混合/流体润滑状态下原位离子液体添加剂的摩擦学性能研究

本工作重点研究了混合/流体润滑状态下原位离子液体添加剂的摩擦学性能,选用聚乙二醇(PEG-400)作基础油,将双(三氟甲基磺酰)亚胺锂盐(Li TFSI)溶解在PEG中原位合成离子液体.利用微型牵引力试验机测量在室温、60和80℃以及不同滑滚比下摩擦系数随卷吸速度的变化,研究离子液体添加剂的有效性以及离子液体添加剂对PEG流变行为的影响.本研究中将为深入研究离子液体的润滑机理提供一种新的研究手段,对于指导设计新型离子液体润滑材料具有较为重要的意义.     

四种次磷酸盐的合成

合成了次磷酸钙、次磷酸铁、次磷酸钡、次磷酸锌4种次磷酸盐，产率依次为94.7%、 98.1%、80.6%、 60.3%，粒径2~4 μm，其结构经SEM、 IR和电感耦合等离子体原子发射光谱(ICP)确证。      

添加剂和溶剂退火协同优化制备高性能厚膜有机太阳能电池

通过溶剂添加剂1-氯萘(CN)和二硫化碳(CS₂)溶剂退火(SVA)协同优化了基于窄带隙小分子受体的厚膜活性层形貌,揭示了该策略对共混膜形貌的调控机理,研究了其对活性层中的载流子动力学以及器件光伏性能的影响.结果表明,CN添加剂可以有效促进受体材料结晶聚集,CS₂溶剂退火能够进一步提升活性层材料分子堆积的有序性,同时优化给受体材料相分离尺寸,降低共混膜表面的粗糙度,实现了良好的纳米尺寸相分离形貌.基于CN+SVA处理的PM6∶Y6厚膜(300 nm)器件的电荷传输和复合性质得到改善,取得了15.23%的光电转换效率(PCE),显著高于未经处理(PCE=11.75%)和仅用CN处理(PCE=13.48%)的光伏器件.该策略具有良好的适用性,将基于PTQ10∶m-BTP-PhC6器件的光伏性能从13.22%提升至16.92%.     

碱性电解液中K3[Fe(CN)6]在锌阳极上的自发还原和吸附延长锌镍电池的循环寿命

In view of the continuously worsening environmental problems, fossil fuels will not be able to support the development of human life in the future. Hence, it is of great importance to work on the efficient utilization of cleaner energy resources. In this case, cheap, reliable, and eco-friendly grid-scale energy storage systems can play a key role in optimizing our energy usage. When compared with lithium-ion and lead-acid batteries, the excellent safety, environmental benignity, and low toxicity of aqueous Zn-based batteries make them competitive in the context of large-scale energy storage. Among the various Zn-based batteries, due to a high open-circuit voltage and excellent rate performance, Zn-Ni batteries have great potential in practical applications. Nevertheless, the intrinsic obstacles associated with the use of Zn anodes in alkaline electrolytes, such as dendrite, shape change, passivation, and corrosion, limit their commercial application. Hence, we have focused our current efforts on inhibiting the corrosion and dissolution of Zn species. Based on a previous study from our research group, the failure of the Zn-Ni battery was caused by the shape change of the Zn anode, which stemmed from the dissolution of Zn and uneven current distribution on the anode. Therefore, for the current study, we selected K₃[Fe(CN)₆] as an electrolyte additive that would help minimize the corrosion and dissolution of the Zn anode. In the alkaline electrolyte, [Fe(CN)₆]^3– was reduced to [Fe(CN)₆]^4– by the metallic Zn present in the Zn-Ni battery. Owing to its low solubility in the electrolyte, K₄[Fe(CN)₆] adhered to the active Zn anode, thereby inhibiting the aggregation and corrosion of Zn. Ultimately, the shape change of the anode was effectively eliminated, which improved the cycling life of the Zn-Ni battery by more than three times (i.e., from 124 cycles to more than 423 cycles). As for capacity retention, the Zn-Ni battery with the pristine electrolyte only exhibited 40% capacity retention after 85 cycles, while the Zn-Ni battery with the modified electrolyte (i.e., containing K₃[Fe(CN)₆]) showed 72% capacity retention. Moreover, unlike conventional organic additives that increase electrode polarization, the addition of K₃[Fe(CN)₆] not only significantly reduced the charge-transfer resistance in a simplified three-electrode system, but also improved the discharge capacity and rate performance of the Zn-Ni battery. Importantly, considering that this strategy was easy to achieve and minimized additional costs, K₃[Fe(CN)₆], as an electrolyte additive with almost no negative effect, has tremendous potential in commercial Zn-Ni batteries.     

高效液相色谱-电喷雾检测器法测定香精香料中甜蜜素的含量北大核心CSCD

香精香料是食品添加剂中的一个重要组成部分,由人工调配混合而成,其中含有2种或2种以上的香料,一般由天然提取香料、化学试剂、合成香料、甜味剂等多种成分构成[1]。随着香精香料使用范围的不断扩大,人们对香精香料质量控制等问题的关注度越来越高[2]。目前,为加强食品添加剂的规范生产经营,国家标准GB2760-2014《食品安全国家标准食品添加剂使用标准》对一些易滥用食品添加剂进行了严格的限量规定[3]。     

电解铜箔表面电沉积Zn-Ni-P-La合金工艺

为了缓解我国高性能铜箔依靠进口的局面,进行了将类金属(P)和稀土金属(La)引入电解铜箔锌镍合金镀层中以获得高耐腐蚀性铜箔的实验。 利用电子能谱(XPS)、X射线衍射(XRD)、扫描电子显微镜(SEM)等技术手段分析镀层质量。 在最佳工艺下获得非晶态Zn-Ni-P-La合金镀层,镀层表面平整均匀、结晶致密,未钝化的情况下,铜箔镀件在180 ℃烘箱中保持1 h不变色,表现出较理想的抗氧化和抗腐蚀能力。 表明镀层中适量的P和稀土La对改善镀层质量有着重要的作用,具有较好的工业应用前景。     

1μm C18固定相的制备及在手性加压毛细管电色谱中的应用

制备了粒径为1μm的无孔C18固定相,并将其应用在手性加压毛细管电色谱中用以分离对映体。以改良的Stber法先合成粒径为1μm的无孔二氧化硅微球,后采用二次硅烷化方法制备出1μm C18固定相。以加压毛细管电色谱为平台,通过考察影响分离的各因素,确定了最佳拆分条件:乙腈/5 mmol/L pH 4.0乙酸铵缓冲液(20/80,v/v),羧甲基-β-环糊精(CM-β-CD)浓度15 mmol/L,泵流速0.03 mL/min,分离比约300∶1,施加电压2kV。本研究采用的二次硅烷化方法提高了C18的键合量。和毛细管液相色谱相比,4种药物在加压毛细管模式下有更好的分离效果,柱效最高为19万理论塔板数/m。盐酸安非他酮、盐酸克伦特罗、酒石酸美托洛尔、盐酸艾司洛尔对映体的分离度分别为1.55、2.82、1.69、1.70。该研究为手性流动相添加剂法在加压毛细管电色谱中的应用以及微米级填料在手性色谱中的应用提供了新的思路。     

新型潜香化合物3,6-二甲基-2,5-吡嗪二甲酸二薄荷醇酯的热裂解产物

为开发新型高温释放型烟用香料,以2,3,5,6-四甲基吡嗪和薄荷醇为原料,经过酯化反应制备了3,6-二甲基-2,5-吡嗪二甲酸二薄荷醇酯(DPAME)。采用在线热裂解-气相色谱-质谱联用技术(Py-GC-MS)在空气氛围和不同的温度(300、600和900℃)下,对DPAME进行热裂解研究,裂解产物经GC-MS进行了定性和半定量分析。结果表明,DPAME在300℃下裂解产生了多种有致香效果的醛类、薄荷烯和薄荷醇等;在600℃和900℃下裂解产生了烯烃类、烷基吡嗪、薄荷醇和薄荷烯等香味物质,并且吡嗪类的种类和相对含量在这两个温度下明显增加。结合DPAME的热裂解产物分析和卷烟感官评吸结果,初步推测了其可能的裂解机理。采用该方法可以方便、快速地分离鉴定物质的热裂解产物,为该物质在烟草中的加香应用提供理论依据。