基于XPS对硫铁矿去除SeO2-3的机理研究

硒是动植物及人体生长必需的十五种微量元素之一，具有清除体内自由基、抗氧化、增强免疫力等功能，但其安全剂量的范围却很窄。利用扫描电子显微镜（SEM）和X射线衍射仪（XRD）对湿法球磨制备的硫铁矿形貌进行了表征。SEM观测发现加乙醇助磨后的硫铁矿为粒径大小较均匀的球形颗粒团聚体，粒径范围在17～200 nm之间，平均粒径138 nm。XRD衍射图谱中的特征峰与FeS₂衍射图谱中各峰位置基本一致，因此判定硫铁矿中主要化学组分为FeS₂，且图谱中基本没有杂峰，表明制备过程中并未混入杂质，样品纯度较高。实验结果表明，该法制备的硫铁矿具有颗粒粒径小、比表面积大、反应活性高等优点。研究中利用X射线光电子能谱仪（XPS）对硫铁矿去除水体中SeO2-₃的机理进行了研究。研究结果表明, （1）在较为广泛的实验pH范围（pH 2.2～11.5），硫铁矿均能有效去除水体中SeO2-₃，去除效率（除pH值7.8以外）均达到90%以上；（2）硫铁矿与SeO2-₃发生反应后，其主要组成元素的XPS特征峰结合能有所减小，表明硫铁矿表面发生了一定化学变化；（3）酸碱环境下硫铁矿去除SeO2-₃的机理不完全相同，酸性环境下，硫铁矿对SeO2-₃的去除是单纯的氧化还原过程，即硫铁矿中被酸活化的S2-₂将SeO2-₃还原为单质Se(0)，并且酸性越强，SeO2-₃去除效果越好；碱性环境下，SeO2-₃的去除过程中氧化还原与络合反应并存，硫铁矿表面有络合态Fe(OH)SeO₃和单质Se(0)两种存在形态，且碱性越强，络合态Fe(OH)SeO₃含量越高。以上研究结果为硫铁矿去除固定水体和土壤中以SeO2-₃为代表的可变价金属阴离子提供重要理论依据和应用基础。     

Insights into the efficient charge separation over Nb2O5/2D-C3N4 heterostructure for exceptional visible-light driven H2 evolution

Two-dimensional carbon nitride(2 D-C₃ N₄)nanosheets are promising materials in photocatalytic water splitting,but still suffer from easy agglomeration and fast photogene rated electron-hole pairs recombination.To tackle this issue,herein,a hierarchical Nb₂ O₅/2 D-C₃ N₄ heterostructure is precisely constructed and the built-in electric field between Nb₂O₅ and 2 D-C₃ N₄ can provide the driving force to separate/transfer the charge carriers efficiently.Moreover,the strongly Lewis acidic Nb₂O₅ can adsorb TEOA molecules on its surface at locally high concentrations to facilitate the oxidation reaction kinetics under irradiation,resulting in efficient photogene rated electrons-holes separation and exceptional photocatalytic hydrogen evolution.As expected,the champion Nb₂O₅/2 D-C₃N₄ heterostructure achieves an exceptional H2 evolution rate of 31.6 mmol g^-1 h^-1,which is 213.6 times and 4.3 times higher than that of pristine Nb₂O₅ and2 D-C₃N₄,respectively.Moreover,the champion heterostructure possesses a high apparent quantum efficiency(AQE)of 45.08%atλ=405 nm and superior cycling stability.Furthermore,a possible photocatalytic mechanism of the energy band alignment at the hetero-interface is proposed based on the systematical characterizations accompanied by density functional theory(DFT)calculations.This work paves the way for the precise construction of a high-quality heterostructured photocatalyst with efficient charge separation to boost hydrogen production.     

基于抛光基材的热蒸镀铜箔生长高平整单层石墨烯薄膜

在石墨烯的化学气相沉积工艺中,铜箔是决定石墨烯薄膜质量的重要因素。传统铜箔由于制备工艺的限制,存在大量的缺陷,导致石墨烯薄膜的成核密度较高。本工作选用抛光铝板、抛光不锈钢板、微晶玻璃和SiO₂/Si作为基材,用热蒸镀法制备了不同粗糙度的铜箔,并详细讨论了以该系列铜箔生长高平整度石墨烯薄膜的条件及铜箔对石墨烯薄膜品质的影响。实验结果表明,铜箔以(111)取向为主,与基材分离后,表面具有纳米级平整度。在生长石墨烯后,从SiO₂/Si剥离的铜箔成核密度是4种基材中最小的。同时,从SiO₂/Si剥离的铜箔晶体结构变化最不明显,具有良好的结晶性,表面几乎不存在铜晶界缺陷。当压强为3 000 Pa,氢气和甲烷流速分别为300 mL/min和0.5 mL/min时,可以获得约1 mm横向尺寸的石墨烯单晶晶畴。     

发光铱(Ⅲ)配合物抗肿瘤活性研究及应用

铱(Ⅲ)配合物因其发光量子产率高且波长易调控、发光寿命长和光稳定性好的特点,在发光材料领域备受关注。铱(Ⅲ)配合物细胞渗透能力强,能靶向多种细胞组织并影响其结构和功能,表现出独特的抗肿瘤活性,是目前金属抗肿瘤药物特别是PDT光敏剂方向的研究热点。本文重点关注铱(Ⅲ)配合物的结构对其发光性能与抗肿瘤性能的影响,综述了近期铱(Ⅲ)配合物在生物成像、探针与传感、抗肿瘤诊疗等领域的研究进展,并对目前研究中存在的问题及其应用前景进行探讨和展望。     

水热法制备二氧化锡/钨酸铋复合光催化材料及其催化活性研究

本文用水热法制备了正交晶系的纳米球状结构的二氧化锡和正交晶系的由片状聚集成球状结构的钨酸铋,并且对二者进行了复合,制备出了二氧化锡/钨酸铋复合光催化材料。采用X射线衍射(XRD)、扫描电子显微镜(SEM)、比表面积测试仪(BET)、紫外可见分光光度计等技术对复合样品的结构、形貌、比表面积、孔容孔径和光学性质进行了表征。用碘钨灯模拟太阳光,分别以二氧化锡、钨酸铋和二氧化锡/钨酸铋复合材料为催化剂降解罗丹明B(RhB),研究所制备的二氧化锡/钨酸铋复合材料的光催化活性。光催化90 min时二氧化锡、钨酸铋和二氧化锡/钨酸铋对罗丹明B的降解率分别是9%、22%和30%。实验结果表明,在可见光下,二氧化锡/钨酸铋复合材料的光催化活性要高于单一的二氧化锡和钨酸铋。     

碳纳米管膜的高温纯化研究

为了获得纯度更高的碳纳米管膜, 保证材料发热稳定性, 需要对通过化学气相沉积法得到的碳纳米管膜进行二次纯化. 通过使用高温纯化炉, 在真空状态下, 从1700℃到3200℃分7挡温度对碳纳米管进行纯化, 并对其含碳量和方块电阻进行比较. 结果表明, 高温纯化后的碳纳米管膜含碳量从95.0%提高到99.9%, 解决了含碳量低的问题. 同时, 在高温纯化中发现碳纳米管膜方块电阻从纯化前3Ω降低到0.5Ω, 方块电阻的降低对碳纳米管膜具有十分重要的意义, 同样对碳纳米管膜后续产品的开发也有重要作用.     

Best Proximity Point Theorems for p-Proximalα-η-β-Quasi Contractions in Metric Spaces with w0-Distance

In this paper,we propose a new class of non-self mappings called p-proximalα-η-β-quasi contraction,and introduce the concepts ofα-proximal admissible mapping with respect toηand(α,d)regular mapping with respect toη.Based on these new notions,we study the existence and uniqueness of best proximity point for this kind of new contractions in metric spaces with w;-distance and obtain a new theorem,which generalize and complement the results in[Ayari,M.I.et al.Fixed Point Theory Appl.,2017,2017:16]and[Ayari,M.I.et al.Fixed Point Theory Appl.,2019,2019:7].We give an example to show the validity of our main result.Moreover,we obtain several consequences concerning about best proximity point and common fixed point results for two mappings,and we present an application of a corollary to discuss the solutions to a class of systems of Volterra type integral equations.     

A Triphenylphosphonium Functionalized AIE Conjugated Macrocyclic Tetramal&mide for Mitochondrial-targeting Bioimaging

Developme nt of subcellular orga nelle-targeted bioimagi ng probes is of great imports nee in the field of early detection of diseases and exploring the behaviors of subcellular organelles.Herein,we present a triphenyIphosphonium functionalized conjugated macrocyclic tetramaleimide(TPP-CMT)as a mitochondrial-targeting bioimaging probe.The core of TPP-CMT is obtained by connecting two pyrenes and two benzenes through four maleimides.This unique structure endows TPP-CMT with exceptional far red/near-i nfirared aggregati on-induced emissi on(FR/NIR-AIE)characteristics.TPP-CMT is an excelle nt fluoresce nt emitter in most solve nts and eve n in solid states.The qua ntum yield of TPP-CMT was higher tha n 27% when dissolved in comm on middle-polarity orga nic solve nt and this value remained at 28.2% in its solid state.The in troducti on of four triphe ny Iphosph onium on maleimide positions endows TPP-CMT with mitochondrial-targeting ability.Thanks to the FR/NIR-AIE characteristics and the mitochondri-al-targeti ng ability,this well-desig ned fluoresce nt probe was successfully employed for mitochondrial targeti ng bioimaging of HeLa and HepG2 cells.     

嵌锁式CFRP方形蜂窝夹芯梁低速冲击响应及失效机理

采用嵌锁组装工艺制备了碳纤维/树脂基复合材料方形蜂窝夹芯梁，实验研究了低速冲击载荷下简支和固支夹芯梁的动态响应及失效机理，获得了不同冲击速度下夹芯梁的失效模式，分析了其损伤演化过程和失效机理，探讨了冲击速度、边界条件、面板质量分布以及槽口方向等因素对夹芯梁破坏模式及承载能力的影响。研究结果表明，芯材长肋板槽口方向对夹芯梁的失效模式有较大影响，槽口向上的芯材跨中部分产生了挤压变形，而槽口向下的芯材跨中部分槽口在拉伸作用下出现了沿槽口开裂失效，继而引起面板脱粘和肋板断裂；同等质量下，较厚的上面板设计可以提高夹芯梁的抗冲击能力，冲击速度越大，夹芯梁的峰值载荷和承载能力越高；固支边界使得夹芯梁的后失效行为呈现出明显的强化效应，在夹芯梁跨中部分发生初始失效后出现了后继的固支端芯材和面板断裂失效模式。