含酰胺结构超低膨胀聚酰亚胺薄膜的热膨胀行为

采用联苯二酐与3种含酰胺结构二胺制备了具有不同取代基团的聚酰胺-酰亚胺薄膜, 考察了酰胺结构对薄膜力学、 耐热及尺寸稳定性的影响, 研究了聚集态结构与薄膜热膨胀行为的关系和规律. 该系列薄膜具有超高强度和优异的耐热性能, 拉伸强度高达280.5 MPa, 玻璃化转变温度在389~409 ℃, 并在30~300 ℃温度范围内表现出超低负膨胀, 热膨胀系数(CTE, ppm/℃, 即10 ⁶ cm·cm ^-1·℃ ^-1)在-3.05~-1.74 ppm/℃之间. 聚集态分析结果表明, 酰胺结构使分子链间形成了强氢键相互作用, 分子链在薄膜面内方向高度有序取向, 并在膜厚方向堆积更为紧密, 使薄膜表现出热收缩现象. 通过不同体积大小的取代基团进一步调控分子链间相互作用及排列堆积, 可实现薄膜在高温下近乎零尺寸形变, 为设计制备超低膨胀聚合物基板材料提供了新思路.     

Synthesis of Tetraarylethene Luminogens by C−H Vinylation of Aromatic Compounds with Triazenes

Tetraarylethenes are obtained by acid-induced coupling of vinyl triazenes with aromatic compounds. This new C−H activation route for the synthesis of aggregation-induced emission luminogens is simple, fast, and versatile. It allows the direct grafting of triarylethenyl groups onto a variety of aromatic compounds, including heterocycles, supramolecular hosts, biologically relevant molecules, and commercial polymers.     

Aggregation-Induced Emission by Molecular Design: A Route to High-Performance Light-Emitting Electrochemical Cells

The emission efficiency of organic semiconductors (OSCs) often suffers from aggregation caused quenching (ACQ). An elegant solution is aggregation-induced emission (AIE), which constitutes the design of the OSC so that its morphology inhibits quenching π–π interactions and non-radiative motional deactivation. The light-emitting electrochemical cell (LEC) can be sustainably fabricated, but its function depends on motion of bulky ions in proximity of the OSC. It is therefore questionable whether the AIE morphology can be retained during LEC operation. Here, we synthesize two structurally similar OSCs, which are distinguished by that 1 features ACQ while 2 delivers AIE. Interestingly, we find that the AIE-LEC significantly outperforms the ACQ-LEC. We rationalize our finding by showing that the AIE morphology remains intact during LEC operation, and that it can feature appropriately sized free-volume voids for facile ion transport and suppressed non-radiative excitonic deactivation.     

Photo-Activated Circularly Polarized Luminescence Film Based on Aggregation-Induced Emission Copper(I) Cluster-Assembled Materials

In this study, a pair of chiral copper(I) cluster-assembled materials (R/S- 2 ) was prepared, exhibiting unique photo-response characteristics with a concentration-wavelength correlation property in DMSO solution. By the combination of R/S- 2 with a polymethyl methacrylate (PMMA) matrix, the first photo-activated circularly polarized luminescence (CPL) film was developed, the CPL signal (g_lum=9×10⁻³) of which could be induced by UV light irradiation. Moreover, the film exhibited a reversible photo-response and extremely good fatigue resistance. Mechanism study revealed that the photo-response properties of the R/S- 2 solution and film are attributed to the aggregation-induced emission (AIE) characteristics of R/S- 2 and a photo-induced deoxygenation process. This study enriches the types of luminescent cluster-assembled molecules and provides a new strategy for the construction of metal cluster-based stimuli-responsive composite materials.     

Solvent Dependency of Catalyst-Substrate Aggregation Through π-π Stacking in Photoredox Catalysis

Assemblies of photoredox catalysts and their target substrates prior to photoexcitation is a phenomenon naïvely overlooked by the majority of synthetic chemists, but can have profound influences on reactivity and selectivity in photocatalytic reactions. In this study, we determine the aggregation states of triarylamine radical cationic photocatalysts with various target arene substrates in different solvents by specifically parameterized polarizable molecular dynamics simulations. A π-stacking interaction previously implicated by more expensive, less-representative quantum calculations is confirmed. Critically, this study presents new insights on: i) the ability of solvents (MeCN vs DMF) to make or break a photocatalytic reaction by promoting (MeCN) or demoting (DMF) its catalyst-substrate assemblies, which is a determining factor for reactivity, ii) the average “lifetimes” of assemblies in solution from a dynamic simulation. We find that both in the ground state and the photoexcited state, the cationic radical assemblies remain intact for periods often higher than 60 ps, rendering them ideally suitable to undergo intra-assembly electron transfer reactions upon photoexcitation. Such aspects have not addressed by previous studies on synthetic photocatalytic reactions involving non-covalent assemblies.     

利用基于Gouy-Chapman模型的离子有效电荷定量表征离子特异性效应

离子特异性效应在固-液界面反应中是普遍存在的. 近期研究指出, 在较低电解质浓度的某些体系中, 离子特异性效应可能并非来源于色散力、经典诱导力、离子半径或水合半径的大小等, 而是界面附近强电场中的离子极化作用. 这种作用可使界面附近的吸附态反号离子被强烈极化(高达经典极化的10⁴倍). 强烈极化的结果将导致离子在界面附近受到的库仑力远远超过离子电荷所能产生的库仑力, 这体现在离子的有效电荷将远大于离子的实际电荷. 因此胶体体系中基于这种强极化的离子有效电荷可以用来定量表征离子特异性效应的强度. 本研究在蒙脱石-胡敏酸混合悬液凝聚过程中发现了Na⁺、K⁺、Ca²⁺、Cu²⁺四种离子的离子特异性效应, 提出了基于激光散射技术测定离子有效电荷的方法, 并成功获得了被强烈极化后的离子有效电荷数值. 实验测得的Na⁺、K⁺、Ca²⁺、Cu²⁺四种离子的有效电荷值分别为: Z_{Na(effective)}=1.46, Z_K(effective)=1.86, Z_{Ca(effective)}=3.92, Z_{Cu(effective)}=6.48.该结果表明: (1) 离子在强电场中的极化将大大提高离子的有效电荷, 从而极大地增强离子所受的库仑作用力;(2) 离子的电子层数越多, 离子极化越强烈, 离子的有效电荷增加越多.     

Tris(Znsalen) cryptand minimizes Znsalen aggregation arising from intermolecular Zn…O interaction

Exploring the factors to control Znsalen aggregation is of importance to design functional materials in catalysis, optical materials and biological imaging. In this work, we synthesized and characterized four cryptand type triZnsalen complexes and found that cryptand structure could efficiently minimize intermolecular Zn···O interaction. More importantly, encapsulated by PLGA nanoparticles, cryptand triZnsalen 1 displayed visible intracellular fluorescence whereas monomeric Znsalen 5 could not. These results provide a new access to design new luminescent materials with the potential application in optics and biological studies.     

Silicification‐Induced Cell Aggregation for the Sustainable Production of H2 under Aerobic Conditions

Photobiological hydrogen production is of great importance because of its promise for generating clean renewable energy. In nature, green algae cannot produce hydrogen as a result of the extreme sensitivity of hydrogenase to oxygen. However, we find that silicification‐induced green algae aggregates can achieve sustainable photobiological hydrogen production even under natural aerobic conditions. The core–shell structure of the green algae aggregates creates a balance between photosynthetic electron generation and hydrogenase activity, thus allowing the production of hydrogen. This finding provides a viable pathway for the solar‐driven splitting of water into hydrogen and oxygen to develop green energy alternatives by using rationally designed cell–material complexes.