Data-driven Arbitrary Polynomial Chaos Expansion on Uncertainty Quantification for Real-time Hybrid Simulation Under Stochastic Ground Motions

Experimental Techniques - Uncertainties in real-time hybrid simulation include structural parameters and ground motion. Uncertain parameters often do not follow common distribution types....     

一类变号(k,n-k)共轭边值问题正解的存在性

通过构造一个特殊的锥,利用范数形式的锥拉伸锥压缩不动点定理,在允许非线性项变号无下界且没有任何单调性假设的条件下,得出了一类高阶(k,n-k)共轭两点边值问题方程组正解的存在性结论.     

Decay of solutions to a new Hall–MHD system in R3

This paper discusses the large-time behavior of solutions for a new Hall–MHD system in ${\mathbb{R}}^3$. Using the Fourier splitting method, we establish the upper bound of the time-decay rate in $L^2({\mathbb{R}}^3)$ for weak solutions.     

GPS测量技术在锡山市地面沉降研究中的应用

通常研究认为, 苏锡常地区超量开采地下水是产生地面沉降最主要的因素之一。锡山市地下水开采十分强烈, 其地面沉降灾害也最为严重。为了有效地分析研究地面沉降的发生发展过程, 必须获取一定时间间隔内的地面沉降实测值, 全球定位系统 (GPS)就是一种既经济又高效的测量手段。本文在简要介绍了锡山市地质、水文地质及地下水开发利用情况的基础上, 重点阐述了运用GPS测量技术对锡山市地面沉降进行首次实测的情况, 并对其测量结果进行了系统分析, 最后对锡山市地面沉降的发展历史和现状进行了初步讨论。     

油润滑条件下ZA27／SiCp复合材料的滑动磨损行为

高能超声凝固法制备ＺＡ２７／ＳｉＣｐ复合材料，用环－块摩擦磨损试验机研究了油润滑下复合材料的滑动摩擦磨损性能，发现未增强的基体合金在重载时产生严重粘着磨损，磨损层发生软化和塑性流动，而复合性能中的ＳｉＣ颗粒暴露于磨损表面并起承载作用，从而保护基体不发生严重磨损。与基体合金相比，复合材料的摩擦系数平稳而较低，且耐磨性提高１０倍以上。     

Fatigue criteria for integrity assessment of long-span steel bridge with health monitoring

A structural health assessment (SHA) methodology is developed using data acquired from structural health monitoring (SHM) system installed on long-span bridges. A set of fatigue criteria has been proposed for pre-determining the global state of the bridge structure failure due to fatigue. This involves finding the threshold of fatigue initiation, below which the rate of fatigue damage may be undetectable under current technology or it is economically unfeasible. The state-of-art for large structures corresponds to the initiation of macro-cracks caused by the accumulation of damage generated by actual service loads for the case of bridges. In what follows, consideration is given to developing fatigue crack growth criterion based on the concept of the continuum damage mechanics (CDM). Fatigue accumulative is included in the model where a fatigue limit for multi-axial stress state is considered. The proposed criterion advocates the evolution of micro-crack growth up to the stage of macro-crack formulation. Considered are the loading histories that correspond to normal traffic loading for highways and railways, incidental or accident loadings such as those caused by typhoons and effective environmental loadings. The potential sites of damage are determined are discussed. The proposed criterion is applied to analyze the fatigue damage of the Tsing Ma Bridge with online strain history data acquired by the SHM system that is permanently installed in the bridge.     

Optical extensometer and elimination of the effect of out-of-plane motions

A novel optical extensometer is developed to estimate the local uniform strain on planar surface accurately. The proposed system consists of a shared large format lens and two image sensors, which acquire pairs of images of two isolated small regions on the object surface simultaneously. Digital image correlation (DIC) algorithm is applied to determine the relative displacement between gauge points designated on recorded pairs of images. Then local strain can be extracted after dividing the relative displacement by the scale distance. Moreover, a special experimental setup called “correction sheet” is used to eliminate the virtual strain induced by out-of-plane motions. Uni-axial tensile experiments are performed to validate the reliability and resolution of the optical extensometer, and the measurement results demonstrate that the resolution of the optical extensometer achieves 2–3 με.     

多尺度模拟与计算研究进展

简要介绍了多尺问题与研究方法.重点论述了两类常见多尺度问题的模拟计算方法与研究进展,分析了各自的优缺点和使用范围.对现有研究的局限性和存在的问题进行分析,指出了进一步研究多尺度模拟与计算的必要性.介绍了求解含有孤立缺陷问题的非局部准连续体法,MAAD等方法以及求解基于微观模型本构模拟问题的局部连续体法、HMM等方法.文章对多尺度模拟与计算的前景进行展望,提出了一些亟待解决的问题.     

基于稀疏信道重建技术的相邻多目标序贯检测算法研究

为进行强目标相关旁瓣干扰下的相邻弱目标检测,采用稀疏重建理论进行多目标方位估计。高信噪比情况下,由方位估计结果即可完成目标检测;对于低信噪比弱目标回波,为提高系统检测能力,结合方位估计结果,提出了两种检测算法,前者类似于传统CLEAN算法,从能量角度进行目标检测;后者则利用相关函数能量集中于主瓣的特点,通过计算将目标方位估计结果中非零元素置零前后匹配滤波峰值的差值,采用Page-test序贯检测器进行多目标检测。仿真和试验数据处理结果表明,相同检测概率下,第二种方法具有更加优良的弱目标检测性能。      

便携式X射线荧光光谱仪快速监测重金属土壤环境质量

便携式X射线荧光光谱仪(PXRF)作为一种新型快速测试手段具有突出的应用前景,但也存在检测范围和检测限的局限,为此本文研究PXRF仪器在快速监测土壤环境质量中Cr,Ni,Cu,Zn,Pb,Cd,As和Hg等8种重金属元素的适用性,筛选仪器可检测元素,评价检测结果准确度。具体方法是使用仪器测试重金属污染土壤样品,测试结果与电感耦合等离子体质谱分析方法(ICP-MS)测试值进行对比,评判检测结果精密度,建立PXRF仪器测试值与ICP-MS仪器测试值的线性回归关系。结果表明：(1)在监测重金属土壤环境质量时,PXRF仪器可用于检测土壤中Pb,Zn,Cr和Cu含量,但不适于检测Ni,Cd,As和Hg含量。(2)Pb和Zn测试值稍低于ICP-MS测试值,Cu偏高,而Cr过高;PXRF仪器测试值需要参照标准分析方法进行线性校正。研究结论为：便携式X射线荧光光谱仪适用于Pb,Zn,Cr和Cu等4种重金属的土壤环境质量监测,是一种简单快速、准确可靠的低成本土壤重金属分析手段。该研究的创新之处是合理规避PXRF仪器的缺点,将仪器应用于土壤环境质量监测,提高了测试结果应用价值。