Hydrogen Spillover Enhanced Hydroxyl Formation and Catalytic Activity Toward CO Oxidation at the Metal/Oxide Interface

H₂‐promoted catalytic activity of oxide‐supported metal catalysts in low‐temperature CO oxidation is of great interest but its origin remains unknown. Employing an FeO(111)/Pt(111) inverse model catalyst, we herewith report direct experimental evidence for the spillover of H(a) adatoms on the Pt surface formed by H₂ dissociation to the Pt?FeO interface to form hydroxyl groups that facilely oxidize CO(a) on the neighboring Pt surface to produce CO₂. Hydroxyl groups and coadsorbed water play a crucial role in the occurrence of hydrogen spillover. These results unambiguously identify the occurrence of hydrogen spillover from the metal surface to the noble metal/metal oxide interface and the resultant enhanced catalytic activity of the metal/oxide interface in low‐temperature CO oxidation, which provides a molecular‐level understanding of both H₂‐promoted catalytic activity of metal/oxide ensembles in low‐temperature CO oxidation and hydrogen spillover.     

FeOx Coating on Pd/C Catalyst by Atomic Layer Deposition Enhances the Catalytic Activity in Dehydrogenation of Formic Acid

Hydrogen generation from formic acid (FA) has received significant attention.The challenge is to obtain a highly active catalyst under mild conditions for practical applications.Here atomic layer deposition (ALD) of FeO_x was performed to deposit an ultrathin oxide coating layer to a Pd/C catalyst,therein the FeO_x coverage was precisely controlled by ALD cycles.Transmission electron microscopy and powder X-ray diffraction measurements suggest that the FeO_x coating layer improved the thermal stability of Pd nanoparticles (NPs).X-ray photoelectron spectroscopy measurement showed that deposition of FeO_x on the Pd NPs caused a positive shift of Pd3d binding energy.In the FA dehydrogenation reaction,the ultrathin FeO_x layer on the Pd/C could considerably improve the catalytic activity,and Pd/C coated with 8 cycles of FeO_x showed an optimized activity with turnover frequency being about 2 times higher than the uncoated one.The improved activities were in a volcanoshape as a function of the number of FeO_x ALD cycles,indicating the coverage of FeO_x is critical for the optimized activity.In summary,simultaneous improvements of activity and thermal stability of Pd/C catalyst by ultra-thin FeO_x overlayer suggest to be an effective way to design active catalysts for the FA dehydrogenation reaction.     

Enhancing electrochemical conversion of lithium polysulfide by 1T-rich MoSe2 nanosheets for high performance lithium–sulfur batteries

The sluggish conversion kinetics and shuttle effect of lithium polysulfides (LiPSs) severely hamper the commercialization of lithium–sulfur batteries. Numerous electrocatalysts have been used to address these issues, amongst which, transition metal dichalcogenides have shown excellent catalytic performance in the study of lithium–sulfur batteries. Note that dichalcogenides in different phases have different catalytic properties, and such catalytic materials in different phases have a prominent impact on the performance of lithium–sulfur batteries. Herein, 1T-phase rich MoSe₂ (T-MoSe₂) nanosheets are synthesized and used to catalyze the conversion of LiPSs. Compared with the 2H-phase rich MoSe₂ (H-MoSe₂) nanosheets, the T-MoSe₂ nanosheets significantly accelerate the liquid phase transformation of LiPSs and the nucleation process of Li₂S. In-situ Raman and X-ray photoelectron spectroscopy (XPS) find that T-MoSe₂ effectively captures LiPSs through the formation of Mo-S and Li-Se bonds, and simultaneously achieves fast catalytic conversion of LiPSs. The lithium–sulfur batteries with T-MoSe₂ functionalized separators display a fantastic rate performance of 770.1 mAh/g at 3 C and wonderful cycling stability, with a capacity decay rate as low as 0.065% during 400 cycles at 1 C. This work offers a novel perspective for the rational design of selenide electrocatalysts in lithium–sulfur chemistry.     

Designing Solid Electrolyte Interfaces towards Homogeneous Na Deposition: Theoretical Guidelines for Electrolyte Additives and Superior High-Rate Cycling Stability

Metallic Na is a promising metal anode for large-scale energy storage. Nevertheless, unstable solid electrolyte interphase (SEI) and uncontrollable Na dendrite growth lead to disastrous short circuit and poor cycle life. Through phase field and ab initio molecular dynamics simulation, we first predict that the sodium bromide (NaBr) with the lowest Na ion diffusion energy barrier among sodium halogen compounds (NaX, X=F, Cl, Br, I) is the ideal SEI composition to induce the spherical Na deposition for suppressing dendrite growth. Then, 1,2-dibromobenzene (1,2-DBB) additive is introduced into the common fluoroethylene carbonate-based carbonate electrolyte (the corresponding SEI has high mechanical stability) to construct a desirable NaBr-rich stable SEI layer. When the Na||Na₃V₂(PO₄)₃ cell utilizes the electrolyte with 1,2-DBB additive, an extraordinary capacity retention of 94 % is achieved after 2000 cycles at a high rate of 10 C. This study provides a design philosophy for dendrite-free Na metal anode and can be expanded to other metal anodes.     

Correlation between Interfacial Structures and Device Performance: The Double-Edged Sword Effect of Lead Iodide in Perovskite Solar Cells

The interfacial electronic structure of perovskite layers and transport layers is critical for the performance and stability of perovskite solar cells (PSCs). The device performance of PSCs can generally be improved by adding a slight excess of lead iodide (PbI₂) to the precursor solution. However, its underlying working mechanism is controversial. Here, we performed a comprehensive study of the electronic structures at the interface between CH₃NH₃PbI₃ and C₆₀ with and without the modification of PbI₂ using in situ photoemission spectroscopy measurements. The correlation between the interfacial structures and the device performance was explored based on performance and stability tests. We found that there is an interfacial dipole reversal, and the downward band bending is larger at the CH₃NH₃PbI₃/C₆₀ interface with the modification of PbI₂ as compared to that without PbI₂. Therefore, PSCs with PbI₂ modification exhibit faster charge carrier transport and slower carrier recombination. Nevertheless, the modification of PbI₂ undermines the device stability due to aggravated iodide migration. Our findings provide a fundamental understanding of the CH₃NH₃PbI₃/C₆₀ interfacial structure from the perspective of the atomic layer and insight into the double-edged sword effect of PbI₂ as an additive.     

Interaction of Hydrogen with Ceria: Hydroxylation,Reduction, and Hydride Formation on the Surface and in the Bulk

The study reports the first attempt to address the interplay between surface and bulk in hydride formation in ceria (CeO₂) by combining experiment, using surface sensitive and bulk sensitive spectroscopic techniques on the two sample systems, i.e., CeO₂(111) thin films and CeO₂ powders, and theoretical calculations of CeO₂(111) surfaces with oxygen vacancies (O_v) at the surface and in the bulk. We show that, on a stoichiometric CeO₂(111) surface, H₂ dissociates and forms surface hydroxyls (OH). On the pre-reduced CeO_2−x samples, both films and powders, hydroxyls and hydrides (Ce−H) are formed on the surface as well as in the bulk, accompanied by the Ce³⁺ ↔ Ce⁴⁺ redox reaction. As the O_v concentration increases, hydroxyl is destabilized and hydride becomes more stable. Surface hydroxyl is more stable than bulk hydroxyl, whereas bulk hydride is more stable than surface hydride. The surface hydride formation is the kinetically favorable process at relatively low temperatures, and the resulting surface hydride may diffuse into the bulk region and be stabilized therein. At higher temperatures, surface hydroxyls can react to produce water and create additional oxygen vacancies, increasing its concentration, which controls the H₂/CeO₂ interaction. The results demonstrate a large diversity of reaction pathways, which have to be taken into account for better understanding of reactivity of ceria-based catalysts in a hydrogen-rich atmosphere.     

原子层沉积：一种多相催化剂“自下而上”气相制备新策略

Heterogeneous catalysts are usually synthesized by the conventional wet-chemistry methods, including wet-impregnation, ion exchange, and deposition-precipitation. With the development of catalyst synthesis, great progress has been made in many industrially important catalytic processes. However, these catalytic materials often have very complex structures along with poor uniformity of active sites. Such heterogeneity of active site structures significantly decreases catalytic performance, especially in terms of selectivity, and hinders atomic-level understanding of structure-activity relationships. Moreover, loss of exposed active components by sintering or leaching under harsh reaction conditions causes considerable catalyst deactivation. It is desirable to develop a facile method to tune catalyst active site structures, as well as their local chemical environments on the atomic level, thereby facilitating reaction mechanisms understanding and rational design of catalysts with high stability.     

原子层沉积技术沉积的FeOx包裹层显著提高Pd/C催化剂在甲酸分解放氢反应中的催化活性

Hydrogen generation from formic acid (FA) has received significant attention.The challenge is to obtain a highly active catalyst under mild conditions for practical applications.Here atomic layer deposition (ALD) of FeO_x was performed to deposit an ultrathin oxide coating layer to a Pd/C catalyst,therein the FeO_x coverage was precisely controlled by ALD cycles.Transmission electron microscopy and powder X-ray diffraction measurements suggest that the FeO_x coating layer improved the thermal stability of Pd nanoparticles (NPs).X-ray photoelectron spectroscopy measurement showed that deposition of FeO_x on the Pd NPs caused a positive shift of Pd3d binding energy.In the FA dehydrogenation reaction,the ultrathin FeO_x layer on the Pd/C could considerably improve the catalytic activity,and Pd/C coated with 8 cycles of FeO_x showed an optimized activity with turnover frequency being about 2 times higher than the uncoated one.The improved activities were in a volcanoshape as a function of the number of FeO_x ALD cycles,indicating the coverage of FeO_x is critical for the optimized activity.In summary,simultaneous improvements of activity and thermal stability of Pd/C catalyst by ultra-thin FeO_x overlayer suggest to be an effective way to design active catalysts for the FA dehydrogenation reaction.     

Surface chemistry connecting heterogeneous catalysis,photocatalysis and plasmonic catalysis

正Chemical reactions catalyzed by solid catalysts have recently expanded rapidly from traditional heterogeneous catalytic reactions to photocatalytic reactions and further to plasmonic-catalytic reactions,however,the fundamental understanding of the commonalities and differences among heterogeneous catalysis,     

Evaluation of nano-slot antenna for mid-infrared detectors

To improve the response performance of superconducting infrared detectors, we propose using a photonic antenna with a micro-detector in conjunction with a nano-structure. In this paper, we report evaluation results that show the basic characteristics of a photonic antenna in the mid-infrared region. The antenna consists of a nano-slot antenna and a thin-film load resistance placed in the center of the antenna. The antennas were designed for operation at approximately several tens of THz by using an electromagnetic simulator. Through measurements of the spectral reflectance characteristics, clear absorptions caused by the antenna properties were observed at approximately 50 THz, and high polarization dependencies were also observed. The results of the simulation qualitatively agreed with the results of the experiment. The effective area of the antenna was also evaluated and was found to be approximately 3.5 μm² at 54 THz.