An ab initio-based global potential energy surface for the SH3 system and full-dimensional state-to-state quantum dynamics study for the H2 + HS → H2S + H reaction

An accurate potential energy surface for the ground electronic state of SH₃ system has been constructed with 41,882 high level ab initio energy points and the neural network fitting method. The time-dependent wave packet method has been used to calculate the first state-to-state differential cross sections for the title reaction up to 1.2 eV in full dimensions, based on the reactant–product decoupling scheme. It is found that the majority of H₂S are produced in the ground vibrational state, with a large fraction of available energy for the reaction ending up as product translational motion. The differential cross sections at the threshold energy are dominated by a very narrow peak in the backward direction. With the increase of collision energy, the width of the angular distribution increases considerably, which is a typical feature of a direct reaction via abstract mechanism, similar to the H₂ + OH → H₂O + H reaction. © 2018 Wiley Periodicals, Inc.     

Electrochemical dehydrogenative N–H/N–H coupling reactions

The N–N bond is present in many important organic compounds, such as hydrazines, pyrazoles, azos, etc. Many methods based on transition metal catalyzed N–N coupling or functionalization of hydrazine have been reported for the synthesis of N–N containing organic compounds. In recent years, electrochemical dehydrogenative N–H/N–H coupling has become a powerful tool for the construction of N–N bearing organic compounds. The electrochemical methods employ electrons as traceless redox reagents instead of chemicals and produce hydrogen as the only byproduct. In this review, we summarize the recent advances in the electrochemical dehydrogenative N–H/N–H coupling reactions with focus on the mechanistic insights and synthetic applications of these transformations.     

Tailorable PC71BM Isomers: Using the Most Prevalent Electron Acceptor to Obtain High‐Performance Polymer Solar Cells

Despite being widely used as electron acceptor in polymer solar cells, commercially available PC₇₁BM (phenyl‐C₇₁‐butyric acid methyl ester) usually has a “random” composition of mixed regioisomers or stereoisomers. Here PC₇₁BM has been isolated into three typical isomers, α‐, β₁‐ and β₂‐PC₇₁BM, to establish the isomer‐dependent photovoltaic performance on changing the ternary composition of α‐, β₁‐ and β₂‐PC₇₁BM. Mixing the isomers in a ratio of α/β₁/β₂=8:1:1 resulted in the best power conversion efficiency (PCE) of 7.67 % for the polymer solar cells with PTB7:PC₇₁BM as photoactive layer (PTB7=poly[[4,8‐bis[(2‐ethylhexyl)oxy]benzo[1,2‐b:4,5‐b′]dithiophene‐2,6‐diyl][3‐fluoro‐2‐[(2‐ethylhexyl)carbonyl]thieno[3,4‐b]thiophenediyl]]). The three typical PC₇₁BM isomers, even though sharing similar LUMO energy levels and light absorption, render starkly different photovoltaic performances with average‐performing PCE of 1.28–7.44 % due to diverse self‐aggregation of individual or mixed PC₇₁BM isomers in the otherwise same polymer solar cells.     

Oxidation of aromatic sulfides with molecular oxygen: Controllable synthesis of sulfoxides or sulfones

The recent development of selective oxidation of aromatic sulfides with molecular oxygen was highlighted. The sulfoxides and sulfones could be obtained by simply switching the reaction media, i.e., bis(2-butoxyethyl)ether (BBE) or poly(ethylene glycol)dimethyl ether (PEGDME). The application of the high-boiling-point polyether as an initiator and green media can eliminate the need of large quantities of additives and volatile solvents. This strategy represents an economic and eco-friendly method that could find potential applications.     

原位拉曼光谱与X射线吸收光谱研究能源转换电催化反应

近年来,水分解、氧气/二氧化碳还原等电化学能源转换技术为解决全球能源短缺及环境问题提供了新的思路和方向.然而,对这些能源转换技术的反应机理及其催化剂的活性位点目前仍缺乏深刻的认识和理解,这限制了高效、稳定催化剂的开发,以致阻碍该类电化学技术的进一步发展.原位光谱技术的快速发展为解决上述问题提供了坚实的基础,其中拉曼光谱是检测含氧物种的有效技术,X射线吸收谱则是揭示催化剂配位环境和价态变化的有力工具.鉴于此,本文详细介绍了原位拉曼光谱和X射线吸收光谱在电化学领域的最新应用.重点分析了一些代表性的例子,主要包括:(1)揭示了不同Pt单晶以及Pt基催化剂表面的具体氧还原路径;(2)明确了过渡金属-氮-碳催化剂的真实氧还原位点;(3)解析了碱性条件下OH?离子对于氢氧化反应的作用;(4)揭示了氢析出反应中非Pt催化剂的活性位点;(5)检测到了氧析出和二氧化碳还原过程中催化剂的相变过程.上述例子表明原位表征技术的确可以有效监测电化学催化过程,捕捉中间产物,揭示反应机理以及表征催化剂的相变过程,可为合理的设计和制备高效催化剂提供可靠依据.然而,目前的原位表征技术还存在较多问题,比如拉曼光谱往往需要借助增强基底来增强其信号,从而限制其在表征实际催化剂中应用.而基于同步辐射光源的X射线吸收光谱其能量较高,可能会引发催化剂发生相变甚至损坏催化剂,而且它是一种体相敏感的表征技术,很难精确反映催化剂表面过程.除了这些原位技术的本身局限性之外,仍有许多问题阻碍对电催化过程的深入认识.例如,应将原位研究转化为工况研究,尤其要考虑电解质的作用.另外,缺乏有效的时间分辨技术来揭示不同电位下活性物种的动态变化.因此,需要不断发展新技术以及新策略,使得表征技术可以更精确真实地揭示电催化的原位过程,更有效地指导催化剂的设计开发.     

随机薛定谔级联方程：理论和应用

随机薛定谔级联方程是一种基于波函数的严格量子动力学方法，它可用于研究耦合到玻色子热库的复杂体系中的量子动力学过程. 本综述从开放量子体系费曼路径积分的影响泛函出发，概述了随机薛定谔级联方程的一般理论框架和各种具体表述形式，并通过对复杂体系中超快激发能量转移过程的模拟来展示方法的应用范例和计算效率.     

Synthesis of Giant π-Extended Molecular Macrocyclic Rings as Finite Models of Carbon Nanotubes Displaying Enriched Size-Dependent Physical Properties

Bottom-up synthesis of π-extended macrocyclic carbon rings is promising for constructing length- and diameter-specific carbon nanotubes (CNTs). However, it is still a great challenge to realize size-controllable giant carbon macrocycles. Herein, a tunable synthesis of curved nanographene-based giant π-extended macrocyclic rings (CHBC[n]s; n=8, 6, 4), as finite models of armchair CNTs, is reported. Among them, CHBC[8] contains 336 all-carbon atoms and is the largest cyclic conjugated molecular CNT segment ever reported. CHBC[n]s were systematically characterized by various spectroscopic methods and applied in photoelectrochemical cells for the first time. This revealed that the proton chemical shifts, fluorescence, and electronic and photoelectrical properties of CHBC[n]s are highly dependent on the macrocycle diameter. The tunable bottom-up synthesis of giant macrocyclic rings could pave the way towards large π-extended diameter- and chirality-specific CNT segments.     

Are Hetero-metallapentalenes Aromatic or Not? A DFT Investigation

Aromaticity is one of the most basic concepts in organic chemistry. The planar Möbius aromatic metallapentalynes and metallapentalenes have attracted considerable attention in the past few years. However, the aromaticity of metallapentalenes containing heteroatoms (such as B, N, and O), termed as hetero-metallapentalenes, is rarely studied. Herein, the stability and aromaticity of a series of hetero-metallapentalenes are theoretically investigated. The results reveal lower aromaticity in metallaborapentalene, comparable aromaticity in metallazapentalene, and nonaromaticity in metalloxapentalene relative to that of metallapentalene. Moreover, the effect of Lewis bases on the aromaticity and stability of metallaborapentalene is discussed. These results provide useful information for experimental chemists to realize more hetero-metallapentalenes.     

Metal-Organic Frameworks for Photocatalytic Water Splitting and CO2 Reduction

Photocatalytic water splitting and carbon dioxide (CO₂) reduction provide promising solutions to global energy and environmental issues. In recent years, metal-organic frameworks (MOFs), a class of crystalline porous solids featuring well-defined and tailorable structures as well as high surface areas, have captured great interest toward photocatalytic water splitting and CO₂ reduction. In this review, the semiconductor-like behavior of MOFs is first discussed. We then summarize the recent advances in photocatalytic water splitting and CO₂ reduction over MOF-based materials and focus on the unique advantage of MOFs for clarifying the structure-property relationship in photocatalysis. In addition, some representative characterization techniques have been presented to unveil the photocatalytic kinetics and reaction intermediates in MOF-based systems. Finally, the challenges, and perspectives for future directions are proposed.