Palladium‐Catalyzed Arylation of Olefins by Triarylphosphines via CP Bond Cleavage

C? H Arylation of olefins by triarylphosphines via C? P bond cleavage has been achieved with either Pd⁰ or Pd^II catalysts. A variety of olefins and triarylphosphines are tolerated, and we inferred that both Pd⁰ and Pd^II could function directly without pre‐oxidation or pre‐reduction.     

电流对苯甲醚电催化重整过程的影响

用电催化重整方法和NiCuZn-Al₂O₃催化剂进行生物油模型化合物苯甲醚的水蒸气重整制氢研究,结果表明,在700 oC和4 A条件下,获得的最高碳转化率和氢产率分别为98.3%和88.7%,电催化重整过程中发现的电流促进效应主要归结于重整反应床中温度分布的改变和电阻丝发射的热电子影响. 利用X射线衍射方法分析了反应前后的NiCuZn-Al₂O₃催化剂结构变化. 实验导出的苯甲醚重整反应表观活化能为99.54 kJ/mol,明显高于乙醇、乙酸和生物油轻质组分的重整反应表观活化能.     

Reduction features of NO over a potassium-doped C12A7-O- catalyst

The NO reduction features over a noble-metal-free NO(x) storage/reduction catalyst ([Ca24Al28O64](4+*)4O-/K, defined as C12A7-O-/K), including the NO conversion, the N2 selectivity, and sulfur tolerance, were investigated with hydrogen and C3H6 as the reducing agents in a fixed-bed continuous flow reactor. The NO conversion and the N2 selectivity on the C12A7-O-/K catalyst mainly depends on the sample temperature, the percentage of potassium, the reducing agents, and the composition of the mixture of gases. The C12A7-O-/10%K catalyst possessed the highest selective reduction ability (to N2) among the catalysts C12A7-O-/x%K. Over 50% of NO can be reduced to N2 with H2 as the reduction agent at 550-700 degrees C. The C12A7-O-/K catalyst also shows higher NO(x) storage capacity (183.9 micromol/g at about 550 degrees C) as well as sulfur tolerance for both the NO(x) storage and the reduction processes. The catalyst characteristics and the intermediate species formed in the NO storage and reduction processes were investigated by the X-ray diffraction, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, and time-of-flight mass spectrometry. The mechanism of NO(x) reduction was addressed according to the above investigations.     

Electrochemical catalytic reforming of oxygenated-organic compounds: a highly efficient method for production of hydrogen from bio-oil

A novel approach to produce hydrogen from bio-oil was obtained with high carbon conversion (>90%) and hydrogen yield (>90%) at T<500 degrees C by using the electrochemical catalytic reforming of oxygenated-organic compounds over 18%NiO/Al(2)O(3) reforming catalyst; thermal electrons play important promoting roles in the decomposition and reforming of the oxygenated-organic compounds in the bio-oil.     

C12A7-O-催化剂的表征以及苯羟基化合成苯酚的机理

以[Ca24Al28O64]4+·4O-(C12A7-O-)为催化剂,在流动反应器中研究了苯羟基化合成苯酚的转化率以及苯酚的选择性．苯的转化率随反应温度增加而增加,苯酚的选择性与温度及反应物的组成有关．此外还通过XRD、EPR和FT-IR对催化剂的结构,表面及内部物种进行了考察．结果表明,C12A7-O-的电正性骨架结构在反应前后几乎没有任何差别,样品内部有部分O-和O2-在反应后转化为OH-．中性物种及负离子中间体分别由Q-MS和TOF-MS所检测．活性的O-和OH-被认为在苯酚形成过程中起了重要作用．     

Effective production of γ-valerolactone from biomass-derived methyl levulinate over CuOx-CaCO3 catalyst

The production of γ-valerolactone (GVL) from lignocellulosic biomass has become a focus of research owing to its potential applications in fuels and chemicals. In this study, (n)CuO_x-CaCO₃ (where n is the molar ratio of Cu to Ca) compounds were prepared for the first time and shown to function as efficient bifunctional catalysts for the conversion of biomass-derived methyl levulinate (ML) into GVL, using methanol as the in-situ hydrogen source. Among the catalysts with varied Cu/Ca molar ratios, (3/2)CuO_x-CaCO₃ provided the highest GVL yield of 95.6% from ML. The incorporation of CaCO₃ with CuO resulted in the formation of Cu⁺ species in a CuO_x-CaCO₃ catalyst, which greatly facilitated the hydrogenation of ML. Notably, CuO_x-CaCO₃ also displayed excellent catalytic performance in the methanolysis products of cellulose, even in the presence of humins. Therefore, a facile two-step strategy for the production of GVL from cellulose could be developed over this robust and inexpensive catalyst, through the integration of cellulose methanolysis catalyzed by sulfuric acid, methanol reforming, and ML hydrogenation in methanol medium.     

Features and mechanism of H- anion emission from 12 CaO x 7 Al2O3 surface

The hydrogen anion (H-) and other anionic species (O-, OH-, e-) in the gas phase, emitted from the synthesized crystal surface of 12 CaO x 7 Al2O3-H- (C12A7-H-), have been observed. The emission intensity of all the anionic species strongly depends on the sample surface temperature and the extraction field. H- has the highest emission branch ratio, and the extraction field can reduce its apparent activation energy. H- emission current at a microA/cm2-level has been achieved, which is about 4 orders of magnitude higher than that obtained from the thermal desorption process of CaH2. The observed anions of H- and OH- are attributed to their migration from the C12A7-H- cages onto the surface [i.e., Y-(cages) --> Y-(surface) --> Y-(gas phase) (Y = H, OH)]. The weak O- and electron emission would both arise from the dissociation of O2-: O2-(surface) --> O-(surface) + e-(surface) --> O-(gas phase) + e-(space).     

用低温电催化重整方法和CoZnAl催化剂进行低温生物油重整制氢

利用电化学催化重整方法和CoZnAl催化剂实现了高效的生物油重整制氢过程．研究了电流强度对氢气产率、碳转化率以及产物分布的影响．结果表明,通过催化剂的电流对氢气产量和碳转化率都有明显的促进作用,在500 oC低温重整条件下氢气产率和碳转化率分别达到大约70%和85%．此外,用XRD、XPS、TGA和BET研究了电流对催化剂的结构和性能的影响．结果表明,通电催化床中热电子对生物油中含氧有机物的重整反应起着重要的促进作用．     

Preparation and Characterization of Storage and Emission Functional Material of Chlorine Anion: [Ca24Al28O64]4+·(Cl-)3.80(O2-)0.10

通过碳酸钙、γ-三氧化二铝、氯化钙在氯气/氩气混合气气氛下的固态反应制备了一种氯负离子存储-发射功能材料[Ca₂₄Al₂₈O₆₄]⁴⁺·(Cl^-)_3.80(O^2-)_0.10(C12A7-Cl^-)．通过离子色谱、电子顺磁共振、拉曼光谱验证,C12A7-Cl^-材料中存储的负离子主要是氯负离子,浓度为(2.21±0.24)×10²¹ cm^-3,此外还有小部分的氧二价负离子、氧负离子、氧分子负离子．这与通过飞行时间质谱得到的结果一致：从C12A7-Cl^-材料表面发射出的负离子主要是氯负离子(大约90%),还有小部分的氧负离子和电子．材料结构和表观变化分别由X射线衍射和场发射扫描电子显微镜表征     

生物油及生物质炭电催化制氢

报道了以生物质热裂解产物-生物油和生物质炭为原料,利用双固定床反应器和电催化水蒸气重整方法高效制氢过程研究．获得的最大绝对氢产率达到110.9 g H₂/1 kg干生物质,气相产物包括72%H₂、26%CO₂、1.9%CO和痕量的CH₄．研究了添加生物质炭对生物油制氢效果的影响,以及重整反应温度、通入催化床的电流等反应条件对生物油和生物质炭制氢效果的影响．结果表明,生物质炭的添加使绝对氢产率增加了大约20%～45%,提