Re_3W的点接触安德烈夫反射谱研究

本文通过对不同晶体结构Re_3W样品的点接触测量和对比研究,证实具有中心对称结构和非中心对称结构的Re_3W都是弱耦合Bardeen-Cooper-Schrieffer超导体,同时发现在两个相表面都可以形成很理想的点接触结,即电子通过界面时受到的非弹性散射很弱.将Re_3W样品置于大气环境近六个月后重新进行测量,仍然能够得到类似的结果,表明Re_3W具有很好的稳定性. Re_3W的这种优良特性,不仅可通过点接触实验得到的参数推算出Re_3W两个相的费米速度,而且提供了一种简单的方法,可以在点接触实验中利用Re_3W来印证针尖材料的费米速度和测量其自旋极化率等.作为尝试,本文用Re_3W/Ni点接触结测量了铁磁性金属Ni的自旋极化率,得到了与前人报道一致的结果.     

量子线/铁基超导隧道结中隧道谱的研究

考虑铁基超导中能带间的相互作用和界面对每一个能带的散射作用, 利用推广的Blonder-Tinkham-Klapwijk模型, 并通过求解Bogoliubov-de Gennes 方程研究了具有不同类型双能隙系统的量子线/铁基超导隧道结中准粒子的输运系数和隧道谱. 研究表明: 1)在弹道极限时, 随着带间相互作用的增大, s_± 波隧道谱中零偏压附近的平台演变成电导峰; s₊₊ 波的平台演变成凹陷; p波的零偏压电导峰被压低. 2)界面对两个能带的散射作用不为零时, 随着带间相互作用的增大, s_± 波和s₊₊ 波两能隙处的峰值将降低, 而两峰间的凹陷值将变大; p波的零偏压电导峰被压低, 非零偏压电导增大. 3)界面对每个能带的散射, 可使其产生的电导峰变得更加尖锐, 但可压低和抹平另一个带产生的电导峰值. 这些结果对于澄清铁基超导体的能隙结构和区别不同类型铁基超导体有所帮助.     

c轴织构1111型铁基超导体临界传输电流密的计算

采用最大网络流量模型和Ford-Fulkerson算法思想编写的Matlab程序在计算c轴织构122型铁基超导体临界传输电流密度时表现出色。变动部分参数后,该模型和计算方法也同样适用于其它铁基超导体。这里计算了c轴织构的1111型铁基超导体在不同温度和磁场下的临界电流密度Jc,并研究了材料的相对密度对Jc的影响。     

低温/高温复合超导磁体的研究进展

低温/高温复合超导体的研究是当前超导领域比较新的一个课题,文章介绍了低温/高温复合超导体的结构以及加工工艺,并结合相关数值模拟和实验结果对复合超导体电流分布、热传导性质、理论机理和稳定性研究等相关问题进行了讨论与探索。     

Alternating-current losses in two-layer superconducting cables consisting of second-generation superconductors coated by U-shaped ferromagnetic materials

Alternating-current losses in a two-layer superconducting cable, each layer being composed of 15 closely-spaced rectangular wires made up of second-generation superconductors when the ends of wires are coated by either a non-magnetic or strong ferromagnetic material having a U profile is numerically investigated. Computations are carried out through the finite-element method. The alternating-current losses do not increase significantly if the relative permeability of the coating is increased three orders of magnitude, provided that the current amplitude is less than half of the critical current in a superconducting wire. However, the losses are much higher for ferromagnetic coating if the amplitude of the applied current oscillating at 50 Hz is close to the critical current. The ferromagnetic coating is seen to accumulate the magnetic field lines normally on its surfaces, while the field lines are parallel to the long axes of the wires, leading to more significant flux penetration in the coated regions. This facilitates a uniform low-loss current flow in the uncoated regions of the wires. In contrast, coating with a non-magnetic material gives rise to a considerably smaller current flow in the uncoated regions, whereas the low-loss flow is maintained in the coated regions. Moreover, the current flows in opposite directions in the coated and uncoated regions, where the direction in each region is converse for the two materials.     

Zr掺杂对MgB2超导微观结构和超导电性的影响

将Mg粉、Zr粉和B粉按比例混合获得Mg1-xZrxB2(x=5%10%和20%),压制成型后,在流通氩气的条件下于800℃烧结2h.利用X射线衍射仪(XRD)、扫描电子显微镜(SEM)分析烧结后样品的显微结构和化学组成,采用差热分析(DTA)观察Zr掺杂对MgB2分解温度的影响,并用物性测试仪(PPMS)测试样品的超...     

Superconductivity and spin fluctuations

In the conventional superconductors, the Cooper pairs are mediated by phonons, which is a process where only the correlations between the phonons and the charge properties of the electrons are needed. However, superconductivity can also be derived from other types of elementary excitations. The spin fluctuations are arguably the most promising candidate that can mediate such unconventional superconductivity. In some of the important systems such as cuprates, Fe-based superconductors and heavy-fermion superconductors, spin fluctuations play a key role in the mechanism of their superconductivity although there are still many debates. In this paper, we will give a brief review on the correlation between the spin fluctuations and superconductivity.     

铁基超导体中的化学掺杂研究

目前已经发现的绝大部分铁基超导体都是通过化学掺杂而得到的。铁基超导体的母体一般在200K以下经历自旋密度波（SDW）转变：即其基态是一类巡游电子反铁磁不良导体。通过适当的元素替代可以在FeAs层产生额外的电子、空穴、巡游性或化学压力,从而有效地抑制SDW序,实现超导电性。本文侧重作者所在小组的相关研究结果,将铁基超导体中的元素替代研究分为FeAs层外和FeAs层内掺杂两大类,依次介绍和评述两年来国际上对4种主要铁基化合物中的化学掺杂研究进展。