单层MXene纳米片Ti2N电磁特性的过渡金属(Sc、V、Zr)掺杂效应

二维材料MXene纳米片由于具有较大的比表面积和较高的电子迁移率而受到广泛的关注。本文采用基于密度泛函理论的第一性原理计算,对单层MXene纳米片Ti₂N电磁特性的过渡金属(Sc、V、Zr)掺杂效应进行了系统研究。结果表明,所有过渡金属掺杂体系结合能均为负值,结构均稳定;其中Ti₂N-Sc体系的形成能为-2.242 eV,结构更易形成,且保持稳定;掺杂后Ti₂N-Sc、Ti₂N-Zr体系磁矩增大;此外,Ti₂N-Sc体系中保留了较高的自旋极化率,达到84.9%,可预测该体系在自旋电子学中具有潜在的应用价值。     

基于DIS数字信息化系统对透光物质透光性能的研究

采用DIS数字信息化系统,对不同浓度的蓝墨水溶液在激光光源照射下的透射平均照度及照度分布图像进行实验研究,得到了平均照度值随溶液浓度变化的规律。对不同颜色塑料膜片对白炽灯光源透过照度值及照度分布图像进行实验研究得到及其相关之规律。     

多级离散小波变换的高效超大规模集成架构

设计了一种单时钟域内低级展开、高级折叠的多级离散小波变换架构;采用横向三输入扫描方式,基于9/7离散小波变换提升算法,设计第1级离散小波变换模块;根据第2级离散小波变换的时钟周期与有效输入数据之比,设计半折叠的第2级离散小波变换模块;将第3级及更高级的离散小波变换的架构折叠到第2级离散小波变换架构上,从而降低了硬件资源的消耗。结果表明:对于大小为512 pixel×512 pixel的经3级离散小波变换处理的输入图像,所提架构的硬件效率比其他现有架构提高了57.1%以上。     

离子对反相高效液相色谱法同时测定尿液中复方α-酮酸片的5种有效成分

建立了同时测定尿液中复方α-酮酸片5种有效成分(消旋羟蛋氨酸钙(HMACa)、酮缬氨酸钙(KVCa)、消旋酮异亮氨酸钙(KILCa)、酮亮氨酸钙(KLCa)和酮苯丙氨酸钙(KPACa))的离子对反相高效液相色谱法。分别考察了离子对试剂浓度、缓冲盐浓度和流动相pH值等参数对分离情况的影响。最终采用Waters Symmetry C18色谱柱(250 mm×4.6 mm,5μm);以乙腈和含15 mmol/L四丁基氢氧化铵的20 mmol/L磷酸盐缓冲液(pH 7.0)为流动相进行梯度洗脱,流速为1.0 mL/min;柱温为35℃;检测波长为210 nm。在上述条件下,5种有效成分得到很好的分离,并且不受尿液中内源性基质的干扰,在20~200 mg/L范围内线性关系良好(r≥0.999 0);HMACa、KVCa、KILCa、KLCa和KPACa的检出限(S/N=3)分别为3.0、5.0、3.6、5.7和2.5 mg/L;定量限(S/N=10)分别为9.6、16.7、12.0、19.0和8.3 mg/L;日间、日内精密度均小于7%;平均回收率在86.79%~112.00%之间,RSD小于9%(n=5)。该方法准确,灵敏度高,重现性好,适用于尿液中这5种有效成分的检测。     

CoP纳米片制备及其电催化产氢性能的研究

高稳定性的催化剂对于规模化电催化产氢起着关键的作用.因此,采用简单的方法合成CoP纳米片,其表现出优越电催化活性和稳定性. CoP纳米片采用水热法和在氩气中磷化法制备的,纳米片的厚度为100～300 nm.CoP纳米片在0.5 M H2SO4的电解质中,表现出良好的电化学产氢性能,起始过电为～75 mV,塔菲尔斜率为～39. 67 mV/decade,当电流密度为10 mA· cm-2,过电压为～125 mV,经过1000次的循环后,保持良好的稳定性能.     

基于NiCo2O4纳米片电极的非对称混合电容器

The looming global energy crisis and ever-increasing energy demands have catalyzed the development of renewable energy storage systems. In this regard, supercapacitors (SCs) have attracted widespread attention because of their advantageous attributes such as high power density, excellent cycle stability, and environmental friendliness. However, SCs exhibit low energy density and it is important to optimize electrode materials to improve the overall performance of these devices. Among the various electrode materials available, spinel nickel cobaltate (NiCo₂O₄) is particularly interesting because of its excellent theoretical capacitance. Based on the understanding that the performances of the electrode materials strongly depend on their morphologies and structures, in this study, we successfully synthesized NiCo₂O₄ nanosheets on Ni foam via a simple hydrothermal route followed by calcination. The structures and morphologies of the as-synthesized products were characterized by X-ray diffraction, scanning electron microscopy, and Brunauer-Emmett-Teller (BET) surface area analysis, and the results showed that they were uniformly distributed on the Ni foam support. The surface chemical states of the elements in the samples were identified by X-ray photoelectron spectroscopy. The as-synthesized NiCo₂O₄ products were then tested as cathode materials for supercapacitors in a traditional three-electrode system. The electrochemical performances of the NiCo₂O₄ electrode materials were studied and the area capacitance was found to be 1.26 C·cm^-2 at a current density of 1 mA·cm^-2. Furthermore, outstanding cycling stability with 97.6% retention of the initial discharge capacitance after 10000 cycles and excellent rate performance (67.5% capacitance retention with the current density from 1 to 14 mA·cm^-2) were achieved. It was found that the Ni foam supporting the NiCo₂O₄ nanosheets increased the conductivity of the electrode materials. However, it is worth noting that the contribution of nickel foam to the areal capacitance of the electrode materials was almost zero during the charge and discharge processes. To further investigate the practical application of the as-synthesized NiCo₂O₄ nanosheets-based electrode, a device was assembled with the as-prepared samples as the positive electrode and active carbon (AC) as the negative electrode. The assembled supercapacitor showed energy densities of 0.14 and 0.09 Wh·cm^-3 at 1.56 and 4.5 W·cm^-3, respectively. Furthermore, it was able to maintain 95% of its initial specific capacitance after 10000 cycles. The excellent electrochemical performance of the NiCo₂O₄ nanosheets could be ascribed to their unique spatial structure composed of interconnected ultrathin nanosheets, which facilitated electron transportation and ion penetration, suggesting their potential applications as electrode materials for high performance supercapacitors. The present synthetic route can be extended to other ternary transition metal oxides/sulfides for future energy storage devices and systems.     

质子辐照硼硅酸盐玻璃盖片的物理效应分析

作为航天器电源系统的重要组成部分,太阳电池需要更高的转换效率和可靠性以及更长的使用寿命。通过在太阳电池表面覆盖抗辐照玻璃盖片,可以增强太阳电池对粒子辐射的防护,延长太阳电池的服役寿命,使航天器获得可靠的能源供应。硼硅酸盐玻璃就是一种理想的太阳电池玻璃盖片材料。采用蒙特卡罗方法,结合SRIM软件模拟研究质子辐照硼硅酸盐玻璃的损伤物理机理。基于粒子与物质相互作用的理论以及基本公式,通过分析不同入射能量的质子在硼硅酸盐玻璃中的阻止本领、电离能损、位移能损、空位的产生情况,对辐照损伤的物理机制进行研究。结果表明:能量为30~120 keV的质子辐照损伤主要发生在硼硅酸盐玻璃表面;质子沉积、空位分布等均为Bragg峰型分布;电离能损是能量损失的主要部分,随入射能量的增加而增大,导致电子的电离和激发;位移能损在玻璃内部随能量降低而增大,导致硼、氧和硅等空位缺陷的产生;电离效应和缺陷的产生是硼硅酸盐玻璃色心形成的重要原因。     

SnSxSe2-x单晶纳米片的可控制备与表征

锡二硫族化合物可以通过改变硫和硒的含量来连续调控三元合金材料的带隙、载流子浓度等物理化学性质,在电子和光电子器件应用上具有巨大的潜力。本文采用化学气相沉积(CVD)技术可控地制备了不同元素组分的SnS_xSe_2-x(x=0,0.2,0.5,0.8,1.0,1.2,1.5,1.8,2.0)单晶纳米片。采用扫描电子显微镜(SEM)、原子力显微镜(AFM)、能量色散X射线光谱(EDS)、透射电子显微镜(TEM)以及拉曼光谱等手段对SnS_xSe_2-x纳米片进行了综合表征。结果表明本方法成功实现了元素百分比可调的SnS_xSe_2-x单晶纳米片的可控制备。重点研究了依赖于元素百分比的SnS_xSe_2-x的拉曼特征谱,实验结果与基于密度泛函理论(DFT)的第一性原理计算得到的SnS_xSe_2-x的拉曼仿真谱高度吻合,理论计算结果较好地诠释了实验拉曼光谱发生变化的原因。本研究提供了一种元素百分比可调的三元SnS_xSe_2-x单晶纳米片的可控制备方法,同时对锡二硫族化合物的明确、无损识别提供了方案。