Terahertz Dual-Band Near-Zero Effective Index Metamaterial Based on Double-Sided Metal Microstructure

Journal of Russian Laser Research - The zero-refractive-index metamaterials have excellent electromagnetic properties, which provide new ideas and methods to realize the control of electromagnetic...     

新型功能碳材料的高压截获

高性能功能材料在诸多领域具有广泛的应用前景,是人们一直关注的研究热点。高压可以有效地改变物质的原子间距和成键方式,是获得新型功能材料的重要途径。在碳材料的高压研究中,许多有趣的功能碳材料,如光学透明碳、高强度弹性碳和超硬非晶碳等,已经通过不同的碳前驱体合成。本文简要介绍了作者近年来在低维碳基纳米复合材料高压研究中取得的进展,基于设计的不同低维碳前驱体,高压下截获了具有超硬特性、新型压致共价聚合及发光增强的碳材料。     

Hydrogen-Bond Cyclization Programming of Ultrasensitive Esters and Its Application in Gene Delivery

The ester bond as a universal linker has recently been applied in gene delivery systems owing to its efficient gene release by electrostatic repulsion after its cleavage. However, the ester bond is nonlabile and is difficult to cleave in cells. This work reports a method in which a secondary amine was introduced to the β-position of the ester bond to generate a hydrogen-bond cyclization (HBC) structure that can make the ester bond hydrolysis ultrafast. A series of molecules comprising ultrasensitive esters that can be activated by H₂O₂ were synthesized, and it was found that those able to form an HBC structure showed complete ester hydrolysis within 5 h in both water and phosphate-buffered saline solution, which was several times faster than other methods reported. Then, a series of amphiphilic poly(amidoamine) dendrimers were constructed, comprising the ultrasensitive ester groups for gene delivery; it was found that they could effectively release genes under quite a low concentration of H₂O₂ (<200 μm ) and transport them into the nucleus within 2 h in Hela cells with high safety. Their gene transfection efficiencies were higher than that of PEI_25k. The results demonstrated that the hydrogen-bond-induced ultrasensitive esters could be powerfully applied to construct gene delivery systems.     

柱面微通道板的制备及其性能研究

针对未来空间天文学应用的超分辨率光谱成像仪器的需求，对低噪声柱面微通道板（MCP）的制备方法及其性能进行了研究. 提出了一种将光学抛光与热成型相结合的新的柱面MCP制备方法，利用不含放射性元素的低噪声MCP玻璃，制备出曲率半径为400mm、尺寸为30mm′46mm、长径比为80:1、通道直径12.5mm、通道间距15mm的柱面MCP，并将其与感应电荷楔条形阳极（WSA）组成光子计数探测器，对其暗计数率、分辨率进行了检测，暗计数率约为0.1counts/cm2×s.     

增材制造金属反射镜的发展综述

随着光学测量与遥感领域的不断发展,折反式光学系统对重量、体积和环境适应性等需求不断提高。基于增材制造技术的金属反射镜以其便于实现优化设计、快速制造和加工工艺性好等优点,逐渐获得国内外学者的关注与研究。与传统金属反射镜相比,增材制造金属反射镜可以提高反射镜的结构刚度,同时可实现更高程度的轻量化。增材制造反射镜可以满足光学系统对环境适应性和快速性的需求。本文首先讨论了金属反射镜的评价指标;其次,综述了国内外在基于增材制造技术制备金属反射镜领域的发展现状和技术参数,从增材制造金属反射镜的基体设计与制备和基体的后处理2个方面展开论述;然后,通过分析,总结了增材制造金属反射镜的技术路线和关键技术;最后,对增材制造反射镜的应用前景提出了展望。     

静止轨道高光谱海洋水色仪光学系统设计

设计了由超大口径前置望远系统和超大视场光谱仪组成的超大口径高光谱海洋水色仪.前置望远系统采用同轴三反光学系统结构,口径为4 m,视场为0.64°,焦距为21.6 m,波段范围为400~1 000nm.超大视场光谱仪采用改进的Offner结构,视场为240mm,光谱分辨率为10nm.探测器像元尺寸为15μm×15μm,4片探测器交错拼接实现400km幅宽.超大视场光谱仪在400~1 000nm的宽波段内,点列图半径的均方根值均小于3.9μm,静止轨道高光谱海洋水色仪全系统不同波长的MTF在33.3lp/mm处大于0.52,各项指标均满足应用要求.     

CaLuBO4∶Tb^3+荧光粉的制备及发光性质

采用高温固相反应法合成了不同Tb^3+掺杂浓度的CaLuBO4∶xTb^3+荧光粉,研究了样品的晶体结构和发光性质。在紫外光激发下,样品的发射光谱由Tb3+离子的5D3→7FJ(J=6,5,4)和5D4→7FJ′(J′=6,5,4,3)特征发射组成,其中位于545 nm和554 nm附近的5D4→7F5跃迁发射强度最大。荧光粉的激发光谱是由位于紫外区的Tb3+的4f-5d和f-f跃迁构成的。研究了Tb3+浓度对样品发光性质的影响。测量并分析了CaLuBO4∶xTb^3+荧光粉的5D3能级和5D4能级荧光寿命。结果表明,CaLuBO4∶xTb^3+是一种适于紫外激发的新型黄绿光荧光粉。     

核电池概述及展望

核电池具有能量密度高、工作稳定可靠、无需人工干预等优点，在需要长期稳定供电的场合具有独特优势，其中热转换式核电池(RTG)是技术最为成熟且应用最早的一类，而β辐射伏特效应核电池已有商业化案例。目前，在β辐射伏特效应核电池研究中存在着放射源自吸收效应浪费能量、转化效率低、换能器件辐射损伤严重等问题，而对于一个实际的核电池，由于放射源自身不断衰变的属性，导致源的成分及其活度随着时间而发生变化，最终影响核电池的电学性能，其影响程度需要加以深入研究。本文以时间轴的形式对核电池的发展进行了全面回顾，简要介绍多种主流类型核电池的原理和应用范围；对于β辐射伏特效应核电池，指出放射源的自吸收是其中的关键科学问题。对于使用63Ni和TiT₂放射源的核电池，给出了其电学性能随时间变化的规律；指出对于某一特定结构的β辐射伏特效应核电池设计，在前期的模拟优化环节中，精细计算是至关重要的；最后提出了将放射源与换能材料相结合、使用含有较重同位素的换能器件的设想，这些设想有利于解决放射源自吸收问题、提高核电池输出功率和减轻辐射损伤的影响。     

基于自由曲面反射镜的低投射比超短焦投影物镜的光学设计

为了设计低投射比的超短焦投影物镜,本文采用自由曲面和折反式的光路结构设计了一种具有低投射比的超短焦投影物镜系统。该物镜由一个旋转对称的折射透镜组和一个自由曲面反射镜组成。采用11.938 mm的数字微镜器件(DMD)作为空间光调制器产生图像源。采用法线加权迭代优化的方法计算自由曲面。最后,分析了系统的性能。仿真结果表明:超短焦投影物镜可在580 mm的投影距离处实现3048 mm尺寸的大屏幕投影,系统的投射比低至0.19,系统的最大畸变小于0.72%。能够满足低投射比超短焦投影物镜的设计要求。该投影系统具有低投射比、低畸变、投影效果好等优点,可为超短焦投影系统的进一步发展提供有益参考。     

Introducing voids around the interlayer of AlN by high temperature annealing

Introducing voids into AlN layer at a certain height using a simple method is meaningful but challenging. In this work, the AlN/sapphire template with AlN interlayer structure was designed and grown by metal-organic chemical vapor deposition. Then, the AlN template was annealed at 1700 ℃ for an hour to introduce the voids. It was found that voids were formed in the AlN layer after high-temperature annealing and they were mainly distributed around the AlN interlayer. Meanwhile, the dislocation density of the AlN template decreased from 5.26×10⁹ cm^-2 to 5.10×10⁸ cm^-2. This work provides a possible method to introduce voids into AlN layer at a designated height, which will benefit the design of AlN-based devices.