Supramolecular optical sensor arrays for on-site analytical devices

Supramolecular optical chemosensors are useful tools in analytical chemistry for the visualization of molecular recognition information. One advantage is that they can be utilized for array systems to detect multiple analytes. However, chemosensor arrays have been evaluated mainly in the solution phase, which limits a wide range of practical applications. Thus, appropriate solid support materials such as polymer gels and papers are required to broaden the scope of the application of chemosensors as on-site analytical tools. In this review, we summarize the actual approaches for the fabrication of solid-state chemosensor arrays combined with powerful data processing techniques and portable digital recorders for real-world applications.     

Inhibition efficiency and adsorption mechanism of 4-aminobenzoic acid for copper corrosion in nitric acid medium: a combined experimental and theoretical investigation

Structural Chemistry - A combined experimental and theoretical study is presented to predict and analyze the inhibition efficiency and adsorption mechanism of 4-aminobenzoic acid molecule for...     

Behavior of CO2/water flow in porous media for CO2 geological storage

A clear understanding of two-phase fluid flow properties in porous media is of importance to CO₂ geological storage. The study visually measured the immiscible and miscible displacement of water by CO₂ using MRI (magnetic resonance imaging), and investigated the factor influencing the displacement process in porous media which were filled with quartz glass beads. For immiscible displacement at slow flow rates, the MR signal intensity of images increased because of CO₂ dissolution; before the dissolution phenomenon became inconspicuous at flow rate of 0.8 mL min^− 1. For miscible displacement, the MR signal intensity decreased gradually independent of flow rates, because supercritical CO₂ and water became miscible in the beginning of CO₂ injection. CO₂ channeling or fingering phenomena were more obviously observed with lower permeable porous media. Capillary force decreases with increasing particle size, which would increase permeability and allow CO₂ and water to invade into small pore spaces more easily. The study also showed CO₂ flow patterns were dominated by dimensionless capillary number, changing from capillary finger to stable flow. The relative permeability curve was calculated using Brooks-Corey model, while the results showed the relative permeability of CO₂ slightly decreases with the increase of capillary number.     

A survey of surface tension,molar volume and density for Sn–Ag–Cu–Bi–Sb quinary alloys as lead-free solders

ABSTRACT

By applying the geometric models and the theoretical equation, the surface tension, the molar volume and the density were studied. The empirical calculations were carried out in temperature range 623?K?≤?T?≤?1123?K. Only few thermophysical properties were estimated for eight quinary alloys: Sn3.55Ag0.5Cu3Bi3Sb, Sn3.48Ag0.5Cu3Bi5Sb, Sn3.48 Ag0.5Cu5Bi3Sb, Sn3.40 Ag0.5Cu5Bi5Sb, Sn3.53Ag1Cu3Bi3Sb, Sn3.46Ag1Cu3Bi5Sb, Sn3.46Ag1Cu5Bi3Sb, Sn3.38Ag1Cu5Bi5Sb. The results show that surface tension and density have a linear appearance for all temperatures. We have also studied the influence of the composition and temperature in the studied alloys. The obtained theoretical results are compared with the experimental ones and with the conventional Pb–Sn welds.     

Gamma ray induced changes on vibrational spectroscopic properties of strontium alumino-borosilicate glasses

The present investigation reports the effect of influence of aluminum ions on radiation damage of strontium borosilicate glasses studied by means of spectroscopic (viz., optical absorption (OA), infrared and Raman spectra). The composition of the glasses chosen for the study is 40SrO–xAl₂O₃–(15-x) B₂O₃–40SiO₂ (x = 5, 7.5, 10), all in mol%. The glasses were synthesized by conventional melt quenching method. Later, the samples were exposed to gamma (γ) radiation dose of strengths 10 kGy and 30 kGy with a dose rate of 1.5 Gy/s using ⁶⁰Co as radiation source. The infrared spectra (IR), Raman spectra and optical absorption (OA) spectra of the samples were recorded at ambient temperature before and after irradiation. The OA spectra of the pre-irradiated samples do not exhibit any absorption bands in the UV–vis regions and IR and Raman spectra exhibited conventional vibrational bands due to different borate, silicate AlO₄ and AlO₆ structural units. The OA spectra of post irradiated samples exhibited a broad absorption band in the wavelength region 600–750 nm; it is attributed to electron trapped color centers. The intensity of this peak is observed to increase with increase of the γ-ray dose. Considerable changes in the intensities of various bands in the IR and Raman spectra were also observed. The changes were explained based on structural modifications taking place in the glass network due to γ-ray irradiation and finally it is concluded that the glasses mixed with 10.0 mol% of Al₂O₃ are relatively more radiation resistant.     

双分子水和氨气催化CF3OH分子裂解的理论研究

利用G3和CBS-QB3的理论方法研究CF₃OH分子裂解成FCFO和HF,并考虑大气中双分子和氨气对CF₃OH分子裂解的催化作用. 理论计算表明：由于在G3的理论水平下,计算的能垒为188.52 kJ/mol,所以CF₃OH分子在大气条件下不可能发生单分子裂解;当氨气和双分子水被加入时,能垒都被降到25.08 kJ/mol,起了强的催化作用. 除此之外,应用过渡态理论对速率常数进行了计算,计算结果表明：氨气催化CF₃OH分子的速率常数是单分子和双分子催化CF₃OH分子裂解速率常数的10⁹和10⁵倍. 考虑到大气中这些物质的浓度,计算结果预测了氨气催化CF₃OH分子裂解在大气中起到重要的作用.     

气相中HRnCCH和X(X=H_2O,NH_3)反应机理的理论研究

在CCSD(T)//MP2/aug-cc-pVTZ-pp理论水平上,研究了HRnCCH与大气中H2O及NH3分子反应的机理,反应主要包括HRnCCH与HRnOH及HRnNH2之间的转化、H2O和NH3在HRnCCH中的碳碳三键上的加成反应以及HRnCCH与双分子水反应等.结果表明,HRnCCH与H2O反应生成HCCH和HRnOH及HRnCCH与NH3反应生成HCCH和HRnNH2的能垒分别为54.1和75.2 kJ/mol,而生成HRnCHC(OH)H,HRnC(OH)CH2,HRnCHC(NH2)H和HRnC(NH2)CH2的活化能分别为219.6,220.5,174.4和182.4kJ/mol,此结果表明HRnCCH反应性较弱且是稳态存在的.此外,在HRnCCH与H2O反应中加入单个水分子,仍然生成HRnCHC(OH)H,但反应活化能却降低了96.4 kJ/mol,说明水分子对该反应有明显的催化作用.     

Field emission scanning electron microscopy (FE-SEM) as an approach for nanoparticle detection inside cells

When developing new nanoparticles for bio-applications, it is important to fully characterize the nanoparticle's behavior in biological systems. The most common techniques employed for mapping nanoparticles inside cells include transmission electron microscopy (TEM) and scanning transmission electron microscopy (STEM). These techniques entail passing an electron beam through a thin specimen. STEM or TEM imaging is often used for the detection of nanoparticles inside cellular organelles. However, lengthy sample preparation is required (i.e., fixation, dehydration, drying, resin embedding, and cutting). In the present work, a new matrix (FTO glass) for biological samples was used and characterized by field emission scanning electron microscopy (FE-SEM) to generate images comparable to those obtained by TEM. Using FE-SEM, nanoparticle images were acquired inside endo/lysosomes without disruption of the cellular shape. Furthermore, the initial steps of nanoparticle incorporation into the cells were captured. In addition, the conductive FTO glass endowed the sample with high stability under the required accelerating voltage. Owing to these features of the sample, further analyses could be performed (material contrast and energy-dispersive X-ray spectroscopy (EDS)), which confirmed the presence of nanoparticles inside the cells. The results showed that FE-SEM can enable detailed characterization of nanoparticles in endosomes without the need for contrast staining or metal coating of the sample. Images showing the intracellular distribution of nanoparticles together with cellular morphology can give important information on the biocompatibility and demonstrate the potential of nanoparticle utilization in medicine.     

氧分子和苯酚自由基反应机理的理论研究

用密度泛函理论B3LYP方法对氧分子和苯酚自由基反应机理进行了研究.在B3LYP/6-31G(d,p)水平上优化得到了反应路径上的反应物、中间体、过渡态和产物的几何构型和谐振频率;并在B3LYP/6-311 G(2df,2pd)水平上进行了单点能计算.计算结果表明,苯酚是O2同苯酚自由基Ⅰ反应的主要产物,苯酚过氧自由基Ⅴ和Ⅵ是此反应的次要产物.苯酚过氧自由基Ⅴ的主要后继反应中,环化形成[3.2.1]双环氧桥自由基Ⅶ是主要的反应路径,Ⅶ可以进一步开环反应,形成环裂解产物1,2和1,4二醛.     

CuC、CuN分子基态的结构与分析势能函数

在Cu 的有效核势近似下, 运用密度泛函(B3LYP)方法, 对Cu采用基集合LANL2DZ, 但对其价电子基组的p轨道函数部分做了必要的修改, 而对C、N采用基集合6-311+G(d), 对CuC和CuN分子的微观结构进行了理论计算. 优化并计算了两分子基态的能量, 平衡结构和谐振频率. 根据原子分子反应静力学原理, 导出了CuC和CuN分子基态的合理离解极限和离解能. 应用密度泛函(B3LYP)方法扫描了CuC和CuN分子基态的势能曲线, 并采用最小二乘法拟合了两分子基态的Murrell-Sorbie势能函数及其在平衡位置附近的Dunham展开式. 同时根据Herzberg 和Dunham的公式, 计算了CuC和CuN分子基态的光谱参数.