TiC-MgO composite: an X-ray transparent and machinable heating element in a multi-anvil high pressure apparatus

ABSTRACT

TiC-MgO composite was developed as a heating element for X-ray study in the multi-anvil high pressure apparatus. We synthesized TiC-MgO blocks (50–70 wt.% of TiC) by compression in a cold isostatic press followed by baking in a gas flow furnace. Heaters of tubular shape were manufactured from the synthesized blocks either by lathe or numerically controlled milling machine. The so-produced heating elements have been proved to generate temperatures up to 2250?K at 10?GPa, condition where classical graphite heaters are not suitable anymore due to graphite-diamond transition. These new heaters have been successfully used for in situ X-ray radiography and diffraction measurements on liquid Fe alloys, exploiting excellent X-ray transparency.     

Modes conversion due to plasmons induced transparency

We investigate simulated and theoretically the optical properties of the metamaterial, composed of two bigger split ring resonators and one smaller split ring resonator in unit cell. We observe the magic phenomena that one mode B is inhibited from strong to weak then disappears while another mode A appears and becomes stronger and stronger as asymmetric degree increases. The results show the mode A originates from the destructive interference between the dipole mode and the quadrapole mode, and its strength is proportional to the cross coupling coefficient of near-field. The disappearance of the mode B is due to the competition between the mode B and the mode A, and the variation of strength is proportional to the frequency shift of the dark mode. That is, with asymmetric degree increasing, the mode B converts into the mode A. These phenomena are explained very well by the temporal coupled-mode theory. Our metamaterial provides a kind of new design for understanding the interaction between light and matter.     

Effect of negative electric field on spin-dependent tunneling in double barrier semiconductor heterostructures

The effect of negative electric field on spin-dependent tunneling in double barrier heterostructures of III–V semiconductor is theoretically investigated. The transfer matrix approach is used by considering Dresselhaus and induced-Rashba effect to calculate the barrier transparency and polarization efficiency. Cent percent polarization efficiency can be achieved for the negative electric field by increasing the width of the potential barrier. The separation between spin-up and spin-down resonances are evaluated. The separation between spin resonances and tunneling lifetime of electrons are observed for various negative electric fields as well as for various barrier widths. The linear variation of spin separation and tunneling lifetime of electrons are observed as a function of negative electric field.     

Organosoluble,low dielectric constant and highly transparent fluorinated pyridine-containing poly(ether imide)s derived from new diamine: 4-(4-trifluoromethyl)phenyl-2,6-bis[4-(4-amino-2-trifluoromethylphenoxy)phenyl]pyridine

A new aromatic diamine, 4-(4-trifluoromethyl)phenyl-2,6-bis[4-(4-amino-2-trifluoromethylphenoxy)phenyl]pyridine, was synthesized by a modified Chichibabin reaction of 4-(4-nitro-2-trifluoromethylphenoxy)acetophenone with 4-triflouromethylbenzaldehyde, followed by catalytic reduction. A series of fluorinated pyridine-containing aromatic poly(ether imide)s (PEIs) were prepared from the diamine monomer with various aromatic dianhydrides via conventional two-step thermal imidization method. The resulting PEIs had inherent viscosities values of 0.68–0.90 dL/g, and could be cast and thermally converted into transparent, flexible, and tough polymer films. These PEIs were predominantly amorphous, had good solubility in common solvents such as NMP, DMAc and m-cresol at room temperature, and displayed excellent thermal stability with the glass transition temperatures of 258–315?°C, the temperatures at 5% weight loss of 550–585?°C, and the residue of higher than 55% at 750?°C in nitrogen. Moreover, the PEIs films showed outstanding mechanical properties with tensile strengths of 74.8–103.5?MPa, tensile moduli of 1.08–1.45?GPa, and elongations at break of 10.6–24.4%. These PEIs also exhibited low dielectric constants of 2.81–2.98 (1?MHz) and water uptake 0.39–0.68%, as well as high optical transparency with the UV cutoff wavelength in the 350–378?nm range and the wavelength of 80% transparency in the range of 412–510?nm.     

多个量子节点确定性纠缠的建立

量子纠缠是一种重要的量子资源,在多个空间分离的量子存储器间建立确定性的量子纠缠,然后在用户控制的时刻将所存储的量子纠缠转移到量子信道中进行信息的分发和传送,这对于实现量子信息网络是至关重要的.本文介绍了用光学参量放大器制备与铷原子D1吸收线对应的非经典光场,而且在三个空间分离的原子系综中确定性量子纠缠的产生、存储和转移.利用电磁感应透明光和原子相互作用的原理,将制备的多组分光场纠缠态模式映射到三个远距离的原子系综以建立原子自旋波之间的纠缠.然后,存储在原子系综中的纠缠态通过三个量子通道,纠缠态的量子噪声被转移到三束空间分离的正交纠缠光场.三束释放的光场间纠缠的存在验证了该系统具有保持多组分纠缠的能力.这个方案实现了三个量子节点间的纠缠,并且可以直接扩展到具有更多节点的量子网络,为未来实现大型量子网络通信奠定了基础.     

里德伯电磁感应透明中的相位

本文在典型的里德伯电磁感应透明系统中研究弱探测场在相互作用原子系统中的传播特性,重点关注基于偶极阻塞效应的探测场相位的合作光学非线性行为.通过与探测场透射率和光子关联作对比,发现相位的光学响应具有新特性:共振和Autler-Townes劈裂条件下相位对入射场强和初始光子关联不敏感,而在两者之间的频率范围内相位响应具有非线性特征,尤其在经典光频率处最显著.此外,提高主量子数和原子密度都会促进相位的非线性效应.综上,与探测场透射率和光子关联一样,相位可以作为合作光学非线性的另一个标识来刻画非线性现象,对里德伯电磁感应透明研究是一个有力的补充.     

Ideal optomechanically induced transparency generation in a cavity optoelectromechanical system

The ideal optomechanically induced transparency effects of an output probe field are investigated in a cavity optoelectromechanical system, which is composed of an optical cavity, a charged mechanical resonator, and a charged object.Although the charged mechanical resonator damping rate is nonzero, the ideal optomechanically induced transparency can still appear due to the non-rotating wave approximation effect in the system. The location of optomechanically induced transparency dip can be controlled via the Coulomb coupling strength. In addition, we find that both the transparency window width and the maximum dispersion curve slope are closely related to the optical cavity decay rate.     

High-resolution three-dimensional atomic microscopy via double electromagnetically induced transparency

We aim to present a new scheme for high-dimensional atomic microscopy via double electromagnetically induced transparency in a four-level tripod system. For atom–field interaction, we construct a spatially dependent field by superimposing three standing-wave fields(SWFs) in 3 D-atom localization. We achieve a high precision and high spatial resolution of an atom localization by appropriately adjusting the system variables such as field intensities and phase shifts. We also see the impact of Doppler shift and show that it dramatically deteriorates the precision of spatial information on 3 D-atom localization. We believe that our suggested scheme opens up a fascinating way to improve the atom localization that supplies some practical applications in atom nanolithography, and Bose–Einstein condensation.     

Direct Near Infrared Light–Activatable Phthalocyanine Catalysts

The high penetration of near-infrared (NIR) light makes it effective for use in selective reactions under light-shielded conditions, such as in sealed reactors and deep tissues. Herein, we report the development of phthalocyanine catalysts directly activated by NIR light to transform small organic molecules. The desired photocatalytic properties were achieved in the phthalocyanines by introducing the appropriate peripheral substituents and central metal. These phthalocyanine photocatalysts promote cross-dehydrogenative-coupling (CDC) under irradiation with 810 nm NIR light. The choice of solvent is important, and a mixture of a reaction-accelerating (pyridine) and -decelerating (methanol) solvents was particularly effective. Moreover, we demonstrate photoreactions under visible-light-shielded conditions through the transmission of NIR light. A combined experimental and computational mechanistic analysis revealed that this NIR reaction does not involve a photoredox-type mechanism with electron transfer, but instead a singlet-oxygen-mediated mechanism with energy transfer.     

Growth of poly(3,4‐ethylenedioxythiophene) films prepared by base‐inhibited vapor phase polymerization

Transparent [90% transmittance at 550 nm at a sheet resistance (R_s) of 279 Ω sq^?1] poly(3,4‐ethylenedioxythiophene) (PEDOT) films with electrical conductivities up to 1354 S cm^?1 are prepared using base‐inhibited vapor phase polymerization at atmospheric pressure. The influence of reaction conditions, such as temperature and growth time, on the film formation is investigated. A simple and convenient two‐electrode method is used for the in situ measurement of resistance, enabling to investigate the growth mechanism of polymer films and the influence of different parameters (relative humidity and the amount of oxidant) on the film growth. Low humidity exerts a detrimental effect on film growth and conductivity. In situ R_s measurements suggest that a large structural change occurs upon washing the PEDOT‐oxidant film. © 2014 Wiley Periodicals, Inc. J Polym Sci Part B: Polym. Phys. 2014 , 52, 561–571