2Skin temperature oscillation model for assessing vasomotion of microcirculation

It has been proved that there exists a certain correlation between fingertip temperature oscillations and blood flow oscillations. In this work, a porous media model of human hand is presented to investigate how the blood flow oscillation in the endothelial frequency band influences fingertip skin temperature oscillations. The porosity which represents the density of micro vessels is assumed to vary periodically and is a function of the skin temperature. Finite element analysis of skin temperature for a contra lateral hand under a cooling test was conducted. Subsequently, wavelet analysis was carried out to extract the temperature oscillations of the data through the numerical analysis and experimental measurements. Furthermore, the oscillations extracted from both numerical analyses and experiments were statistically analyzed to compare the amplitude. The simulation and experimental results show that for the subjects in cardiovascular health, the skin temperature fluctuations in endothelial frequency decrease during the cooling test and increase gradually after cooling, implying that the assumed porosity variation can represent the vasomotion in the endothelial frequency band.     

基于三次Bézier基函数插值的GM(1,1)模型背景值优化研究

本文研究了传统灰色GM(1,1)模型存在模型精度不高的问题.利用带形状参数的三次Bézier基函数,给出插值函数的表达式,并结合复化梯形公式,给定误差限的方法,获得了比传统灰色GM(1,1)模型更高精度的结果.推广了传统灰色GM(1,1)预测模型的结果.     

考虑更新延长两阶段保修的二手产品维修策略优化

针对二手产品的维修问题,给出了二手产品生命周期的定义,提出了考虑更新延长两阶段保修的维修策略模型。该策略综合考虑了产品的年龄变化、延保折扣、小修和生产损失费用等因素,从顾客的角度出发,建立以顾客期望总费用率最小化为目标的免费更换保修和按比例更换保修两种策略模型,并给出模型最优化的相关理论证明。算例研究验证了模型的有效性,并对参数的灵敏度进行了分析,文中结论可为顾客进行产品维修计划提供决策依据。     

A unified framework for mapping individual interregional high-order morphological connectivity based on regional cortical features from anatomical MRI

Building individual brain networks form the single volume of anatomical MRI is a challenging task. Furthermore, the high-order connectivity of morphological networks remains unexplored. This paper aimed to investigate the individual high-order morphological connectivity from anatomical MRI. Towards this goal, a unified framework based on six feature distances (euclidean, seuclidean, mahalanobis, cityblock, minkowski, and chebychev) was proposed to derive high-order interregional morphological features. The test-retest datasets and the healthy aging datasets were applied to analyze the reliability and the inter-subject variability of the novel features. In addition, the predictive models based on these novel features were established for age estimation. The proposed six neuroanatomical features exhibited significant high-to-excellent reliability. Certain connections were significantly correlated to biological age based on the six novel metrics (p < .05, FDR corrected). Moreover, the predicted age were significantly correlated to the original age in each regression task (r > 0.5, p < 10⁻⁶). The results suggested that the novel high-order metrics were reliable and could reflect individual differences, which could be beneficial for current methods of individual brain connectomes.     

天光背景下混浊大气中成像质量的分析方法

调制传递函数(MTF)定量描述混浊介质对图像质量的影响,它是混浊介质的固有光学特性,利用等效原理可以获得MTF从低频到高频的完整特征.在实际应用中,混浊介质中的图像质量不仅取决于介质的MTF,还与图像的背景辐射密切相关.本文从混浊大气中图像退化机理出发,理论分析了空间频域中天光背景下图像质量的退化过程.参考等效原理,提出了一种考虑天光背景的表观MTF,得到了表观MTF与介质MTF和天光背景的定量关系,从而得到了一种分析背景辐射下混浊介质中图像质量的有效便捷方法.针对图像质量优化方法,从空间频域的角度提出了一种评价原则.     

变频控制直接膨胀式太阳能热泵的数值模拟

文中通过对变频控制直接膨胀式太阳能热泵的数值模拟,指出PV/T- SAHP系统实现变频控制从而解决太阳能热泵集热器面积与压缩机的容量不匹配的关键问题是找到系统集热/蒸发器的MSS线.为变工况下太阳能热泵系统的研究提供参考.     

EPS混凝土的动态劈裂强度和能量耗散

 用分离式Hopkinson压杆对多种聚苯乙烯(expanded polystyrene，EPS)体积含量的EPS混凝土试样进行了动态劈裂实验。提出了描述EPS混凝土劈裂强度与应力率关系的经验公式，该式同时适合于静态和动态应力率，并根据实验结果拟合了系数。分析了EPS含量、粒径大小对劈裂强度和动态增强因数的影响，发现碳纤维能有效提高EPS混凝土的动态劈裂强度，尤其对于小EPS粒径混凝土。此外，还研究了试样的能量耗散随应力率的变化规律，EPS含量增加时，试样的能量耗散随应力率的增加而增加，反应出EPS颗粒具有增韧和吸能效果。     

改进SPH方法在陶瓷材料层裂数值模拟中的应用

为了探讨铝飞片撞击陶瓷材料时的层裂现象，采用改进SPH方法模拟应力波在陶瓷材料中的传播。结果表明，当离散粒子分布不均匀时，数值模拟计算的自由面速度时程曲线与实测曲线吻合良好。对比CSPM方法，改进SPH方法的精度更高。提出适用于数值模拟的陶瓷材料损伤演化方程，对脉冲载荷下陶瓷/钢层合板层裂的破坏过程进行数值模拟，结果表明，由于陶瓷的波阻抗高于钢的，且抗压强度远高于抗拉强度，因此拉应力引起的层裂破坏是主要的。即使在材料内部传播的只是弹性压缩波，当弹性波到达材料界面时，由界面反射引起的卸载波也能导致陶瓷发生层裂破坏。     

Ultrasonic-assisted synthesis of Ce doped cubic–hexagonal ZnTiO3 with highly efficient sonocatalytic activity

Ce doped ZnTiO₃ as a novel catalyst with highly efficient and stable sonocatalytic activity was synthesized via an ultrasound-assisted sol–gel method using non-ionic surfactant Pluronic F127 as structure directing agent. Synthesized samples were characterized by using various techniques, such as XRD, TEM, SEM, EDX, ​XRF, BET, DRS, and PL, and their sonocatalytic activity studied toward degradation of p-Nitrophenol as a model organic compound. The synthesized mesoporous Ce/ZnTiO₃ had mixed cubic–hexagonal phase with large surface area (118.2 m² g^–1) and narrow pore size distribution (4.9 nm). The effects of cerium concentration, calcination temperature, and calcination time on the structure and the sonocatalytic activity of Ce/ZnTiO₃ were studied in detail. XRD results were suggested that the relation between the phase structure and the catalytic activity is considerable. Significant decrease in band-gap and PL intensity was observed with increasing the cerium concentration in the ZnTiO₃. It became clear that the Ce/ZnTiO₃ (0.81 mol%) shows high sonocatalytic activity compared with pure ZnTiO₃ and other Ce/ZnTiO₃ samples as well as commercial TiO₂-P25. The possible mechanism for the enhanced sonocatalytic activity of Ce/ZnTiO₃ was discussed in details. The electrical energy consumption was also considered during sonocatalytic experiments.     

Thermal degradation mechanism of flame retarded epoxy resins with a DOPO-substitued organophosphorus oligomer by TG-FTIR and DP-MS

A novel phosphorus-containing oligomeric flame retardant, poly(DOPO substituted hydroxyphenyl methanol pentaerythritol diphosphonate) (PDPDP) was synthesized and applied to flame retarded epoxy resins. The thermal degradation behaviors of flame retarded epoxy composites with PDPDP were investigated by thermogravimetric analysis (TGA), thermogravimetric analysis/infrared spectrometry (TG-FTIR) and direct pyrolysis-mass spectrometry (DP-MS) techniques. The identification of pyrolysis fragment ions provided insight into the flame retardant mechanism. The results showed that the mass loss rate of the EP/PDPDP composites was clearly lower than pure EP when the temperature was higher than 300 °C in air or nitrogen atmosphere. The results also suggested that the main decomposition fragment ions of the EP/PDPDP composite were H₂O, CO₂, CO, benzene, and phenol. The incorporation of PDPDP can reduce the release of combustible gas and induce the formation of char layer, hence the fire potential hazard was reduced.