数学定理教学的“转识成智”——以初中“垂径定理”起始课为例北大核心

1问题提出重视定理教学“过程”是核心素养培养的必然要求,也获得了中小学数学教师的广泛赞同,但有些“过程”却事与愿违.以初中“垂径定理”的教学为例,很多教师并没有关注到这是“圆”章节的起始定理,直接让学生沿直径翻折圆形纸片,得出圆的轴对称性,并用动态课件验证(环节1);继而形式化分析证明圆的轴对称性,由此得到“垂径定理”(环节2).     

非线性玻尔兹曼方程的傅里叶谱方法

玻尔兹曼方程作为空气动理学中最基本的方程之一,是连接微观牛顿力学和宏观连续介质力学的重要桥梁.该方程描述了一个由大量粒子组成的复杂系统的非平衡态时间演化:除了基本的输运项,其最重要的特性是粒子间的相互碰撞由一个高维,非局部且非线性的积分算子来描述,从而给玻尔兹曼方程的数值求解带来非常大的挑战.在过去的二十年间,基于傅里叶级数的谱方法成为了数值求解玻尔兹曼方程的一种很受欢迎且有效的确定性算法.这主要归功于谱方法的高精度及它可以被快速傅里叶变换加速的特质.本文将回顾玻尔兹曼方程的傅里叶谱方法,具体包括方法的导出,稳定性和收敛性分析,快速算法,以及在一大类基于碰撞的空气动理学方程中的推广.     

旋转对爆炸成型杆式侵彻体毁伤威力的影响

为进一步提高周向多爆炸成型侵彻体战斗部的毁伤效能，结合数值模拟方法，设计了一种爆炸成型杆式侵彻体战斗部。基于复合装药的爆轰加载控制方式，使得药型罩成型为密实的杆式侵彻体，通过调整半预制药型罩的斜置角度，对毁伤元的旋转速度施加控制，进而提高其空中飞行姿态的稳定性，提高毁伤元的毁伤威力。对不同斜置角度的战斗部原理样机进行了静爆实验，实验结果与模拟结果的对比表明，半预制药型罩斜置角度为1.5°时，爆炸成型杆式侵彻体的着靶姿态最好，对45钢靶板侵彻深度最大。通过药型罩斜置，在保证杆式侵彻体成型质量的同时，可以有效提高侵彻体的侵彻威力。     

基于NiCo2O4纳米片电极的非对称混合电容器

The looming global energy crisis and ever-increasing energy demands have catalyzed the development of renewable energy storage systems. In this regard, supercapacitors (SCs) have attracted widespread attention because of their advantageous attributes such as high power density, excellent cycle stability, and environmental friendliness. However, SCs exhibit low energy density and it is important to optimize electrode materials to improve the overall performance of these devices. Among the various electrode materials available, spinel nickel cobaltate (NiCo₂O₄) is particularly interesting because of its excellent theoretical capacitance. Based on the understanding that the performances of the electrode materials strongly depend on their morphologies and structures, in this study, we successfully synthesized NiCo₂O₄ nanosheets on Ni foam via a simple hydrothermal route followed by calcination. The structures and morphologies of the as-synthesized products were characterized by X-ray diffraction, scanning electron microscopy, and Brunauer-Emmett-Teller (BET) surface area analysis, and the results showed that they were uniformly distributed on the Ni foam support. The surface chemical states of the elements in the samples were identified by X-ray photoelectron spectroscopy. The as-synthesized NiCo₂O₄ products were then tested as cathode materials for supercapacitors in a traditional three-electrode system. The electrochemical performances of the NiCo₂O₄ electrode materials were studied and the area capacitance was found to be 1.26 C·cm^-2 at a current density of 1 mA·cm^-2. Furthermore, outstanding cycling stability with 97.6% retention of the initial discharge capacitance after 10000 cycles and excellent rate performance (67.5% capacitance retention with the current density from 1 to 14 mA·cm^-2) were achieved. It was found that the Ni foam supporting the NiCo₂O₄ nanosheets increased the conductivity of the electrode materials. However, it is worth noting that the contribution of nickel foam to the areal capacitance of the electrode materials was almost zero during the charge and discharge processes. To further investigate the practical application of the as-synthesized NiCo₂O₄ nanosheets-based electrode, a device was assembled with the as-prepared samples as the positive electrode and active carbon (AC) as the negative electrode. The assembled supercapacitor showed energy densities of 0.14 and 0.09 Wh·cm^-3 at 1.56 and 4.5 W·cm^-3, respectively. Furthermore, it was able to maintain 95% of its initial specific capacitance after 10000 cycles. The excellent electrochemical performance of the NiCo₂O₄ nanosheets could be ascribed to their unique spatial structure composed of interconnected ultrathin nanosheets, which facilitated electron transportation and ion penetration, suggesting their potential applications as electrode materials for high performance supercapacitors. The present synthetic route can be extended to other ternary transition metal oxides/sulfides for future energy storage devices and systems.     

极端工况双矩形腔静压推力轴承动态特性

静压推力轴承动态特性受润滑油黏度、油膜厚度和油腔面积等因素影响, 极端工况运行过程中经常承受阶跃载荷或正弦载荷作用, 突加载荷将导致静压推力轴承动态特性改变, 表现为轴承的抗冲击能力和恢复平衡所需时间的变化. 为获得高速重载微间隙极端工况条件下双矩形腔静压推力轴承动态特性, 分别在不同油膜厚度、不同润滑油黏度以及不同油腔尺寸条件下对双矩形腔静压推力轴承的动态性能进行理论分析, 探讨了阶跃载荷作用下润滑油黏度、油膜厚度和油腔面积对轴承动态性能的影响, 揭示了油膜动态变化规律, 探究了正弦载荷作用下双矩形腔静压推力轴承的稳定性. 结果表明: 润滑油黏度、油膜厚度和油腔尺寸变化对其动态性能有很大的影响. 润滑油黏度越大、油膜厚度越小、油腔面积越大突加载荷作用下润滑油膜抵抗冲击的能力越强, 旋转工作台受到突加外力作用下恢复至平衡状态所用时间越短. 双矩形腔静压推力轴承油膜具有较大的阻尼系数, 轴承具有极强的抵抗正弦加载作用的能力      

四方体MgO的制备及对有机染料的吸附

以六水氯化镁和六次甲基四胺为原料,采用水热法合成四方体MgO,考察其对有机染料甲基橙和亚甲基蓝的吸附行为.通过TGA-DTA、SEM、XRD、N2-sorption和FT-IR等手段表征样品.结果表明,原料浓度、温度和表面活性剂对四方体MgO结构的形成影响较小,而反应时间的延长有助于有序结构的组装.温度170℃、时间24h、MgCl2·6H2O与C6H12N4浓度比为1∶2和表面活性剂PVP是制备四方体MgO的最佳条件.在溶液浓度10mg · L-1的单一吸附实验过程中,四方体MgO对甲基橙和亚甲基蓝的去除率分别为91.3;和22.3;,吸附过程均为单层吸附且符合Langmuir等温吸附模型和伪二级吸附动力学方程.在溶液浓度40 mg·L-1、甲基橙和亚甲基蓝浓度比3∶1的混合溶液吸附过程中,四方体MgO对甲基橙和亚甲基蓝的去除率分别为80.1;和97.9;.     

八元瓜环对氯化矢车菊素溶解性、稳定性及抗氧化性的影响

采用核磁共振氢谱(¹H NMR)、 红外光谱及紫外吸收光谱等方法考察了八元瓜环(Q[8])对氯化矢车菊素(Cy)的包结作用. 结果表明, 在pH=0.8的盐酸介质中, Q[8]可与Cy形成摩尔比为1:1的主客体配合物, 紫外吸收光谱法测得的主-客体结合常数为1.51×10⁶ . 相溶解度研究结果表明, Q[8]能使饱和Cy溶液的溶解度增大, 当Q[8]浓度为100 μmol/L时, 可使Cy的溶解度增大12.21倍. 紫外吸收光谱随时间变化结果表明, 在较为稳定存在形态及相同实验条件下, Q[8]/Cy溶液比Cy溶液的稳定性提高了2.58倍. 抗氧化性实验结果表明, Q[8]/Cy包合物和Cy均表现出较好的抗氧化活性.     

含分布时滞的时滞微分系统多步龙格-库塔方法的时滞相关稳定性

本文研究了一类含分布时滞的时滞微分系统的多步龙格-库塔方法的稳定性.基于辐角原理，本文给出了多步龙格-库塔方法弱时滞相关稳定性的充分条件，并通过数值算例验证了理论结果的有效性.     

聚甲醛结晶过程的流变学方法探索

使用流变学方法小振幅振荡剪切跟踪了聚甲醛降温结晶和升温熔融的动力学过程,结果表明流变学方法也是测定结晶、熔融温度的有效手段.转变温度可由动态储能模量的起始偏折点进行标识;而对于恒温结晶过程,流变学方法可由动态储能模量对时间的演进得到结晶过程中的相对结晶度,进而使用Avrami方程拟合获取结晶动力学参数,还可将结晶过程视为物理凝胶化过程而使用凝胶化时间标示结晶过程的快慢.