A detailed study of the geometry, aromatic character, electronic and magnetic properties for a series of positively charged N-doped polycyclic aromatic hydrocarbons (PAHs) was performed. Magnetic properties of the examined molecules were analyzed by means of the magnetically induced current density calculated using the diamagnetic-zero version of the continuous transformation of origin of current density (CTOCD-DZ) method. The comparative study of the local aromaticity of the studied molecules was performed using several different indices: energy effect (ef), harmonic oscillator model of aromaticity (HOMA) index, six centre delocalization index (SCI) and nucleus independent chemical shifts (NICS). The presence of N-atoms in the inner rings was found to cause a planarity distortion in the studied N-doped systems. The geometric changes and charged nature of the studied N-doped systems do not significantly influence the current density and the local aromaticity distribution in comparison with the corresponding parent benzenoid hydrocarbons. The present study demonstrates how quantum chemical calculations can be used for rational design of novel PAHs and for fine tuning of their properties. 相似文献
Efficient,robust and cost-effective electrocatalysts that catalyze hydrogen evolution/oxidation reaction(HER/HOR)in alkaline media are highly demanded.Recently,single-atom catalysts(SACs)have emerged as new promising candidates;however,the rational design of supports and the optimization of coordination environment between supports and metal atoms are challenging.In this work,we successfully fabricate atomically dispersed ruthenium(Ru)species,which are strongly coordinated by N and S dual heteroatoms on holey graphene(RuSA/NSG),as an excellent bifunctional catalyst for HER/HOR.In alkaline media,the developed catalyst exhibits high catalytic performance with a low overpotential of 57.3 mV to drive a current density of 10 mA cm-1 for HER,and its mass activity is about 5.8 times higher than that of commercial Pt/C and Ru/C catalysts at an overpotential of 100 mV.Similarly,considerable HOR performance of Ru SA/NSG is verified to be superior to Pt/C and Ru/C.Furthermore,X-ray-based spectroscopy measurements and density-functional theory calculations have confirmed that,compared with Ru–N4,the tailored Ru–N4–S2 with nearby S dopants can act as more active centers to greatly accelerate the sluggish HER/HOR kinetics in alkaline media.The present work provides a new atomic-level engineering strategy to modulate catalytic activities of SACs via the coordination design using dual heteroatoms on the carbon support. 相似文献
Based on high specific surface area, high porosity of metal-organic frameworks (MOFs) and excellent visible light response of CdS, the CdS/Cd-MOF nanocomposites were constructed by in-situ sulfurization to form CdS using Cd-MOF as precursor and the CdS loading was controlled by the dose of thioacetamide. Under the irradiation of simulated sunlight, the degradation rate of methylene blue (MB) by 10 mg MOF/CdS-6 (mass ratio of MOF to thioacetamide is 6:1) was 91.9% in 100 min, which was higher than that of pure Cd-MOF (62.3%) and pure CdS (67.5%). This is attributed to the larger specific surface area of the composite catalysts, which provides more active sites. Meanwhile, the loading of CdS obviously broadens the light response range of Cd-MOF and improves the utilization of visible light. The Mott-Schottky model experiment shows that the formed type-II heterojunction between Cd-MOF and CdS can effectively inhibit the recombination of photogenerated electrons and holes. Meanwhile, the photocurrent intensity of MOF/CdS-6 is 8 times and 2.5 times of that of pure Cd-MOF and CdS. In addition, MOF/CdS-6 showed good photocatalytic performance after five cycles, showing excellent stability and reusability. 相似文献
In this work, a green technique for preparing TbFeO3/CuO was reported by employing Crataegus and Lantana Camara leaves as fuel and alkalizing agents, respectively. The new sensor based on the perovskite-type nanocomposite was employed as a sensitive and selective platform to detect Pb(II), Zn(II) and Cd(II) simultaneously. TbFeO3/CuO/Carbon paste electrode (CPE) exhibited a large specific surface area and great electrical conductivity, which enhanced electron transport in the electrochemical process considerably. Moreover, square wave anodic stripping voltammetry (SWASV) was used for the investigation of some factors influencing the sensor sensitivity like pH, modifier concentration, as well as accumulation time and potential. Therefore, the low detection limit (LOD) and a wide linear range were obtained at optimum conditions. In this study, a linear range between 0.9 and 110 µg/L for three ions and LOD of 0.48, 0.29 and 0.12 for zinc, cadmium and lead were achieved, respectively. Moreover, TbFeO3/CuO/CPE was employed to detect zinc, cadmium and lead ions simultaneously in the real samples so that the results have shown consistency with a standard inductively coupled plasma (ICP). 相似文献
The requirement of green and sustainable materials to prepare heterogeneous catalysts has intensified for practical reasons over the past few decades. Carbohydrates are possibly the most plentiful and renewable organic materials in nature with inimitable physiochemical properties, plausible low-cost and large-scale production, and sustainability features could be exploited in the generation of nanostructured heterogeneous catalysts. This review article outlines the organic transformations catalyzed by diverse carbohydrate-based nanostructured catalysts in greener and environmentally friendly processes. Selected examples are highlighted for a variety of organic reactions exploiting the proposed catalysts’ reactivity and reusability, and interactions with the intrinsic nature of the applied carbohydrate supports; advantages and speculated challenges of the introduced catalysts are deliberated as well. 相似文献
Chemiluminescence (CL) is a luminescence phenomenon originated by a “chemical reaction.” CL provides a basis for real-time imaging technology in materials science. In fact, a CL reaction is easily triggered in general and makes it possible to track its progress in a target material by highly sensitive photon detection. Recently, real-time CL imagings became breakthrough techniques for analyzing the molecular mechanisms of failures of polymeric materials and of reactions and phase transitions in soft crystals. In the CL imaging techniques, adamantylideneadamantane 1,2-dioxetane (Adox) has been adopted as a stable core structure of chemiluminophores. That is, Adox is an essential seed compound to design a chemiluminophore with a desired molecular function. To support developments of real-time CL imaging techniques, we review the chemistry of Adox as a representative stable chemiluminophore including scientific history and utilities of Adox and its derivatives. 相似文献
Side-chain engineering has been demonstrated as an effective method for fine-tuning the optical, electrical, and morphological properties of organic semiconductors toward efficient organic solar cells (OSCs). In this work, three isomeric non-fullerene small molecule acceptors (SMAs), named BTP-4F-T2C8, BTP-4F-T2EH and BTP-4F-T3EH, with linear and branched alkyl chains substituted on the α or β positions of thiophene as the side chains, were synthesized and systematically investigated. The results demonstrate that the size and substitution position of alkyl side chains can greatly affect the electronic properties, molecular packing as well as crystallinity of the SMAs. After blending with donor polymer D18-Cl, the prominent device performance of 18.25% was achieved by the BTP-4F-T3EH-based solar cells, which is higher than those of the BTP-4F-T2EH-based (17.41%) and BTP-4F-T2C8-based (15.92%) ones. The enhanced performance of the BTP-4F-T3EH-based devices is attributed to its stronger crystallinity, higher electron mobility, suppressed biomolecular recombination, and the appropriate intermolecular interaction with the donor polymer. This work reveals that the side chain isomerization strategy can be a practical way in tuning the molecular packing and blend morphology for improving the performance of organic solar cells.
Cobalt oxide (Co3O4) modified anatase titanium dioxide nanotubes (ATNTs) have been investigated for the electrochemical sensing of hydrogen peroxide (H2O2). ATNTs have been synthesized by a two-step anodization process. ATNTs were then modified with Co3O4 employing chemical bath deposition method. The structure and morphology of ATNTs and their modification with Co3O4 has been confirmed by X-ray diffraction by scanning electron microscopy. H2O2 sensing has been studied in 0.1 M PBS solution, by cyclic voltammetry and amperometry. Variation in the peak positions and current densities was observed with addition of H2O2 for Co3O4 modified ATNTs. Sensitivity and limit of detection improved with modification of ATNTs with Co3O4 with precursor concentration up to 0.8 M. However, at higher precursor concentrations sensitivity and limit of detection toward H2O2 deteriorated. Co3O4 Modified ATNTS using 0.8 M precursor concentration are comparatively more suitable for H2O2 sensing applications due to the optimum formation of Co3O4/ATNTs heterojunctions. 相似文献
Vertically stacked heterostructures have received extensive attention because of their tunable electronic structures and outstanding optical properties. In this work, we study the structural, electronic, and optical properties of vertically stacked GaS-SnS2 heterostructure under the frame of density functional theory. We find that the stacked GaS-SnS2 heterostructure is a semiconductor with a suitable indirect band gap of 1.82 eV, exhibiting a type-II band alignment for easily separating the photo-generated carriers. The electronic properties of GaS-SnS2 heterostructure can be effectively tuned by an external strain and electric field. The optical absorption of GaS-SnS2 heterostructure is more enhanced than those of the GaS monolayer and SnS2 monolayer in the visible light region. Our results suggest that the GaS-SnS2 heterostructure is a promising candidate for the photocatalyst and photoelectronic devices in the visible light region. 相似文献