Double Gaussian potential stochastic resonance method and its application in centrifugal fan blade crack detection

Stochastic resonance (SR) has been extensively utilized in the field of weak fault signal detection for its characteristic of enhancing weak signals by transferring the noise energy. Aiming at solving the output saturation problem of the classical bistable stochastic resonance (CBSR) system, a double Gaussian potential stochastic resonance (DGSR) system is proposed. Moreover, the output signal-to-noise ratio (SNR) of the DGSR method is derived based on the adiabatic approximation theory to analyze the effect of system parameters on the DGSR method. At the same time, for the purpose of overcoming the drawback that the traditional SNR index needs to know the fault characteristic frequency (FCF), the weighted local signal-to-noise ratio (WLSNR) index is constructed. The DGSR with WLSNR can obtain optimal parameters adaptively, thereby establishing the DGSR system. Ultimately, a DGSR method is proposed and applied in centrifugal fan blade crack detection. Through simulations and experiments, the effectiveness and superiority of the DGSR method are verified.     

Co-POM@MOF-derivatives with trace cobalt content for highly efficient oxygen reduction

A simple and effective method for constructing highly efficient oxygen reduction catalysts with trace amount of isolated cobalt was firstly developed by the pyrolysis of Co-centered polyoxometalate@metalorganic framework （Co-POM@MOF）.The Co-centered polyoxometalate ([Co W₁₂O₄₀]^6-) was confined in the well-defined void space of ZIF-8 to achieve homogeneous dispersion of polyoxoanions,where the isolated Co centers were well surrounded by the W-O shell and ZIF-8 fra...     

TBOR-shaped electro-optic modulator with dual output based on double-layer graphene

We proposed an electro-optic modulator with two-bus one-ring (TBOR) structure to improve the extinction ratio and reduce insert loss. It has a dual output compared with one-bus one-ring structure. In addition, double-layer graphene makes it possible for the modulation in the visible to mid-infrared wavelength range. It shows that this new electro-optic modulator can present two switching states well with low insertion loss, high absorption and high extinction ratio. At $\lambda =1550\text{ nm}$, when the switching states are based on the chemical potential, ${\mu }_{\mathrm{c}}=0.38\text{ eV}$ and ${\mu }_{\mathrm{c}}=0.4\text{ eV}$, the insertion losses of both output ports are less than 2 dB, the absorption of the output port coupled via a micro-ring reaches 45 dB and the extinction ratio reaches 14 dB. When the refractive index of the dielectric material is 4.2, the applied voltage will be less than 1.2 V, thus can be used in low-voltage CMOS technology.     

Research and application of coupled two-dimensional asymmetric bistable stochastic resonance system

Considering that the vibration signal of rolling bearing is very weak and difficult to be extracted under the working environment noise, a two-dimensional asymmetric bistable system (TDAB) is proposed. The system is coupled by two systems, and the weak signal is enhanced by adjusting the control system (monostable system) to adjust the controlled system (asymmetric bistable system). First, under the condition of adiabatic approximation system, the signal-to-noise ratio (SNR) is deduced, and analyzes the influence of different system parameters on the shape of potential function. Then the effects of each parameter on the SNR of the system are analyzed theoretically. Finally, combined with the adaptive intelligent algorithm, the parameters of the controlled system are optimized, and then the coupling coefficient and control system parameters are adjusted to obtain better system performance. The TDAB system obtained is applied to different bearing fault diagnosis and compared with different coupling systems. The experimental results show that the method can extract the characteristic frequency effectively and has good spectrum amplification performance and anti-noise capability. It is proved that the TDAB system can also have good detection effect in practical application.     

Research progress of tunnel-type sodium manganese oxide cathodes for SIBs

Among the large energy storage batteries, the sodium ion batteries（SIBs） are attracted huge interest due to the fact of its abundant raw materials and low cost, and has become the most promising secondary battery. Tunnel-type sodium manganese oxides（TMOs） are industrialized cathode materials because of their simple synthesis method and proficient electrochemical performance. Na_0.44MnO₂（NMO） is considered the best candidate material for all tunnel-type structural materials. ...     

Influence of external load on friction coefficient of Fe-polytetrafluoroethylene

A coarse-grained molecular dynamics simulation model was developed in this study to investigate the friction process occurring between Fe and polytetrafluoroethylene(PTFE).We investigated the effect of an external load on the friction coefficient of Fe–PTFE using the molecular dynamics simulations and experimental methods.The simulation results show that the friction coefficient decreases with the external load increasing,which is in a good agreement with the experimental results.The high external load could result in a larger contact area between the Fe and PTFE layers,severer springback as a consequence of the deformed PTFE molecules,and faster motion of the PTFE molecules,thereby affecting the friction force and normal force during friction and consequently varying the friction coefficient.     

Weak fault feature extraction method based on compound tri-stable stochastic resonance

In the presence of strong background noise, in view of the difficulty in extracting weak fault features, a new compound tri-stable stochastic resonance (CTSR) model is proposed by combining the Gaussian Potential model and the mixed bi-stable model. Compared with the traditional tri-stable stochastic resonance (TTSR) method, all parameters of CTSR model have no coupling characteristics. Therefore, the output signal-to-noise ratio (SNR) can be easily optimized by adjusting the system parameters. The CTSR model retains the advantages of constraint and continuity of the Gaussian Potential model, and has a higher utilization rate of noise. Finally, through bearing and engineering experiments, the outstanding advantages of the proposed method in feature extraction of weak faults are verified.