新型等高仪转台运动控制系统设计

新型等高仪是一种具有特殊应用功能的高精度天体测量望远镜。在简要介绍新型等高仪及其转台运动控制系统的要求后,提出了仪器转台运动控制系统的总体设计方案。以可编程多轴运动控制器(PMAC)为核心,构建了仪器转台运动控制系统硬件,并开发了相关的控制软件。介绍了该仪器转台运动控制系统的主要硬件模块、系统配置、控制系统PID参数整定和调节方法、运动控制系统上位机和下位机的软件设计方法以及各功能的具体实现过程、系统测试和运行情况。     

扩宽OMA-Ⅵ同时谱宽的新方法

OMA－Ⅵ存在同时谱宽窄的缺点，本文用一种新方法大幅度地扩宽了它的同时谱宽，且不降低其系统分辨率，应用效果甚佳。     

岸基光电探测系统

论述两类岸基光电探测系统；岸基光电跟踪仪和岸基红外监视系统。阐述其典型实例、特点及发展方向。     

Ultrasound imaging and evaluation of lesion induced by High Intensity Focused Ultrasound

The present study was to investigate the differential imaging method for detecting HIFU (High Intensity Focused Ultrasound)-induced lesions and the estimation of variation of attenuation for lesion evaluation with log spectral difference algorithm. Experiment results of bovine muscle and liver in vitro were acquired. Several algorithms for lesion detection - Absolute Difference (AD), Sum Absolute Differences (SAD) and Sum Squared Differences (SSD) - were analyzed with several window sizes and threshold values. Then three attenuation parameters were compared to evaluate the degree of tissue damage. It was found that variation of the mean attenuation △α was an effective parameter to evaluate lesions.     

Residual stress profiling of an aluminum alloy by laser ultrasonics

A residual-stress profile along the thickness of an aluminum alloy sheet is determined by laser-ultrasonic technique. Surface acoustic waves are generated by a Nd:YAG pulse laser and detected by a Heterodyne interferometer on a lateral free surface of the sheet. The distribution of residual stress is determined by measuring the relative variation of the wavevelocities at different location of the sample along its thickness. This technique is validated by three different residual stress profiles obtained experimentally.     

用参考圆法演示简谐振动

对受迫振动仪进行了改进，通过参考圆法，演示了作镁速圆周运动的质点在直径方向上的投影所作的运动为简谐振动。     

新型测地声呐——GPY高分辨地层剖面仪

本文介绍了一种能工作于特浅水域的高分辨地层剖面仪。首先分析了国际现有产品存在的技术问题,然后阐述GPY中所采用的声学和信号处理上的新技术,最后介绍它的主要技术特点及应用效果。     

有机电致发光器件材料的椭偏研究

本文报道了用可变入射角椭圆偏振仪（Variable angle incidence Spectroscopic Ellipsometer）测量Alq3,NPB,CuPc,Rubrene薄膜的光学常数，我们采用真空蒸镀法在硅衬底上分别制备了以上四种薄膜，然后我们用可变入射角椭圆偏振仪对四种薄膜进行了测量，测量在大气中进行，光谱范围从200到1000nm（或1.24到5cV），测量角度为65℃、70℃、75℃、80℃，接着，用Wvase32软件对四种薄膜的光学常数随波长（光子能量）的变化函数进行拟合，通过拟合我们得到了真空蒸镀的Alq3,NPB,CuPc,薄膜的光学常数随波长的变化函数及曲线，并且从材料吸收谱的吸收边，我们还得到了这些材料的光学禁带宽度。     

Decomposition of the Two Lowest Lamb modes in a Bonded Plate

Based on the expression of the dispersion equation of Lame waves in an adhesive two-layered plate pressented in our proevious paper [Chin,Phys,Lett,18(2001)1483],the two lowest Lamb modes,the symmetric mode S0 and the antisymmetric mode A0 are successfully decomposed in the low-frequency regime,Relations between the rigidity of the bond and the velocity of the two Lamb modes are found,which lay a foundation for the estimation of the bond rigidity of the adhesive plate.The influence of the variations of the bond rigidity in terms of the stiffness constants KN and KT of the spring model on the velocity of the two Lamb modes in discussed and numerically evaluated.numerical results indicate that the deterioration of the bond rigidity causes the phase velocity decrease for Lamb modes of the two lowest order,thus having a possibility for the evaluation of the bonding state of the adhesive plate by using ultrasonic wave velocity measurement.     

The First Results of Supersonic Molecular Beam Injection in the HL-2A Tokamak

HL-2A tokamak, the first tokamak with divertor in China, has been constructed and put into operation in 2002. The main parameters are R=1.65 m, a=0.4 m, BT=2.8 T, Ip = 0. 48 MA. The divertor of HL-2A is unique, because it is characterized with a large closed divertor chamber. The device has double divertor chamber, but now it is operating with lower single null configuration to study the physics of divertor for the next step design of a divertor. Supersonic molecular beam injection （SMBI） system with LN2 cooling trap was first installed and demonstrated on the HL-2A tokamak in 2004. The first results of SMBI into HL-2A plasma are to demonstrate the function of the HL-2A divertor and to observe the cold pulse propagation during multi-pulse SMBI on HL-2A Tokamak.