Model averaging for linear models with responses missing at random

Annals of the Institute of Statistical Mathematics - In this paper, a model averaging approach is developed for the linear regression models with response missing at random. It is shown that the...     

Multi-scale finite element simulation on large deformation behavior of wood under axial and transverse compression conditions

Acta Mechanica Sinica - Multi-scale finite element method is adopted to simulate wood compression behavior under axial and transverse loading. Representative volume elements (RVE) of wood...     

Model and nonlinear dynamic analysis of linear guideway subjected to external periodic excitation in five directions

Nonlinear Dynamics - Investigation of the dynamic characteristics of linear guideway is essential for enhancing structural performance of machine tools. However, few mechanical models are...     

密度泛函理论方法研究填料表面对聚合物摩擦化学的影响

采用超声分散法制备出氧化铝、高岭土、氧化硅/聚四氟乙烯复合材料, 使用线性往复摩擦磨损试验机对比三种复合材料的摩擦学性能. 结果表明 质量分数10%的氧化铝、高岭土能将聚四氟乙烯的磨损率降低约4个数量级, 而氧化硅仅能降低约3个数量级. 对金属对偶表面形成的转移膜的形貌和化学成分进行分析发现 氧化铝、高岭土/聚四氟乙烯在金属对偶面上形成了高度羧酸盐化的转移膜. 用密度泛函理论对三种填料表面上碳氟分子吸附过程进行模拟, 结果显示氧化铝、高岭土表面的路易斯酸性位点促进了碳氟分子的脱氟过程, 产生了更多的羧酸螯合物的中间产物; 氧化硅缺少路易斯酸性位点, 因此不能促进高度羧酸盐化的转移膜形成.     

Quantum Resources in Heisenberg XX Model Under Noisy Environment

International Journal of Theoretical Physics - In this paper, we investigate Einstein-Podolsky-Rosen steering, Bell non-locality, first-order coherence and concurrence in the spin- $\frac {1}{2}$...     

Broadband and efficient second harmonic generation in LiNbO3-LiTaO3 composite ridge waveguides at telecom-band

Broadband nonlinear frequency conversions of optical waves are widely employed in multiple areas of optics and photonics. However, the broadening of conversion bandwidth is often at a cost of reduction in efficiency, which may induce a limitation on practical applications. Here we theoretically propose a novel design of LiNbO₃ ridge waveguides on LiTaO₃ substrates which can be used for efficient and broadband second harmonic generation. Through group velocity engineering of the ridge waveguides, acceptance bandwidth over 20 nm with a high conversion efficiency of > 25%W^-1·cm^-2 is achieved at telecom-band.     

基于气体浓度定量的嗅觉刺激器优化设计

现有的基于磁共振测量的嗅觉刺激器，通过调节嗅剂液体浓度的方法可以实现不同浓度的嗅觉刺激，但随着实验进行，受到嗅剂挥发以及实验环境（温度、湿度、气流量）变化的影响，很难确保输送至鼻腔的嗅剂气体浓度的稳定性，进而影响实验结果的准确性．本研究对本实验室前期开发的嗅觉刺激装置进行改进，实现了气体浓度精确定量．改进后的嗅觉刺激器主要分为三个部分：控制系统、反馈系统和气路系统．控制系统主要实现气路系统的送气控制和嗅剂气体浓度调节；反馈系统则负责对气体浓度进行测量；气路系统则在原有基础上添加活性炭装置，降低无关因素干扰．装置改进之后，不同气路切换时间为75.2 ms，比原装置减少了1 s，有效提高刺激精度．实验结果显示，气体浓度调节前，300 s内乙醇、吡啶、乙酸戊酯嗅剂气体浓度分别下降6.7%、71.4%、79.2%，嗅剂气体浓度短时间内发生较大改变．加入气体浓度调节功能后，当气体浓度下降至目标浓度的90%时，可通过调节气泵电压改变嗅剂气流与空气气流比例，从而调节嗅剂气体浓度至目标值，其中吡啶、乙酸戊酯用时13 s．     

Visible-light-induced,autopromoted nickel-catalyzed three-component arylsulfonation of 1,3-enynes and mechanistic insights

Science China Chemistry - A light-induced, nickel-catalyzed three-component arylsulfonation of 1,3-enynes in the absence of photocatalyst is reported. This methodology exhibited mild conditions,...     

Photoelectrochemical oxygen atom transfer enabling efficient selective oxygenation

Photoelectrochemical(PEC)technique represents a promising approach to chemical transformation by harvesting sustainable solar energy.Despite the wide applications of PEC systems such as environmental remediation and solar energy conversion,the reported PEC reactions are dominated by the radical-based processes that are initiated by the single electron transfer between photo-induced carriers and adsorbed species on photoelectrode surface[1,2].For instance,hydroxyl radicals are often involved in the PEC oxidation reactions.As well known,it is a grand challenge to control the formation and evolution rates of radicals,which inevitably leads to the unsatisfactory product selectivity of PEC reactions.Naturally,such a circumstance brings about a question to the research community whether a different mechanism can be established to sustain efficient and selective oxygenation.Recently,based on their previous findings on PEC water oxidation[3,4],Zhao and coworkers[5]reported that many substrates can be oxidized in an oxygen atom transfer(OAT)pathway,a non-radical two electron process,to oxygenated products byα-Fe2O3 photoanodes.