Construction of Renewable Superhydrophobic Surfaces via Thermally Induced Phase Separation and Mechanical Peeling

We report a simple preparation method of a renewable superhydrophobic surface by ther-mally induced phase separation (TIPS) and mechanical peeling. Porous polyvinylidene fluo-ride (PVDF) membranes with hierarchical structures were prepared by a TIPS process under different cooling conditions, which were confirmed by scanning electron microscopy and mer-cury intrusion porosimetry. After peeling off the top layer, rough structures with hundreds of nanometers to several microns were obtained. A digital microscopy determines that the surface roughness of peeled PVDF membranes is much higher than that of the original PVDF membrane, which is important to obtain the superhydrophobicity. Water contact angle and sliding angle measurements demonstrate that the peeled membrane surfaces display super-hydrophobicity with a high contact angle (152°) and a low sliding angle (7.2°). Moreover, the superhydrophobicity can be easily recovered for many times by a simple mechanical peel-ing, identical to the original superhydrophobicity. This simple preparation method is low cost, and suitable for large-scale industrialization, which may offer more opportunities for practical applications.     

Layer Dependence of Graphene for Oxidation Resistance of Cu Surface

We studied the oxidation resistance of graphene-coated Cu surface and its layer dependence by directly growing monolayer graphene with different multilayer structures coexisted, di-minishing the influence induced by residue and transfer technology. It is found that the Cu surface coated with the monolayer graphene demonstrate tremendous difference in oxidation pattern and oxidation rate, compared to that coated with the bilayer graphene, which is considered to be originated from the strain-induced linear oxidation channel in monolayer graphene and the intersection of easily-oxidized directions in each layer of bilayer graphene, respectively. We reveal that the defects on the graphene basal plane but not the boundaries are the main oxidation channel for Cu surface under graphene protection. Our finding indi-cates that compared to putting forth efforts to improve the quality of monolayer graphene by reducing defects, depositing multilayer graphene directly on metal is a simple and effective way to enhance the oxidation resistance of graphene-coated metals.     

Orientation and Structure of Ionic Liquid Cation at Air/[bmim][BF4] Aqueous Solution Interface

The watermiscible room temperature ionic liquid 1butyl3methylimidazolium tetrafluorob orate （[bmim] [BF4]） is a model system for studying the interactions between ionic liquid and water molecules. In this work the orientational structure of the low concentrated aqueous solution of [bmim] [BF4] at the air/liquid interface was investigated by sum frequency gener ation vibrational spectroscopy. It has been found that at very low concentrations, the butyl chain exhibited a significant gauche defect, indicating a disordered conformation; and the cation ring oriented with a fairly small tilting angle at the surface. When the concentration increased, the cation ring tended to lie flat at the surface, and the gauche defects of the butyl chain decreased due to the intermolecular chainchain interactions and the consequent more ordered interfacial molecular arrangement. Additionally, the antisymmetric stretching mode in the PPP and SPS spectra exhibited a peak shift, showing that there exists more than one kind of orientation or chemical environment for the butyl CH3 group. These results may shed new light on understanding the surface behavior of watermiscible ionic liquids as well as the imidazolium based surfactants.     

Bohr Inequality for Multiple Op erators

An absolute value equation is established for linear combinations of two operators. When the parameters take special values, the parallelogram law of operator type is given. In addition, the operator equation in literature [3] and its equivalent deformation are obtained. Based on the equivalent deformation of the operator equation and using the properties of conjugate number as well as the operator, an absolute value identity of multiple operators is given by means of mathematical induction. As Corollaries, Bohr inequalities are extended to multiple operators and some related inequalities are reduced to, such as inequalities in [2] and [3].     

Rheological effect on thermocapillary flow of a liquid film jet painted on a moving boundary

In the present paper, a liquid (or melt) film of relatively high temperature ejected from a vessel and painted on the moving solid film is analyzed by using the second-order fluid model of the non-Newtonian fluid. The thermocapillary flow driven by the temperature gradient on the free surface of a Newtonian liquid film was discussed before. The effect of rheological fluid on thermocapillary flow is considered in the present paper. The analysis is based on the approximations of lubrication theory and perturbation theory. The equation of liquid height and the process of thermal hydrodynamics of the non-Newtonian liquid film are obtained, and the case of weak effect of the rheological fluid is solved in detail.     

表面等离激元协助的方向性瑞利光散射研究

The origin of the Rayleigh scattering ring effect has been experimentally examined on a quantum dot/metal film system, in which CdTe quantum dots embedded in PVP are spin-coated on a thin Au film. On the basis of the angle-dependent, optical measurements under different excitation schemes (i.e., wavelength and polarization), we demonstrate that sur-face plasmon assisted directional radiation is responsible for such an effect. Moreover, an interesting phase-shift behavior is addressed.     

基于荧光非共线光参量放大光谱技术的溶剂化动力学研究中的光谱矫正

利用荧光非共线光参量放大光谱技术测量了DCM染料乙醇溶液的溶剂化动力学过程. 实验结果表明,瞬态荧光光谱经过光谱矫正后,可以产生准确的溶剂化相关函数以及溶剂化过程中瞬态光谱峰值频率移动. 本文的工作表明荧光非共线光参量放大光谱技术有益同时关注荧光强度动力学以及光谱谱型演化的研究领域.     

含氮-空位缺陷锯齿状石墨烯纳米条带中负微分电阻和自旋过滤效应

采用第一性原理和非平衡格林函数方法,系统研究了含氮空位缺陷锯齿状石墨烯纳米条带的自旋极化输运特性．理论计算结果表明边界非对称的这类石墨纳米条带的基态具有铁磁性,由其构建的分子结中负微分电阻效应具有鲁棒性,是电极局域的态密度及依赖偏压的散射区-电极耦合作用结果．此外,在特定偏压区域还观察到几乎完美的自旋过滤效应．     

基于热致相分离法和机械撕除技术的可再生超疏水表面构建

We report a simple preparation method of a renewable superhydrophobic surface by ther-mally induced phase separation (TIPS) and mechanical peeling. Porous polyvinylidene fluo-ride (PVDF) membranes with hierarchical structures were prepared by a TIPS process under different cooling conditions, which were confirmed by scanning electron microscopy and mer-cury intrusion porosimetry. After peeling off the top layer, rough structures with hundreds of nanometers to several microns were obtained. A digital microscopy determines that the surface roughness of peeled PVDF membranes is much higher than that of the original PVDF membrane, which is important to obtain the superhydrophobicity. Water contact angle and sliding angle measurements demonstrate that the peeled membrane surfaces display super-hydrophobicity with a high contact angle (152°) and a low sliding angle (7.2°). Moreover, the superhydrophobicity can be easily recovered for many times by a simple mechanical peel-ing, identical to the original superhydrophobicity. This simple preparation method is low cost, and suitable for large-scale industrialization, which may offer more opportunities for practical applications.     

双腔热解光腔衰荡光谱仪测量大气中NO2和RNO2

A two-channel thermal dissociation cavity ring down spectroscopy (CRDS) instrument has been built for in situ, real-time measurement of NO₂ and total RNO₂ (peroxy nitrates and alkyl nitrates) in ambient air, with a NO₂ detection limit of 0.10 ppbv at 1 s. A 6-day long measurement was conducted at urban site of Hefei by using the CRDS instrument with a time resolution of 3 s. A commercial molybdenum converted chemiluminescence (Mo-CL) instrument was also used for comparison. The average RNO₂ concentration in the 6 days was measured to be 1.94 ppbv. The Mo-CL instrument overestimated the NO₂ concentration by a bias of +1.69 ppbv in average, for the reason that it cannot distinguish RNO₂ from NO₂. The relative bias could be over 100% during the afternoon hours when NO₂ was low but RNO₂ was high.