具有复合幂函数和共存吸引子的新混沌系统的动力学分析与电路仿真

构造一个具有复合幂函数的三维连续自治混沌系统。系统的状态方程仅有5项，其中一项是指数小于1的复合幂函数。该系统具有结构简单、非双曲平衡点、吸引子共存的性质，展现出了复杂的动力学行为。首先，对系统的动力学行为进行分析，包括李雅普诺夫（Lyapunov）指数谱、分岔图以及庞加莱映射等，结果表明此系统具有混沌特性。然后进行混沌系统的电路设计，电路仿真结果验证了理论分析的正确性。     

甲烷浓度对碳化硅基底金刚石薄膜摩擦性能影响

利用热丝化学气相沉积法(HFCVD)在碳化硅基底上制备金刚石薄膜,采用场发射扫描电子显微镜、拉曼光谱仪、原子力显微镜研究了在不同甲烷浓度条件下制备的金刚石薄膜表面形貌及物相组成,在干摩擦条件下通过往复式摩擦磨损实验测试并计算了已制备金刚石薄膜的摩擦系数和磨损率,结合物相分析及摩擦磨损实验结果分析了甲烷浓度的改变对金刚石薄膜摩擦磨损性能的影响。结果表明,由于甲烷气体含量的升高,金刚石薄膜结晶质量下降,薄膜由微米晶向纳米晶转变。摩擦磨损实验结果显示:3%甲烷浓度条件下制备的金刚石薄膜耐磨性较好,磨损率为2.2×10^-7 mm³/mN;5%甲烷浓度条件下制备的金刚石薄膜摩擦系数最低(0.032),磨损率为5.7×10^-7 mm³/mN,制备的金刚石薄膜的耐磨损性能相比于碳化硅基底(磨损率为9.89×10^-5 mm³/mN)提升了两个数量级,显著提高了碳化硅基底的耐磨性。     

Controlling coffee ring structure on hydrophobic polymer surface by manipulating wettability with O2 plasma

A simple and novel method is firstly reported for controlling coffee ring structure on polystyrene (PS) film surface by O₂ plasma. O₂ plasma treatment leads to the wettability change of PS surface from hydrophobic to hydrophilic. For hydrophilic PS surface the coffee ring structure is avoided relying on the motion of contact line (CL) while SiO₂ microspheres are left. The motion of the CL is produced based on the viscosity and Marangoni effect with the addition of polymer additives. For hydrophobic PS surface coffee ring structure still persists even with polymer additives because SiO₂ microspheres transfer with the motion of the CL at the beginning of droplet evaporation and accumulate at the droplet edge at late stage with the pinning of the CL. As a result, uniform and macroscale SiO₂ microspheres deposition without coffee ring structure and SiO₂ microspheres deposition with coffee ring structure are controlled by O₂ plasma. This method provides a new way to tune coffee ring structure with smart surface and may be potentially useful for a range of application at material deposition and diagnosing diseases.     

基于实际路网情境的配送车辆调度优化

在实际路网情境下结合车道数、车道宽度、路口信号灯设置等路网物理特性,构建了考虑综合交通阻抗的多车型车辆调度模型,提出了两阶段求解策略:第1阶段设计了改进A-star精确解算法用于计算客户时间距离矩阵;第2阶段针对实际路网的特征设计了混合模拟退火算法求解调度方案。以大连市某配送中心运营实例进行路网情境仿真试验,结果表明:改进A-star算法较改进Dijkstra算法具有更短的路径搜索时间;混合模拟退火算法求解结果较实际调度方案优化了13.1% 的综合成本;路网增流、区域拥堵和路段禁行三类路网情境均能对配送方案的车辆配置、路径选择、客户服务次序、作业时间和违约费用等5方面内容产生干扰,调度计划的制定需要详细考虑这些因素的变化。     

基于LIBS技术的水泥粉末在线成分分析

在工业现场生产水泥的过程中，各种成分的含量直接影响着水泥的质量，因此如何快速准确地监测水泥中各个成分的含量意义重大。采用的实验方式为，将不经过任何预处理的水泥粉末直接放入位于二维移动平台上的物料盒中，通过激光诱导击穿光谱(LIBS)直接对水泥粉末表面的不同位置进行激发检测，对得到的光谱数据首先进行归一化和主成分分析等预处理操作，然后针对水泥中Ca, Si, Al, Fe, Mg五种元素，分别建立偏最小二乘(PLS)和支持向量回归(SVR)两种定量分析模型进行方法比较。此外，对比了粉末状水泥与压片式水泥两种测量方式的结果。实验结果表明，采用粉末状水泥直接测量的方式下，针对水泥样品元素浓度与所得到的光谱中特征线强度的关系，SVR方法比PLS方法更具优势，粉末状水泥直接测量的精度接近压片式测量的精度，说明LIBS技术对水泥粉末状样品直接在线测量具有可行性。     

Strain gradient plasticity analysis of elasto-plastic contact between rough surfaces

From a microscopic point of view, the real contact area between two rough surfaces is the sum of the areas of contact between facing asperities. Since the real contact area is a fraction of the nominal contact area, the real contact pressure is much higher than the nominal contact pressure, which results in plastic deformation of asperities. As plasticity is size dependent at size scales below tens of micrometers, with the general trend of smaller being harder, macroscopic plasticity is not suitable to describe plastic deformation of small asperities and thus fails to capture the real contact area and pressure accurately. Here we adopt conventional mechanism-based strain gradient plasticity (CMSGP) to analyze the contact between a rigid platen and an elasto-plastic solid with a rough surface. Flattening of a single sinusoidal asperity is analyzed first to highlight the difference between CMSGP and J₂ isotropic plasticity. For the rough surface contact, besides CMSGP, pure elastic and J₂ isotropic plasticity analysis is also carried out for comparison. In all cases, the contact area A rises linearly with the applied load, but with a different slope which implies that the mean contact pressures are different. CMSGP produces qualitative changes in the distributions of local contact pressures compared with pure elastic and J₂ isotropic plasticity analysis, furthermore, bounded by the two.     

Compensation method for complex hysteresis characteristics on piezoelectric actuator based on separated level-loop Prandtl–Ishlinskii model

Nonlinear Dynamics - Piezoelectric ceramic actuators show nonlinear hysteresis characteristics due to material properties. In order to modify the inverse piezoelectric effect as an ideal linear...     

The development of recent high-power ultrasonic transducers for Near-well ultrasonic processing technology

With the reduction of crude oil throughout the world, enhance oil recovery technology has become a major oil research topics, which can greatly increase the recovery ratio of the crude oil before the dawning of renewable energy era. Near-well ultrasonic processing technology, as one new method, has attracted more attention for Enhanced Oil Recovery due to its low cost, good applicability and no environmental pollution in recent rears. There are two important relevant aspects about Near-well ultrasonic processing technology: (a) how to enhance the oil flow through the rocks into the pumping pool and (b) how to reduce the oil viscosity so that it can be easier to pump. Therefore, how to design a high-power ultrasonic equipment with excellent performance is crucial for Near-well ultrasonic processing technology. In this paper, recent new high-power ultrasonic transducers for Near-well ultrasonic processing technology are summarized. Each field application of them are also given. The purpose of this paper is to provide reference for the further development of Near-well ultrasonic processing technology.With the reduction of crude oil throughout the world, enhance oil recovery technology has become a major oil research topics, which can greatly increase the recovery ratio of the crude oil before the dawning of renewable energy era. Near-well ultrasonic processing technology, as one new method, has attracted more attention for Enhanced Oil Recovery due to its low cost, good applicability and no environmental pollution in recent rears. There are two important relevant aspects about Near-well ultrasonic processing technology: (a) how to enhance the oil flow through the rocks into the pumping pool and (b) how to reduce the oil viscosity so that it can be easier to pump. Therefore, how to design a high-power ultrasonic equipment with excellent performance is crucial for Near-well ultrasonic processing technology. In this paper, recent new high-power ultrasonic transducers for Near-well ultrasonic processing technology are summarized. Each field application of them are also given. The purpose of this paper is to provide reference for the further development of Near-well ultrasonic processing technology     

基于第一性原理的锂空气电池钌掺杂石墨烯正极 氧还原反应机理研究

双电解液锂空气电池因其高理论能量密度受到广泛研究,但电池正极侧氧还原反应(ORR)速率低,其反应速率是限制锂空气电池发展的主要因素之一.本文提出了以钌(Ru)掺杂单层石墨烯作为正极ORR催化剂,采用第一性原理计算nRu (n=1～3)掺杂石墨烯的电子结构和氧气在Ru掺杂石墨烯表面的吸附性能,并以过渡态搜索方法获得ORR反应路径,研究碱性溶液中Ru掺杂单层石墨烯作用下的ORR机理.研究结果表明,经Ru原子掺杂后,石墨烯能够获得稳定的掺杂结构,且电导率显著提升.同原始单层石墨烯相比,Ru掺杂石墨烯增强了对O₂的吸附能力.在三Ru(n=3)掺杂石墨烯表面进行的ORR无需克服任何能垒.此外,三Ru掺杂石墨烯表面对OH基团的吸附能最低,有利于ORR的连续进行.研究表明三Ru掺杂石墨烯有望成为一种新型的ORR催化剂以提高双电解液锂空气电池的性能.     

Tuning the electronic properties of single-walled SiC nanotubes by external electric field

The electronic properties of SiC nanotubes (SiCNTs) under external transverse electric field were investigated using density functional theory. The pristine SiCNTs were semiconductors with band-gaps of 2.03, 2.17 and 2.25 eV for (6,6), (8,8) and (10,10) SiCNTs, respectively. It was found the band gaps was reduced with the external transverse electric filed applied. The (8,8) and (10,10) SiCNTs changed from semiconductor to metals as the intensity of electric field reached 0.7 and 0.5 V/Å. The results indicate that the electronic properties of SiCNTs can be tuned by the transvers electric field with integrality of the nanotubes.