酯通过进一步加氢可实现煤基乙醇的绿色生产.MOR分子筛通常具有较高的催化活性,但失活迅速;FER分子筛表现出良好的催化稳定性,但活性较低.如何在保证FER分子筛稳定性的前提下,进一步提升其羰基化活性是目前研究的热点.前期理论和实验研究发现,二甲醚羰基化反应活性与分子筛8元环孔道中的Br?nsted酸位密度存在正相关.因此,通过优化合成条件,选择性调控铝原子分布在"ferrierite"笼中,可以提高FER分子筛的羰基化反应活性.尽管研究者已在调节FER分子筛铝分布方面进行了大量研究,但对于不同T位上Al原子的精准识别以及对应Br?nsted酸位的可接触性还缺少系统和深入的认识.本文选取了几种代表性模板剂,分别在碱性和含氟体系下制备了系列FER分子筛样品,利用Rietveld精修和模拟退火算法,在原子水平揭示了模板剂种类以及合成介质变化对Al原子在不同T位分布的影响,并结合二甲醚羰基化反应进行了结构和性能的关联.首先选取不同尺寸大小的环状胺(环己胺、哌啶、吡啶、吡咯烷)和链状胺(乙二胺)合成了具有相似形貌、孔结构、酸密度的系列FER分子筛样品.以CHA-Na-FER为例,PXRD精修结果显示,Na+(平衡35％的骨架负电荷)分布在10元环孔道中与O1形成氢键,质子化的环己胺分布在"ferrierite"笼中,并且环己胺上的N与O3形成氢键.这说明与O1相连的T3位以及与O3相连的T1位都有可能是Al富集的位置.为了进一步验证该结论,本文还精修了吸附探针分子吡啶的样品CHA-Na-FER-Py-60h.原粉以及吸附吡啶样品的精修结果表明,T1位和T3位是样品中铝富集的位置.随后,运用相同方法研究了Py-Na-FER,PI-Na-FER,En-Na-FER和Pyrr-HF-FER样品中的Al落位,发现T1/T3位均是样品中Al富集的位置.此外,理论计算结果表明T1/T3位上Al原子的取代能较低,说明Al优先取代T1/T3位上的Si,这与精修结果相一致.前期理论模拟结果表明,FER分子筛中T2-O5和T4-O7位点的CO插入反应能垒较低,是二甲醚羰基化反应的活性位.本文吡啶吸附实验、热重分析以及PXRD精修结果表明,FER分子筛中大部分Al富集在T1/T3位,与T2/T4位相关的Br?nsted酸约占18％～30％.最后,对各样品进行了二甲醚羰基化反应评价,结果显示PI-Na-FER,Py-Na-FER,En-Na-FER和CHA-Na-FER催化剂的乙酸甲酯生成速率相近,约为0.10 mol/(mol H+?h).Pyrr-HF-FER催化剂的乙酸甲酯生成速率最高,可达到0.16 mol/(mol H+?h),这可能是由于Pyrr-HF-FER催化剂具有更多T2/T4位相关的Br?nsted酸.虽然Pyrr-HF-FER催化剂的乙酸甲酯生成速率较其他四个催化剂有一定提升,但其仍远低于MOR分子筛上乙酸甲酯生成速率(0.40 mol/(mol H+·h)).综上,有机模板剂的选择与合成介质的改变对FER分子筛中Al分布的调控作用是有限的,即Al原子总是优先分布于T1/T3位.而与T1和T3位相关的Br?nsted酸位不是二甲醚羰基化反应的活性位点.因此与MOR相比,FER分子筛在二甲醚羰基化反应中表现出较低的催化活性.